can we see the hosts file and playbook?
also, could you make a simplified version to isolate the condition? you
might find the problem while making it.
On Sunday, March 20, 2016 at 11:00:04 PM UTC-7, Stephen Knight wrote:
>
> Hi All,
>
> I am hoping someone can help, I have a Vagrantfile which uses the Ansible
> provisioner and it works, everything boots in serial and the installation
> kicks off via the Ansible Playbook. The issue however is that after
> successful completion, the Ansible job starts again right back at the
> beginning. The Vagrantfile is below:
>
> # -*- mode: ruby -*-
> # vi: set ft=ruby :
>
>
> Vagrant.require_version ">= 1.8"
>
>
> Vagrant.configure(2) do |config|
>
> config.vm.define "supervisor-01" do |supervisor|
> supervisor.vm.network "private_network", ip: "192.168.9.31"
> supervisor.vm.box = "centos/7"
> supervisor.vm.hostname = "supervisor-01"
> supervisor.vm.synced_folder ".", "/vagrant", id: "vagrant-root",
> disabled: true
>
> supervisor.vm.provider :virtualbox do |vb|
> vb.customize ["modifyvm", :id, "--macaddress1", "auto"]
> vb.memory = 1536
> vb.cpus = 2
> vb.name = "supervisor-01"
> line = `VBoxManage list systemproperties | grep "Default machine
> folder"`
> vb_machine_folder = line.split(':')[1].strip()
> second_disk = File.join(vb_machine_folder, vb.name, 'disk_b.vdi')
>
>
> vb.customize ['createhd', '--filename', second_disk, '--format',
> 'VDI', '--size', 6 * 1024]
> vb.customize ['storageattach', :id, '--storagectl', 'IDE
> Controller', '--port', 0, '--device', 1, '--type', 'hdd', '--medium',
> second_disk]
> end
> end
>
> config.vm.define "controller-01" do |controller1|
> controller1.vm.network "private_network", ip: "192.168.9.21"
> controller1.vm.box = "centos/7"
> controller1.vm.hostname = "controller-01"
> controller1.vm.synced_folder ".", "/vagrant", id: "vagrant-root",
> disabled: true
>
> controller1.vm.provider :virtualbox do |vb|
> vb.customize ["modifyvm", :id, "--macaddress1", "auto"]
> vb.memory = 2048
> vb.cpus = 1
> vb.name = "controller-01"
> line = `VBoxManage list systemproperties | grep "Default machine
> folder"`
> vb_machine_folder = line.split(':')[1].strip()
> second_disk = File.join(vb_machine_folder, vb.name, 'disk_b.vdi')
>
>
> vb.customize ['createhd', '--filename', second_disk, '--format',
> 'VDI', '--size', 100 * 1024]
> vb.customize ['storageattach', :id, '--storagectl', 'IDE
> Controller', '--port', 0, '--device', 1, '--type', 'hdd', '--medium',
> second_disk]
> end
> end
>
> config.vm.define "controller-02" do |controller2|
> controller2.vm.network "private_network", ip: "192.168.9.22"
> controller2.vm.box = "centos/7"
> controller2.vm.hostname = "controller-02"
> controller2.vm.synced_folder ".", "/vagrant", id: "vagrant-root",
> disabled: true
>
> controller2.vm.provider :virtualbox do |vb|
> vb.customize ["modifyvm", :id, "--macaddress1", "auto"]
> vb.memory = 2048
> vb.cpus = 1
> vb.name = "controller-02"
> line = `VBoxManage list systemproperties | grep "Default machine
> folder"`
> vb_machine_folder = line.split(':')[1].strip()
> second_disk = File.join(vb_machine_folder, vb.name, 'disk_b.vdi')
>
>
> vb.customize ['createhd', '--filename', second_disk, '--format',
> 'VDI', '--size', 100 * 1024]
> vb.customize ['storageattach', :id, '--storagectl', 'IDE
