I did
it on my icebox at the house. I didnt have to worry about the mitered
corners...I took the 2 inches out of the center of the gasket and left the end
parts alone.
Lefty Frizzell
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Jeff Griffin
Sent: Wednesday, June 20, 2001 8:41 AM
To: Multiple recipients of VACList
Subject: [VAC] Re: Dometic Frig Door Gasket Replacement>Reply-To: [EMAIL PROTECTED] >To: Multiple recipients of VACList <[EMAIL PROTECTED]> >Subject: [VAC] Re: Dometic Frig Door Gasket Replacement >Date: Wed, 20 Jun 2001 08:18:44 -0500 > >There are generic refrigerator door gaskets sold at Home Depot or Lowes >that could be modified to fit your needs. > >If the new ones have a flap that fits into a door slot, you should be >able to put screws into the flat and screw it right to the door. > > > > >Lefty Frizzell >http://home.earthlink.net/~leftyfrizzell > > > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED]] On Behalf Of pryner >Sent: Wednesday, June 20, 2001 7:46 AM >To: Multiple recipients of VACList >Subject: [VAC] Re: Dometic Frig Door Gasket Replacement > > >Jeff, >If you find one, let me know. I've been looking for one for about a >month now. Had a couple of leads, but all led to dead ends. Even had >the name of a manufacturer that was supposed to be able to make one, but >no luck. Seems that the new seals fit into a slot in the doors where >the old ones are flat and are screwed into place. No one makes the old >type. You can reach me off list at [EMAIL PROTECTED] There are a >few old doors out there but prices are a little high. >Pete > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED]]On Behalf Of Jeff Griffin >Sent: Tuesday, June 19, 2001 7:59 PM >To: Multiple recipients of VACList >Subject: [VAC] Dometic Frig Door Gasket Replacement > >Hi everyone: >Does anyone know a dealer of Dometic Refrigerator parts who would stock >door gaskets? >Jeff >1968 Caravel > > > > _____ > >Get your FREE download of MSN Explorer at http://explorer.msn.com >To unsubscribe or to change to a daily Digest, please go to >http://www.airstream.net/vaclist/listoffice.html If replying back to >this message, please delete all the unnecessary original text from your >reply.lefty:
I like the idea od modifying a gasket found at Home Depot or Lowes. Have you done this personally, or just heard of it being done? What would be the best adhesive to bind the mitered rubber corner(s) together.
jeff
1968 Caravel
>From: lefty frizzell <[EMAIL PROTECTED]>
Get your FREE download of MSN Explorer at http://explorer.msn.com
To unsubscribe or to change to a daily Digest, please go to http://www.airstream.net/vaclist/listoffice.html If replying back to this message, please delete all the unnecessary original text from your reply.
