well, guess the information I have regarding a working time server is in fact bunk. Thanks for the input!
Mike --- On Thu, 10/1/09, Stanley Brinkerhoff <[email protected]> wrote: > From: Stanley Brinkerhoff <[email protected]> > Subject: Re: using a MS SNTP server for linux > To: [email protected] > Date: Thursday, October 1, 2009, 1:35 PM > r...@rsrvmon:~# ntpdate 192.168.11.8 > 1 Oct 13:27:35 ntpdate[7645]: adjust time server > 192.168.11.8 offset 0.012268 sec > > r...@rsrvmon:/etc# locate ntp.conf > r...@rsrvmon:/etc# > > r...@vrsrvmon:/etc# ntpdate -v > > 1 Oct 13:29:12 ntpdate[7713]: ntpdate [email protected] > Wed May 13 21:05:58 UTC 2009 (1) > > Ubuntu 8.04 LTS vs Windows 2003 Server that was setup > before me -- but it works. > > Stan > > > > On Thu, Oct 1, 2009 at 12:31 PM, Mike Raley <[email protected]> > wrote: > > Chris, > > > > The firewall on the linux server is turned off completely > for this part, so I know that's not it. It very well > could be a firewall issue on the DC, however, without a > login I cannot confirm. I can only believe what I'm > told, and that is that it's on and working... > > > > > I am curious if you have any special settings in your > ntp.conf file however? > > > > Thanks! > > Mike > > > > --- On Wed, 9/30/09, Chris <[email protected]> > wrote: > > > > > From: Chris <[email protected]> > > > Subject: Re: using a MS SNTP server > for linux > > > To: [email protected] > > > Date: Wednesday, September 30, 2009, 9:21 PM > > > I work in an > environment with > > > hundreds of Linux and Windows systems and we use our > DC's as > > > the time source for all of our systems. While it is > true > > > that older Windows systems did not work well, I have > not > > > seen any issues with 2k3's time server as an NTP > server for > > > Linux clients. > > > > > > Do you know if the Windows server has it's > firewall > > > enabled? I could see that causing problems, that > friggin > > > firewall is a total pain in the @$!. And, are you sure > that > > > iptables on your Linux server is not blocking the > outbound > > > ntp query? Check to make sure that UDP port 123 is > open. You > > > can run iptables -L to show your iptables ruleset (if > Ubuntu > > > uses iptables). > > > > > > Good luck, > > > > > > Chris Adams > > > > > > > > > > > > On Sep 29, 2009, at 10:34 AM, Mike Raley wrote: > > > > > > > Rick, any advice offered is never a waste of > > > time! Unfortunately MS claims, NTP will just > > > work. LIES! ;) > > > > > > > > specifically this is what I'm getting: > > > > r...@host-name:~# ntpdate <ip address> > > > > 29 Sep 10:31:49 ntpdate[3946]: no server suitable > for > > > synchronization found > > > > > > > > which from my investigations is what I would get > given > > > MS's crappy time deamon. > > > > > > > > thanks anyways! > > > > > > > > Mike > > > > --- On Tue, 9/29/09, Rick White <[email protected]> > > > wrote: > > > > > > > >> From: Rick White <[email protected]> > > > >> Subject: Re: using a MS SNTP server for > linux > > > >> To: [email protected] > > > >> Date: Tuesday, September 29, 2009, 10:10 AM > > > >> No wisdom here, but idle googling > > > >> turned up this TechNet document on the > subject: > > > >> Appendix H: Configuring Time Services for a > > > Heterogeneous > > > >> UNIX and Windows Environment > > > >> http://technet.microsoft.com/en-us/library/bb463171..aspx > > > >> > > > >> Some solutions involve editing the Windows > > > registry, which > > > >> is OTQ, but the last section: > > > >> http://technet.microsoft.com/en-us/library/bb463171.aspx#EAAA > > > >> might possibly be relevant. > > > >> > > > >> If this is completely off-base, sorry to > waste > > > your time. > > > >> > > > >> Rick > > > >> > > > >> --- On Tue, 9/29/09, Mike Raley <[email protected]> > > > >> wrote: > > > >> > > > >>> From: Mike Raley <[email protected]> > > > >>> Subject: using a MS SNTP server for > linux > > > >>> To: [email protected] > > > >>> Date: Tuesday, September 29, 2009, 9:44 > AM > > > >>> Morning all, > > > >>> > > > >>> I figure I know the unfortunate answer to > my > > > question, > > > >> but > > > >>> I'm hoping the wisdom of this crowd > will once > > > again > > > >> prove me > > > >>> wrong. I have an Ubuntu server which > > > needs to use a > > > >>> Windows 2003 Domain Controller as > it's > > > authoritative > > > >> time > > > >>> server. Yes, I know, this is an > > > abomination, but in > > > >>> this case 100% unavoidable. It's > either > > > this or > > > >> wildly > > > >>> off on time (bad). Has anyone actually > > > gotten this > > > >> to > > > >>> work? Using NTP is out as MS uses SNTP > > > (broken as > > > >>> usual). I've tried msntp also to > no > > > avail. > > > >>> Gladly taking suggestions! > > > >>> > > > >>> Oh, in addition, I do not even have > login > > > rights to > > > >> the DC, > > > >>> much less Administrator privileges, so > > > changing that > > > >> is out > > > >>> of the question. > > > >>> > > > >>> Thanks! > > > >>> Mike > > > >>> > > > >>> > > > >>> > > > >>> > > > >> > > > >> > > > >> > > > >> > > > > > > > > > > > > > > > > > > > > > > > > >
