Thanks Brent.
Actually changing the location format property of the zone to include
$gridLocation$ took care of what I was wanting.
~Mark
Brent Easton wrote:
> Hi Mark,
>
> The primary purpose of a Zone in this situation is to create an area of the
> map where the primary Hex Grid does not apply. Is the name of your Zone
> 'Main'?
>
> If you want to create a 'transparent' zone that still uses the map grid, but
> the zone name can be referenced in property filters using $CurrentZone$, then
> in your Zone definition for Zone 'Main', click the 'Use boards Grid' setting
> on and change the 'Location Format' from $name$ to $gridLocation$ using the
> insert drop-down menu.
>
> The actual setting of the Grid Location format is in the 'Location Format'
> field in the Grid Numbering. Default is $gridLocation$, but can be changed to
> include the board name or anything else if required.
>
> Hope this helps,
>
> Regards,
> Brent.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/vassalengine/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
