I don't know if it applies but thought I'd share:
Most thread locking compounds are designed to hold against specific heat
range. I have found that most will become brittle (like Loc-Tite 721 for
example) when chilled.
Cool the part (freezer, dry ice). Use a small impact driver to remove or
break loose the fasteners.
Mike Oberle /1990 Shiny-Black MonkeyMax
VMOA #1355 / AIM - "Injuhneer"
-----Original Message-----
From: donald smith [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 21, 2000 5:26 PM
To: V-MAX TECH LIST
Subject: Re: fywheel cover removal
Scott, you may want to have a small torch handy. They use a thread
sealant and I've had the heads snap off. Use a small amout of heat on
the side of the bolts till it starts to turn. If it gets tight again, a
little more heat until its out.
Don "Old Man" Smith
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
