I agree, I have done it manyyyyyyy times. I did not realize how often I did
it till I got a rev limiter!!! Ask any of the performance Max builders and
they will tell you that over rev's are a Max killer.
=====================
Thomas and Carrie Powell
1994 NOS Tourmaster
"LAFGAS"
[EMAIL PROTECTED]
=====================
----- Original Message -----
From: Jeff Cain <[EMAIL PROTECTED]>
To: V-MAX TECH LIST <[EMAIL PROTECTED]>
Sent: Friday, June 23, 2000 3:23 PM
Subject: Re: [Vmax] Tourmaster Stage 7 tuning
> At 03:51 PM 6/23/00 -0600, you wrote:
> >Rick Slan wrote:
> > >
> > > I'd be careful about running through redline. You may run into valve
float
> > > where the valves don't have sufficient time to get out of the piston's
way.
> > > There's a certain amount if inertia in the movement of the valves and
if
> > > your RPM is too high, the piston will nick the valve.
> > >
>
>
> I don't even want to guess how many times I have touched ten five or
higher
> when doing something a tad on the wild side. I do not think the valves
will
> hit unless you break something.
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
