On Tue, Aug 31, 2010 at 7:10 AM, Per Buer <[email protected]> wrote: > Hi, > > On Tue, Aug 31, 2010 at 3:52 PM, Anderson Brown <[email protected]> > wrote: >> However, when I try to restart: >> >> r...@machine>/etc/init.d/varnish restart >> Stopping varnish HTTP accelerator: [ OK ] >> Starting varnish HTTP accelerator: [FAILED] >> >> I see nothing in /var/log/messages nor in varnishlog. > > It should be logged somewhere, if not - that would be a bug. I'm not sure > where it would be appropriate to log such things on RHEL. > wrt the parameter - I _think_ this was made a run-time option in 2.1. It was > a compile time option in 2.0. > In my centos servers with the sourceforge RPMs, it is logged in /var/log/messages.
>> r...@machine>varnishd -V >> varnishd (varnish-2.0.6) >> Copyright (c) 2006-2009 Linpro AS / Verdens Gang AS >> >> Am I using an older version? Just did the varnish install via yum-EPEL. > > As 2.1 is not 100% compatible with 2.0 EPEL for EL 5.0 is stuck on 2.0. > However, there are RPM's available. > The RPMs are available on sourceforge (a link exists from the downloads section on the main varnish-cache.org home page); I have used even 2.13 without problems. I am not sure if there will be compatibility issues if you want to jump back to epel for Varnish at some point (when 2.1 is available there). There is also a bug with the DAEMON options startup script from these RPMs. You will want to change the single quotes in /etc/init.d/varnish with double quotes for the DAEMON_OPT line (as epel does). -T _______________________________________________ varnish-dev mailing list [email protected] http://lists.varnish-cache.org/mailman/listinfo/varnish-dev