> Controller', '--port', 0, '--device', 1, '--type', 'hdd', '--medium',
> second_disk]
> end
> end
>
> config.vm.define "controller-03" do |controller3|
> controller3.vm.network "private_network", ip: "192.168.9.23"
> controller3.vm.box = "centos/7"
> controller3.vm.hostname = "controller-03"
> controller3.vm.synced_folder ".", "/vagrant", id: "vagrant-root",
> disabled: true
>
> controller3.vm.provider :virtualbox do |vb|
> vb.customize ["modifyvm", :id, "--macaddress1", "auto"]
> vb.memory = 2048
> vb.cpus = 1
> vb.name = "controller-03"
> line = `VBoxManage list systemproperties | grep "Default machine
> folder"`
> vb_machine_folder = line.split(':')[1].strip()
> second_disk = File.join(vb_machine_folder, vb.name, 'disk_b.vdi')
>
>
> vb.customize ['createhd', '--filename', second_disk, '--format',
> 'VDI', '--size', 100 * 1024]
> vb.customize ['storageattach', :id, '--storagectl', 'IDE
> Controller', '--port', 0, '--device', 1, '--type', 'hdd', '--medium',
> second_disk]
> end
> end
>
> config.vm.define "slave-01" do |slave1|
> slave1.vm.network "private_network", ip: "192.168.9.11"
> slave1.vm.box = "centos/7"
> slave1.vm.hostname = "slave-01"
> slave1.vm.synced_folder ".", "/vagrant", id: "vagrant-root",
> disabled: true
>
> slave1.vm.provider :virtualbox do |vb|
> vb.customize ["modifyvm", :id, "--macaddress1", "auto"]
> vb.memory = 1024
> vb.cpus = 1
> end
> end
>
>
> config.vm.define "slave-02" do |slave2|
> slave2.vm.network "private_network", ip: "192.168.9.12"
> slave2.vm.box = "centos/7"
> slave2.vm.hostname = "slave-02"
> slave2.vm.synced_folder ".", "/vagrant", id: "vagrant-root",
> disabled: true
>
> slave2.vm.provider :virtualbox do |vb|
> vb.customize ["modifyvm", :id, "--macaddress1", "auto"]
> vb.memory = 1024
> vb.cpus = 1
> end
> end
>
>
> config.vm.define "cicd-01" do |cicd|
> cicd.vm.network "private_network", ip: "192.168.9.32"
> cicd.vm.box = "centos/7"
> cicd.vm.hostname = "cicd-01"
> cicd.vm.synced_folder ".", "/vagrant", type: "rsync"
> cicd.vm.synced_folder "/var/tmp", "/var/tmp", type: "rsync"
>
> cicd.vm.provider :virtualbox do |vb|
> vb.customize ["modifyvm", :id, "--macaddress1", "auto"]
> vb.memory = 2048
> vb.cpus = 2
> cicd.vm.provision :ansible_local do |ansible|
> ansible.playbook = "ansible/vagrant.yml"
> ansible.install = true
> ansible.limit = "all"
> ansible.inventory_path = "vagrant/hosts"
> ansible.sudo = true
> ansible.extra_vars = { ansible_ssh_user: 'vagrant',
> ansible_ssh_pass: 'vagrant',
> ansible_connection: 'ssh',
> ansible_ssh_args: '-o StrictHostKeyChecking=no'}
> end
> end
> end
> end
>
> Is there any reason why the above file should run the provisioner again? I
> am completely lost as to why this is happening.
>
> Any help is appreciated.
>
> Thanks
>
--
This mailing list is governed under the HashiCorp Community Guidelines -
https://www.hashicorp.com/community-guidelines.html. Behavior in violation of
those guidelines may result in your removal from this mailing list.
GitHub Issues: https://github.com/mitchellh/vagrant/issues
IRC: #vagrant on Freenode
---
You received this message because you are subscribed to the Google Groups
"Vagrant" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/vagrant-up/70d0fb89-b934-47d6-a488-41c45b5a9e6b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
