I'm still getting the "Too many open files" error on the child. $ sudo sysctl -a | grep file fs.file-max = 131072
NFILES is also set to 131072. Any ideas? -Andy > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of Michael S. Fischer > Sent: Thursday, February 28, 2008 3:51 PM > To: Andrew Knapp > Cc: [email protected] > Subject: Re: Child dying with "Too many open files" > > I can't help but wonder if you'd set it too high. What happens when > you set NFILES and fs.file-max both to 131072? I've tested that as a > known good value. > > --Michael > > On Thu, Feb 28, 2008 at 2:58 PM, Andrew Knapp <[EMAIL PROTECTED]> wrote: > > Yup, it is. Here's some output: > > > > $ ps auxwww | grep varnish > > root 12036 0.0 0.0 27704 648 ? Ss 14:54 0:00 > > /usr/sbin/varnishd -a :80 -f /etc/varnish/photo.vcl -T > <internalip>:6082 > > > > -t 120 -w 10,700,30 -s file,/c01/varnish/varnish_storage.bin,12G -u > > varnish -g varnish -P /var/run/varnish.pid > > varnish 12037 1.2 0.4 13119108 39936 ? Sl 14:54 0:00 > > /usr/sbin/varnishd -a :80 -f /etc/varnish/photo.vcl -T > <internalip>:6082 > > > > -t 120 -w 10,700,30 -s file,/c01/varnish/varnish_storage.bin,12G -u > > varnish -g varnish -P /var/run/varnish.pid > > > > -Andy > > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf > > > Of Michael S. Fischer > > > > > > > Sent: Thursday, February 28, 2008 1:57 PM > > > To: Andrew Knapp > > > Cc: [email protected] > > > Subject: Re: Child dying with "Too many open files" > > > > > > Is varnishd being started as root? (even if it drops privileges > > > later) Only root can have > 1024 file descriptors open, to my > > > knowledge. > > > > > > --Michael > > > > > > On Thu, Feb 28, 2008 at 11:48 AM, Andrew Knapp <[EMAIL PROTECTED]> > > > wrote: > > > > Didn't really get a answer to this, so I'm trying again. > > > > > > > > I've done some testing with the NFILES variable, and I keep > getting > > > the > > > > same error as before ("Too many open files"). I've also > verified > > > that > > > > the limit is actually being applied by putting a ulimit -a in > the > > > > /etc/init.d/varnish script. > > > > > > > > Anyone have any ideas? I'm running the 1.1.2-5 rpms from sf.net > on > > > > Centos 5.1. > > > > > > > > Thanks, > > > > Andy > > > > > > > > > > > > > -----Original Message----- > > > > > From: [EMAIL PROTECTED] > [mailto:varnish- > > > misc- > > > > > [EMAIL PROTECTED] On Behalf Of Andrew Knapp > > > > > > > > > Sent: Wednesday, February 20, 2008 5:52 PM > > > > > To: Michael S. Fischer > > > > > Cc: [email protected] > > > > > > > > > > > > > Subject: RE: Child dying with "Too many open files" > > > > > > > > > > Here's the output: > > > > > > > > > > $ sysctl fs.file-max > > > > > fs.file-max = 767606 > > > > > > > > > > > -----Original Message----- > > > > > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > > > > > Behalf > > > > > > Of Michael S. Fischer > > > > > > Sent: Wednesday, February 20, 2008 5:48 PM > > > > > > To: Andrew Knapp > > > > > > Cc: [email protected] > > > > > > Subject: Re: Child dying with "Too many open files" > > > > > > > > > > > > Does 'sysctl fs.file-max' say? It should be >= the ulimit. > > > > > > > > > > > > --Michael > > > > > > > > > > > > On Wed, Feb 20, 2008 at 4:04 PM, Andrew Knapp > > <[EMAIL PROTECTED]> > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hello, > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'm getting this error when running varnishd: > > > > > > > > > > > > > > > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > Child said (2, 15369): <<Assert error in wrk_thread(), > > > > cache_pool.c > > > > > > line > > > > > > > 217: > > > > > > > > > > > > > > Condition((pipe(w->pipe)) == 0) not true. > > > > > > > > > > > > > > errno = 24 (Too many open files) > > > > > > > > > > > > > > >> > > > > > > > > > > > > > > Cache child died pid=15369 status=0x6 > > > > > > > > > > > > > > > > > > > > > > > > > > > > uname -a: > > > > > > > > > > > > > > Linux <hostname> 2.6.18-53.1.4.el5 #1 SMP Fri Nov 30 > 00:45:55 > > > EST > > > > > > 2007 > > > > > > > x86_64 x86_64 x86_64 GNU/Linux > > > > > > > > > > > > > > > > > > > > > > > > > > > > command used to start varnish: > > > > > > > > > > > > > > /usr/sbin/varnishd -d -d -a :80 -f /etc/varnish/photo.vcl > -T > > > > > > > <internalIP>:6082 -t 120 -w 10,700,30 -s > > > > > > > file,/c01/varnish/varnish_storage.bin,12G -u varnish -g > > > varnish -P > > > > > > > /var/run/varnish.pid > > > > > > > > > > > > > > > > > > > > > > > > > > > > I have NFILES=270000 set in /etc/sysconfig/varnish. Do I > just > > > need > > > > > to > > > > > > up > > > > > > > that value? > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > Andy > > > > > > > _______________________________________________ > > > > > > > varnish-misc mailing list > > > > > > > [email protected] > > > > > > > http://projects.linpro.no/mailman/listinfo/varnish-misc > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > varnish-misc mailing list > > > > > [email protected] > > > > > http://projects.linpro.no/mailman/listinfo/varnish-misc > > > > _______________________________________________ > > > > varnish-misc mailing list > > > > [email protected] > > > > http://projects.linpro.no/mailman/listinfo/varnish-misc > > > > > > > > > > > > _______________________________________________ varnish-misc mailing list [email protected] http://projects.linpro.no/mailman/listinfo/varnish-misc
