so what ever came of this posting ? Are these the recommended plug wires
? I have heard not to use the Accel wires. However 50 ohms per ft is
alot...Later this was followed up with 1 ohm per ft. So I would assume
that is correct. If that is correct does that then mean not to use these
wires or was this 50ohms/ft an error ? I want to put the best possible
components in place for this engine.
Thanks Phil
steven detamore wrote:
>
> Phil,
> i don't know about choice but i'm running MSD 8.5 Super
> conductors. you can get them at any good auto speed shop, they have just 50
> ohms resistance per ft. many "hy perf" wires are 1500 ohm per ft. most stock
> bike wires are 3000 and the Max has an extra resister in the boot.
> tell the guy at the shop you want 2- MSD 34069(replacement
> wires,these are 4ft long,cut them down to needed length) and 1- MSD 3301
> (card of 2 plug ends and boots, the wires each have one factory end on them
> and come with a splice and crip tool)
> i paid $36.79 local
> steve #1131
>
> >From: Phil <[EMAIL PROTECTED]>
> >Reply-To: [EMAIL PROTECTED]
> >To: V-MAX TECH LIST <[EMAIL PROTECTED]>
> >Subject: Spark Plug Wires.
> >Date: Thu, 08 Jun 2000 12:42:02 -0600
> >
> >I was curious what the spark plug wire of choice is ? and where to get
> >it from. I have a cylinder running rich and it could be the plug wire.
> >
> >Thanks Phil
> >.............................................
> >To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> >.............................................
>
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> .............................................
> To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> .............................................
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
