Are you sure it's the same child process running? If the child dies
randomly (SEGV, etc -- check your syslogs) it might be restarting on
you.
If you're using lots of regexps you may have to increase
sess_workspace. Look for those errors in the logs.
-j
On Apr 1, 2009, at 4:11 PM, Cloude Porteus wrote:
> We've been running varnish in production for about a week and I've
> been noticing that things aren't quite right, but it's been hard to
> figure out what. Most of the time Varnish is running with a 98% hit
> ratio and all is fine. We have been running for a few days with about
> 250k documents in the cache.
>
> I just noticed that the number of documents in the cache dropped from
> ~140k -> ~30k and the LRU Nuked Objects increased by 100k. I assume
> we're hitting our storage limit, which is currently set to 10gb. We
> had it set at 50gb before, but we were still having similar problems.
> I noticed last night there was a couple of hours where it looked like
> the hit ratio was close to zero, but then it went back to normal.
>
> Any ideas what would cause Varnish to nuke ~100k objects all at once?
> I've gone over all the performance tuning info and we've tried to
> implement most of the suggestions. I'm just not sure which direction
> to start tuning further.
>
> Thanks for any suggestions. Here's our current default.vcl:
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> # Configuration file for varnish
> NFILES=131072
> MEMLOCK=82000
> VARNISH_VCL_CONF=/etc/varnish/instructables.vcl
> VARNISH_LISTEN_ADDRESS=
> VARNISH_LISTEN_PORT=80
> VARNISH_ADMIN_LISTEN_ADDRESS=127.0.0.1
> VARNISH_ADMIN_LISTEN_PORT=82
> VARNISH_MIN_THREADS=400
> VARNISH_MAX_THREADS=1000
> VARNISH_THREAD_TIMEOUT=60
> VARNISH_STORAGE_FILE=/var/lib/varnish/varnish_storage.bin
> VARNISH_STORAGE_SIZE=10G
> VARNISH_STORAGE="file,${VARNISH_STORAGE_FILE},${VARNISH_STORAGE_SIZE}"
> VARNISH_TTL=1800
>
> DAEMON_OPTS="-a ${VARNISH_LISTEN_ADDRESS}:${VARNISH_LISTEN_PORT} \
> -f ${VARNISH_VCL_CONF} \
> -T ${VARNISH_ADMIN_LISTEN_ADDRESS}:$
> {VARNISH_ADMIN_LISTEN_PORT} \
> -t ${VARNISH_TTL} \
> -w
> ${VARNISH_MIN_THREADS},${VARNISH_MAX_THREADS},$
> {VARNISH_THREAD_TIMEOUT}
> \
> -u varnish -g varnish \
> -s ${VARNISH_STORAGE} \
> -p obj_workspace=4096 \
> -p sess_workspace=262144 \
> -p lru_interval=3600
> -p listen_depth=8192 \
> -p log_hashstring=off \
> -p sess_timeout=10 \
> -p shm_workspace=32768 \
> -p ping_interval=1 \
> -p thread_pools=4 \
> -p thread_pool_min=100 \
> -p srcaddr_ttl=0 \
> -p esi_syntax=1 "
>
> thanks,
> cloude
> --
> VP of Product Development
> Instructables.com
>
> http://www.instructables.com/member/lebowski
> _______________________________________________
> varnish-dev mailing list
> varnish-dev@projects.linpro.no
> http://projects.linpro.no/mailman/listinfo/varnish-dev
---
John Adams
Twitter Operations
j...@twitter.com
http://twitter.com/netik
_______________________________________________
varnish-dev mailing list
varnish-dev@projects.linpro.no
http://projects.linpro.no/mailman/listinfo/varnish-dev
