Thank You TIM!
It looks like you have a pre 93 model?
Those are the type of numbers I was looking for. I couldn't figure out
why they cant just give you the figures in ounces? The instructions for
my application said to set the level at 160. I'm thinkin' 160 what?
milliliters, cc's?... I heard it was millimeters measured from the top
of the oil to the bottom of the cap? Anyway, thanks. I think I did
everything right.
Vern
[EMAIL PROTECTED] wrote:
>
> In a message dated 09/30/2000 11:33:14 PM Central Daylight Time,
> [EMAIL PROTECTED] writes:
>
> <<
> I'd like to compare notes from those who installed emulators,
>
> On 43 mm forks, what
>
> Oil weight did you use?
>
> Was the amount of oil?
>
> Did you use
> Progressive or Racetech spring?
>
> thanks
> Vern
> .............................................
> Vern, I used 22 ounces (per fork) of 15wt synthetic Bardahl fork oil.
> I set the emulators at 2-3/4 turns with a 9-1/2" pre load spacers. I use
> Works performance fork springs with no crossover tube. With my weight at 170
> plus riding gear this is about right for my sport-touring style of riding.
> Tim VMOA #1036
> .............................................
> To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> .............................................
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
