Jerry,
The same principle of using coarse pads and then reducing the
grain to a finer pad applies to many polishes. I have found that 3M Heavy
Duty Polishing Compound in one gallon jugs and 3M double side pads with a
heavy duty polisher work as good as the pricier brands that come in a
little jar.
Bob
At 04:54 PM 5/7/01 -0400, you wrote:
>Hello All,
> It won't be long before I start polishing the 57 Overlander. Has
> anyone had any experience with the Nuvite polishes? I checked their
> internet site and it is more costly than Rolite. They suggest that you
> use a coarse
>abrasive first and then their fine polish on a corroded surface.. What
>about a finish coat? I've checked out the archives and personal pages on
>polishing but no one used Nuvite. I'm looking for the quickest and easiest
>way to do a good job. I know..I know ... it isn't easy or quick! Of
>course, I will do what it takes to make the old coach shine!
>
To unsubscribe or to change to a daily Digest, please go to
http://www.airstream.net/vaclist/listoffice.html
If replying back to this message, please delete all the unnecessary original
text from your reply.
