Thank you very much Mr.Larry McGowan,with the help from your instruction and
the help from a friend,We solve the problem.Thank You again.
----- Original Message -----
From: Larry McGowan <[EMAIL PROTECTED]>
To: V-MAX TECH LIST <[EMAIL PROTECTED]>
Sent: Saturday, October 14, 2000 5:37 AM
Subject: re: installation of a horn's relay
> Hi Tan Hang Siah,
>
> My relay terminals are labeled as follows:
>
> 30-H - Terminal for lights or horn
> 87-B - Terminal from power source
> 86-S - Terminal from switch
> 85-M - Terminal for relay ground wire
>
> I have wired my Max Horn as follows:
>
> 30-H - connects directly to ONE of the terminals on EACH of your new
> horns.
> The other horn terminals will be grounded to a convenient bolt on the
> chassis somewhere.
> My horns did not have a polarity shown on the terminals.
>
> 87-B & 86-S are BOTH connected to a +12V (inline 30A fuse) lead brought
> from the positive terminal of the battery. I just pigtailed the lead
> with a 2 inch section to get to the other terminal (I wanted to be able to
use
> the horn without having the key on.....if you don't like that idea, use a
> source of +12V that is switched by the key to 86-S
>
> 85-M - this is the pink wire that originally ran to one of the horn
> terminals of your "old" horn
> The tan wire that went to the other terminal is no longer used at all.
> Tape it up out of the way.
>
> The horn button is the "ground" to complete the circuit. Good luck!!
>
> Larry McGowan VMOA#114
>
>
> Tan Hang Siah wrote:
>
> > Trying to install a set of horn today,and following the step-by-step
> > instruction on the "Fitting a real horn on your vmax",but when come to
the
> > connection on the relay,don't know which wire go to which pin on the
> > relay,hope that someone can help me.Thank you.Also don't understand the
> > number beside the pin e.g.30,87.87 etc
> >
> > .............................................
> > To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> > .............................................
>
> --
>
>
> .............................................
> To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
> .............................................
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................