Window bashing, The way Land Yacht Airstream dealer in ElPaso Tx use to do it, (open for like 40 years, closed doors early 90's) they would put lots of duct tape on the inside window. Then use a hammer, "Knocking-Out Airstrem Vista View Windows" hammer, to break the glass into little pieces. Then they could remove the glass, which was stuck to the tape. Personally I wouldn't go this route. There are instructions on RJ Dial website for other ideas. Like removing the glass, removing the peeling coating. Drilling relief holes (very speciffic angles and locations) for moisture removal and such, so that you can keep the double pane glass. It's been awhile since I've been to his site, but there aer others on this list that can probably give you the exact link. --== KIMM ==-- -----Original Message----- From: John R. Kleven [mailto:[EMAIL PROTECTED]] Sent: Monday, February 26, 2001 11:55 PM To: Multiple recipients of VACList Subject: [VAC] Knocking out double paned Vista View windows I expect this is a common topic but I can't find the procedure in the archives. Just joined the list so info would be appreciated. The inside of my windows have peeled and I don't need the insulation value of double pane. I thought I had every tool known to man but I can't find my "Knocking-Out Airstrem Vista View Windows" tool anywhere! Thanks. Randy To unsubscribe or to change to a daily Digest, please go to http://www.airstream.net/vaclist/listoffice.html If replying back to this message, please delete all the unnecessary original text from your reply. To unsubscribe or to change to a daily Digest, please go to http://www.airstream.net/vaclist/listoffice.html If replying back to this message, please delete all the unnecessary original text from your reply.
