Likewise if you do the same thing with a Ubuntu 14.04 basebox, it appears to hang at ==> default: Configuring network adapters within the VM... for quite some time.
jeff. On Monday, September 15, 2014 1:59:21 PM UTC-3, Jeff MacDonald wrote: > > HI, > > I'm trying to set a static ip address on my public_network. My home > network is 10.0.1.0/24 and I'd like the host to be on that. > > My line inside my Vagrantfile is as follows: > > config.vm.network "public_network", ip: "10.0.1.111" > > When i run vagrant up && vagrant ssh then ifconfig -a, a new interface > eth1 is created however its clearly getting its ipaddress via DHCP. > > eth1 Link encap:Ethernet HWaddr 00:0C:29:78:F7:1F > inet addr:10.0.1.215 Bcast:10.0.1.255 Mask:255.255.255.0 > inet6 addr: fe80::20c:29ff:fe78:f71f/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:316 errors:0 dropped:0 overruns:0 frame:0 > TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:28658 (27.9 KiB) TX bytes:1236 (1.2 KiB) > > [vagrant@localhost ~]$ vi /etc/sysconfig/network-scripts/ifcfg-eth1 > [vagrant@localhost ~]$ cat !$ > cat /etc/sysconfig/network-scripts/ifcfg-eth1 > #VAGRANT-BEGIN > # The contents below are automatically generated by Vagrant. Do not modify. > BOOTPROTO=dhcp > ONBOOT=yes > DEVICE=eth1 > #VAGRANT-END > > So, vagrant is ignoring the IP address for public networks. > > My environment is as follows: > > Host : Mavericks > Guest : Centos 6.5 > Vagrant: 1.6.5 > Using the VMWare Fusion provider. > > Thoughts? > > Jeff. > > > > > > > -- You received this message because you are subscribed to the Google Groups "Vagrant" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
