Hi GQ
I'll probably end up doing what you did with the silicon sealant if none of
these other suggestions work...thanks for responding
Bev
----- Original Message -----
From: Gary Quamen <[EMAIL PROTECTED]>
To: Multiple recipients of VACList <[EMAIL PROTECTED]>
Sent: Thursday, June 14, 2001 11:25 AM
Subject: [VAC] Re: Challenges with windows
>
> ----- Original Message -----
> From: "Beverly Miller" <[EMAIL PROTECTED]>
> To: "Multiple recipients of VACList" <[EMAIL PROTECTED]>
> Sent: Thursday, June 14, 2001 4:56 AM
> Subject: [VAC] Challenges with windows
>
>
> Hello Everyone,
> I'm stuck but my windows are not! I had to replace the glass (plexi) in 2
> of the windows of my '68 Land Yacht and they won't stay in! When I read
the
> manual's section for replacing windows it said "8. The bedding tape
should
> remain adhered to the glass bar and hinge. If the tape is damaged,
> replacement tape is available at your dealers service center." There is
no
> bedding tape and noone around here has even heard of it so...I tried putty
> tape but the window won't go all the way in so latches will latch and it
> doesn't really hold it in anyway...anyone know where I can get bedding
tape
> or a facsimile or have any other suggestions for me?
> Thanks
> Bev
>
> Hi Bev:
>
> I had to replace plexiglass with Lexan in a couple of my windows. I
bedded
> the Lexan in the hinge extrusion with clear Silicon Sealant. Once cured
it
> has held very well for several years now. If you do this, make sure you
> clean all of the residual stuff out of the groove so you can get a good
> bond.
>
> GQ '67 Safari
>
>
>
>
>
> To unsubscribe or to change to a daily Digest, please go to
> http://www.airstream.net/vaclist/listoffice.html
>
> If replying back to this message, please delete all the unnecessary
original
> text from your reply.
>
>
To unsubscribe or to change to a daily Digest, please go to
http://www.airstream.net/vaclist/listoffice.html
If replying back to this message, please delete all the unnecessary original
text from your reply.
