Simon,
You got it ............. I was just punching in 60-65 mph in the
spreadsheet when I read your reply. Of course 60-65mph on a stocker is
3800-4150 RPM ...... just at the point before seriously starting to
open the slides ...... dirty pilots .. dirty pilots ... dirty pilots
..... ;>)
I don't know what a 'blue indigo' pipe is Larry .. but if you have had
this problem since adding the pipe and the k&n I think I would put a
shim under the needles, (one .020). This will help at the RPM you are
experiencing difficulty ... but of course .. blow out the carbs first
and see if that doesn't straighten things out.
campbell
----- Original Message -----
From: "cybersymes" <[EMAIL PROTECTED]>
Subject: Re: tech question
> --- "Larry Langley (langleyl)" <[EMAIL PROTECTED]>
> wrote: > I have a 97 max and at around 60 to 65 the
>> motor seems to run a little ragged before 60 it is
>> smooth after 65 ....
>> snip<
> > k&n filter,indigo exhaust
>> snip <
>> they say there pipe will work w/stock jetting ...
>
> soundz similar to a problem i've just sorted...
> 'hesitation' happened to my max around
> 4500 rpm...
> snip <
> crap in the pilot jetz...easily sussed...
> blow out with compressed air...
> snip <
> good luck...simon... :)
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
