> I have installed Flander's drag bars P/N 650-04091 on the max. I have
heard
> on the list that K&N has stopped making theirs. I went with the Flanders
> because the center section was 9" wide wich gave me room to add my
pressure
> gage and shift light before the bend starts. The bars are 18" high, 3.5"
> pullback, 9" center and 31" wide and cleared the tank without any
> modification. I trimmed 1" off of both ends to bring them in alittle. I
> have to say that my turning ability is limited by my steering stabilizer
so
> I do not know if a straight stock setup will hit the tank. I do think
that
> there is room to turn them up more if they hit. Pictures on my Photo
site.
> ===========================================
> Thomas and Carrie Powell
> 1994 NOS injected
> Tourmaster V-Max
> "LAFGAS"
> [EMAIL PROTECTED]
> http://albums.photopoint.com/j/AlbumList?u=957019
> ==========================================
>
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
