Thanks,
I tried what you said,
But, now it seems i cannot connect to my machine before i package it:
brunis@pingu:~/vagrant$ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'chef/debian-7.6' is up to date...
==> default: Fixed port collision for 22 => 2222. Now on port 2200.
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports...
default: 3000 => 1234 (adapter 1)
default: 5432 => 8888 (adapter 1)
default: 22 => 2200 (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2200
default: SSH username: vagrant
default: SSH auth method: private key
default: Warning: Connection timeout. Retrying...
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
==> default: Configuring and enabling network interfaces...
==> default: Rsyncing folder: /home/brunis/vagrant/ => /vagrant
==> default: Machine already provisioned. Run `vagrant provision` or use
the `--provision`
==> default: to force provisioning. Provisioners marked to run always will
still run.
*SSH to vagrant and ran what you suggested *
me@host:~/vagrant$ vagrant halt
==> default: Attempting graceful shutdown of VM...
* default: Guest communication could not be established! This is usually
because*
* default: SSH is not running, the authentication information was
changed,*
* default: or some other networking issue. Vagrant will force halt, if*
* default: capable.*
==> default: Forcing shutdown of VM...
me@host:~/vagrant$ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'chef/debian-7.6' is up to date...
==> default: Clearing any previously set forwarded ports...
==> default: Fixed port collision for 22 => 2222. Now on port 2200.
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports...
default: 3000 => 1234 (adapter 1)
default: 5432 => 8888 (adapter 1)
default: 22 => 2200 (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2200
default: SSH username: vagrant
default: SSH auth method: private key
default: Warning: Connection timeout. Retrying...
* default: Warning: Authentication failure. Retrying...*
default: Warning: Authentication failure. Retrying..
Den onsdag 25 mars 2015 kl. 10:02:33 UTC+1 skrev Alvaro Miranda Aguilera:
>
> Hello,
>
> The IP looks good, so I will suggest ensure the public ssh key is there
>
> This is what I use to setup a Vagrant box:
>
> "useradd vagrant",
>
> "cp /etc/sudoers /etc/sudoers.orig",
>
> "sed -i -e 's/Defaults\\s*requiretty$/#Defaults\trequiretty/'
> /etc/sudoers",
>
> "sed -i -e '/# %wheel\tALL=(ALL)\tNOPASSWD: ALL/a
> %vagrant\tALL=(ALL)\tNOPASSWD: ALL' /etc/sudoers",
>
> "mkdir ~vagrant/.ssh",
>
> "chmod 700 ~vagrant/.ssh",
>
> "echo 'ssh-rsa
> AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ==
>
>
> vagrant insecure public key' > ~vagrant/.ssh/authorized_keys",
>
> "chmod 600 ~vagrant/.ssh/authorized_keys",
>
> "chown -R vagrant: ~vagrant/.ssh",
>
> "cp /etc/ssh/sshd_config /etc/ssh/sshd_config.ori",
>
> "sed -i -e '/#UseDNS yes/a UseDNS no' /etc/ssh/sshd_config",
>
> "for nic in /etc/sysconfig/network-scripts/ifcfg-*; do sed -i
> /HWADDR/d $nic; sed -i /UUID/d $nic || true ; done",
>
> "rm /etc/udev/rules.d/??-persistent-net.rules || true"
>
>
> Remote "" and "", and see what you can reuse.
>
> Hope this helps.
>
> Alvaro.
>
> On Wed, Mar 25, 2015 at 9:32 PM, Marcus Brunsten
> <[email protected] <javascript:>> wrote:
> > The file /etc/udev/rules.d/70-persistent-net.rule did not exist. the
> > directory /etc/udev/rules.d/70-persistent-net.rules/ existed however,
> should
> > i remove this? It is empty.
> >
> > Output of ifconfig -a
> > root@packer-debian-7:/etc/udev/rules.d# ifconfig -a
> > eth0 Link encap:Ethernet HWaddr 08:00:27:45:b0:85
> > inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fe45:b085/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:1062 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:672 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:106692 (104.1 KiB) TX bytes:80168 (78.2 KiB)
> >
> > eth1 Link encap:Ethernet HWaddr 08:00:27:d0:29:cb
> > inet addr:192.168.56.30 Bcast:192.168.56.255
> Mask:255.255.255.0
> > inet6 addr: fe80::a00:27ff:fed0:29cb/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:0 (0.0 B) TX bytes:1086 (1.0 KiB)
> >
> > lo Link encap:Local Loopback
> > inet addr:127.0.0.1 Mask:255.0.0.0
> > inet6 addr: ::1/128 Scope:Host
> > UP LOOPBACK RUNNING MTU:16436 Metric:1
> > RX packets:38 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:21265 (20.7 KiB) TX bytes:21265 (20.7 KiB)
> >
> >
> > Den tisdag 24 mars 2015 kl. 21:39:39 UTC+1 skrev Alvaro Miranda
> Aguilera:
> >>
> >> On Wed, Mar 25, 2015 at 4:46 AM, Marcus Brunsten
> >> <[email protected]> wrote:
> >> > default: Warning: Authentication failure. Retrying...
> >>
> >> Hello,
> >>
> >> Can you try to connect over the gui and share an ifconfig -a
> >>
> >> before packaging the box, check if
> >> /etc/udev/rules.d/70-persistent-net.rule file exists, if does, delete
> >> it.
> >>
> >> Thanks
> >> Alvaro
> >
> > --
> > You received this message because you are subscribed to the Google
> Groups
> > "Vagrant" group.
> > To unsubscribe from this group and stop receiving emails from it, send
> an
> > email to [email protected] <javascript:>.
> > For more options, visit https://groups.google.com/d/optout.
>
--
You received this message because you are subscribed to the Google Groups
"Vagrant" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
