hello check os manual documentation, you may need to install the package, enable the service, start the service.
On Sat, Apr 20, 2019 at 8:51 AM hack3rcon via Vagrant < [email protected]> wrote: > Hello. > I installed Vagrant on Debian 9 x86_64 and added a "ubuntu/trusty64" box. > I want to configure "Nginx" on "ubuntu/trusty64". I installed Nginx and > added below line to "Vagrantfile" : > > config.vm.network "private_network", ip: "192.168.1.10" > > > and turn VM off and on. My "ubuntu/trusty64" network config is: > > > eth0 Link encap:Ethernet HWaddr 08:00:27:cd:72:b7 > inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 > inet6 addr: fe80::a00:27ff:fecd:72b7/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:584 errors:0 dropped:0 overruns:0 frame:0 > TX packets:491 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:71452 (71.4 KB) TX bytes:77530 (77.5 KB) > > eth1 Link encap:Ethernet HWaddr 08:00:27:bc:9a:e1 > inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 > inet6 addr: fe80::a00:27ff:febc:9ae1/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:16 errors:0 dropped:0 overruns:0 frame:0 > TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:1112 (1.1 KB) TX bytes:2068 (2.0 KB) > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:65536 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > > And the host (Debian) network is as below: > > > ens192: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 172.20.100.64 netmask 255.255.0.0 broadcast 172.20.255.255 > inet6 fe80::20c:29ff:fe9a:d52b prefixlen 64 scopeid 0x20<link> > ether 00:0c:29:9a:d5:2b txqueuelen 1000 (Ethernet) > RX packets 278924 bytes 493487802 (470.6 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 197133 bytes 16369643 (15.6 MiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 > inet 127.0.0.1 netmask 255.0.0.0 > inet6 ::1 prefixlen 128 scopeid 0x10<host> > loop txqueuelen 1 (Local Loopback) > RX packets 9715 bytes 1298850 (1.2 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 9715 bytes 1298850 (1.2 MiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > vboxnet0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 > inet6 fe80::800:27ff:fe00:0 prefixlen 64 scopeid 0x20<link> > ether 0a:00:27:00:00:00 txqueuelen 1000 (Ethernet) > RX packets 0 bytes 0 (0.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 66 bytes 4932 (4.8 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > vboxnet3: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 > inet 192.168.33.1 netmask 255.255.255.0 broadcast 192.168.33.255 > inet6 fe80::800:27ff:fe00:3 prefixlen 64 scopeid 0x20<link> > ether 0a:00:27:00:00:03 txqueuelen 1000 (Ethernet) > RX packets 0 bytes 0 (0.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 57 bytes 4778 (4.6 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > Then I edited "nano /etc/hosts" file and added below line: > > > 192.168.1.10 lemp > > > But when I navigate to the host IP address(172.20.100.64) then I can't see > Nginx. > > How can I solve it? > > > Thank you. > > -- > This mailing list is governed under the HashiCorp Community Guidelines - > https://www.hashicorp.com/community-guidelines.html. Behavior in > violation of those guidelines may result in your removal from this mailing > list. > > GitHub Issues: https://github.com/mitchellh/vagrant/issues > IRC: #vagrant on Freenode > --- > You received this message because you are subscribed to the Google Groups > "Vagrant" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/vagrant-up/17e21560-25a3-461e-9914-056c5601cfb8%40googlegroups.com > <https://groups.google.com/d/msgid/vagrant-up/17e21560-25a3-461e-9914-056c5601cfb8%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- Alvaro -- This mailing list is governed under the HashiCorp Community Guidelines - https://www.hashicorp.com/community-guidelines.html. Behavior in violation of those guidelines may result in your removal from this mailing list. GitHub Issues: https://github.com/mitchellh/vagrant/issues IRC: #vagrant on Freenode --- You received this message because you are subscribed to the Google Groups "Vagrant" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/vagrant-up/CAHqq0eyLms6WfpOwG_jGhek_Lp3jMHaBfWfUiF2OPJTyzdZPRA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
