on 9/8/00 4:14 PM, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote:
> In regard to blowing out the jets with the carbs still on the bike. Wouldn't
> it be better to use carb cleaner rather than air?
>
> Kraig
Good to fill the bowls with cleaner THEN blow with compressed air. The
larger brass things at the top are the jets in question. Not really
necessary to take out the adjustment screws under the brass plugs. Not
enough pressure with a spray can. I've tried it with a low-pressure
compressor. Not enough oomph. You need the better part of a hundred psi to
be effective.
best,
Sat Tara
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
