On 05/24/2010 09:51 AM, Leonardo Carneiro - Veltrac wrote: > Leonardo Carneiro - Veltrac wrote: > >> erstazi wrote: >> >> >>> On 05/24/2010 09:00 AM, Leonardo Carneiro - Veltrac wrote: >>> >>> >>>> Hello again every one. I'm trying to setup a port forwarding with nat >>>> on vbox 3.2, but without any success. >>>> >>>> Here is what i have now: >>>> >>>> Host: Debian Lenny amd64, public IP at eth0. >>>> Guest: Windows Server 2K8 32bit running on vboxheadless 3.2 >>>> >>>> On the guest, i have two interfaces: one 'natted' behind eth0, and >>>> other in a host-only adapter. >>>> >>>> host:~# VBoxManage showvminfo SERVER | grep "NIC 1" >>>> NIC 1: MAC: 08002733ABA8, Attachment: NAT, Cable >>>> connected: on, Trace: off (file: none), Type: 82540EM, Reported >>>> speed: 0 Mbps, Boot priority: 0 >>>> NIC 1 Settings: MTU: 0, Socket( send: 64, receive: 64), TCP >>>> Window( send:64, receive: 64) >>>> NIC 1 Rule(0): name = sw, protocol = tcp, host ip = , host port >>>> = 4820, guest ip = , guest port = 4820 >>>> >>>> I did some tests. I tried to connect from my computer to the server >>>> in question. When tcpdumping on the eth0 of the host, i saw the >>>> requests coming, but none getting out. At the same time, Wireshark >>>> was active on the guest, and none of the request was fowarded to the >>>> guest. >>>> >>>> Here is the command line that i user to setup the portfowarding: >>>> VBoxManage modifyvm "SERVER" --natpf1 "sw,tcp,,4820,,4820" >>>> >>>> What i'm doing wrong? Tks in advance. >>>> -- >>>> Leonardo Carneiro >>>> >>>> >>>> >>> Hello Leonardo, >>> >>> Did you shut down the guest completely and then start the guest? >>> >>> >> The vbox process crashed once after i applied the rules. Did this count? >> > Updated the Guest additions (3.1.6 to 3.2) and restarted the system. > Port fowarding still not working =/ > Is port 4820 in use on the host (from a separate process of VirtualBox)? Is the service running on the guest?
In all technical purposes, what you specified should work without issues. I just tested it with: VBoxManage modifyvm "VMNAME --natpf1 "sw,tcp,,2222,,22" Basically SSH'ing into the guest. Worked without problems. ------------------------------------------------------------------------------ _______________________________________________ VBox-users-community mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/vbox-users-community
