Great way to build vent cover is buy about 6 feet of 1 1/2 x 1 1/2 x 3/16
aluminum angle.Cut 4 peices with 45 degree angles on them, then have them
welded making sure they stay nice and flat and square.After you have this
done grind welds and caulk some good quality" plexi" to the top .Works
great,I 've made two pairs now all still working.You can even get colored
stuff like light blue and best of all from the ground all you see is
aluminum... 14x20 is great view!
----- Original Message -----
From: "John and Jodi Guerin" <[EMAIL PROTECTED]>
To: "Multiple recipients of VACList" <[EMAIL PROTECTED]>
Sent: Tuesday, March 27, 2001 10:28 AM
Subject: [VAC] Vent Cover
> Hey guys,
> I am looking for an aluminum vent cover to replace the plastic one that
> replaced the original. It is the the square 14x14 variety. If you have
> any leads, please let me know. I believe all that is original from new
> sources is the plastic dome variety and I don't like their exterior
> look. I would also consider turning it into a skylight, so if the very
> center were to be damaged I might be able to work around it. Thanks for
> any help you can provide.
> Jodi
> 1965 Caravel
>
>
>
>
> To unsubscribe or to change to a daily Digest, please go to
> http://www.airstream.net/vaclist/listoffice.html
>
> If replying back to this message, please delete all the unnecessary
original
> text from your reply.
>
>
>
To unsubscribe or to change to a daily Digest, please go to
http://www.airstream.net/vaclist/listoffice.html
If replying back to this message, please delete all the unnecessary original
text from your reply.
