Hi guys, here i'm again asking about Vbox and another type of guest.
At this time i installed a Windows 2003 Server 32bits on a Ubuntu Server
13.04 64Bits
Everything has working but i use a Gigalan NIC to get 1000mbps of speed.
The driver was installed successfully
without asking about drivers.
If i look at Network and see the speed of the NIC it show 1Gb. In the
network properties (advance config) there are only 5 choices about speed:
1. Auto
2. 10 half duplex
3. 10 full duplex
4. 100 half duplex
5. 100 full duplex
There is not a 1000 full duplex or 1000 half duplex.
When i copy and paste a file from my Host OS using samba i get only 9%
of the speed ( 90 mbps ).
I download a driver from www.intel.com and install it but i have the
same behaviour.
This is the output of *vboxmanage showvminfo "W2003"*
Name: W2003
Groups: /Nuevo grupo
Guest OS: Windows 2003
UUID: 19761bd7-61b0-48e1-8edf-eff71c08a51c
Config file:
/srv/vbox/VMs/W2003AguilaBackup19102013/W2003AguilaBackup19102013.vbox
Snapshot folder: /srv/vbox/VMs/W2003AguilaBackup19102013/Snapshots
Log folder: /srv/vbox/VMs/W2003AguilaBackup19102013/Logs
Hardware UUID: 19761bd7-61b0-48e1-8edf-eff71c08a51c
Memory size: 1024MB
Page Fusion: on
VRAM size: 128MB
CPU exec cap: 100%
HPET: on
Chipset: piix3
Firmware: BIOS
Number of CPUs: 4
Synthetic Cpu: off
CPUID overrides: None
Boot menu mode: message and menu
Boot Device (1): DVD
Boot Device (2): HardDisk
Boot Device (3): Not Assigned
Boot Device (4): Not Assigned
ACPI: on
IOAPIC: on
PAE: on
Time offset: 0ms
RTC: local time
Hardw. virt.ext: on
Hardw. virt.ext exclusive: on
Nested Paging: on
Large Pages: on
VT-x VPID: on
State: running (since 2013-10-24T20:52:37.522000000)
Monitor count: 1
3D Acceleration: off
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: off
Allow Tracing to Access VM: off
Tracing Configuration:
Autostart Enabled: off
Autostart Delay: 0
Storage Controller Name (0): IDE Controller
Storage Controller Type (0): PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 2
Storage Controller Port Count (0): 2
Storage Controller Bootable (0): on
IDE Controller (0, 0):
/srv/vbox/VMs/W2003AguilaBackup19102013/W2003AguilaBackup19102013-disk1.vdi
(UUID: 2854929a-5f9c-45e9-
9994-2518a3536d94)
IDE Controller (1, 0): Empty
NIC 1: MAC: 0800271323FE, Attachment: NAT, Cable connected:
on, Trace: off (file: none), Type: 82540EM, Reported sp
eed: 0 Mbps, Boot priority: 0, Promisc Policy: allow-all, Bandwidth
group: none
NIC 1 Settings: MTU: 0, Socket (send: 64, receive: 64), TCP Window
(send:64, receive: 64)
NIC 2: MAC: 0800278A1111, Attachment: Bridged Interface 'em1',
Cable connected: on, Trace: off (file: none), Type:
Am79C973, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy:
deny, Bandwidth group: none
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: PS/2 Mouse
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
LPT 1: disabled
LPT 2: disabled
Audio: disabled
Clipboard Mode: disabled
Drag'n'drop Mode: disabled
Video mode: 1024x768x32
VRDE: enabled (Address 0.0.0.0, Ports 57800, MultiConn: on,
ReuseSingleConn: off, Authentication type: null)
VRDE port: 57800
Video redirection: disabled
VRDE property: TCP/Ports = "57800"
VRDE property: TCP/Address = <not set>
VRDE property: VideoChannel/Enabled = <not set>
VRDE property: VideoChannel/Quality = <not set>
VRDE property: VideoChannel/DownscaleProtection = <not set>
VRDE property: Client/DisableDisplay = <not set>
VRDE property: Client/DisableInput = <not set>
VRDE property: Client/DisableAudio = <not set>
VRDE property: Client/DisableUSB = <not set>
VRDE property: Client/DisableClipboard = <not set>
VRDE property: Client/DisableUpstreamAudio = <not set>
VRDE property: Client/DisableRDPDR = <not set>
VRDE property: H3DRedirect/Enabled = <not set>
VRDE property: Security/Method = <not set>
VRDE property: Security/ServerCertificate = <not set>
VRDE property: Security/ServerPrivateKey = <not set>
VRDE property: Security/CACertificate = <not set>
VRDE property: Audio/RateCorrectionMode = <not set>
USB: disabled
EHCI: enabled
USB Device Filters:
<none>
Available remote USB devices:
<none>
Currently Attached USB Devices:
<none>
Bandwidth groups: <none>
Shared folders: <none>
VRDE Connection: not active
Clients so far: 0
Guest:
Configured memory balloon size: 0 MB
OS type: Windows2003
Additions run level: 0
Guest Facilities:
No active facilities.
Thanks for your time!
Emiliano
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk
_______________________________________________
VBox-users-community mailing list
VBox-users-community@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/vbox-users-community
_______________________________________________
Unsubscribe:
mailto:vbox-users-community-requ...@lists.sourceforge.net?subject=unsubscribe
