Melanie, Reading Jere Potter's post to you regarding his similar holding tank job indicates his tank cover was installed using the same method as yours. Apparently the angle iron braces attached from side to side under the front and rear of the tank cover were a different method that was introduced in '65 or '66. Maybe you'll be as lucky as Jere and your tank will be okay when removed. It might be easier to reinstall the tank and tank cover using the angle iron braces when ready rather than trying to install bolts from above or screws from below with tile or carpet on the floor above. Harvey To unsubscribe or to change to a daily Digest, please go to http://www.airstream.net/vaclist/listoffice.html If replying back to this message, please delete all the unnecessary original text from your reply.
