Hi Rodney, I had a quick look, but am passing this one over to you as 'Move fixed distance' uses a MoveExecuter and I think the problem is tied up with the asynchronous movement.
The first 'Move fixed distance' after a manual move does not generate a Movement Trail point, subsequent 'Move fixed distance' commands do. If you then move the piece manually again, the next 'Move fixed distance' again does not generate a movement trail point. For Movement trail to work, Footprint needs setProperty(MOVED) called after it the piece has moved, I suspect it is being called before. Regards, Brent. skorpio2011 wrote: > When I use Move predefined distance, in my V Battlefleet Gothic > module, the movement trail appears only when I move a ship twice or > more. The first part of the trail is always invisible. However, there > is no problem when I move a ship by hand. > This error occurs since I updated Vassal from 2.0.5 to 2.4.2. > > Regards, > Skorpio > ------------------------ Yahoo! Groups Sponsor --------------------~--> Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/IMSolB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/vassalengine/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
