Hi,
I am new to VirtualBox. I am running VirtualBox on Debian SID (Version
1.6.2_OSE). I installed Windows XP as a guest operating system. Everything
works fine except the network, which does not work at all.
I have a DSL connection using PPPoE. The output of ifconfig is:
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:00:cb:68:4e:7f
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:21858 errors:0 dropped:0 overruns:0 frame:0
TX packets:19967 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:23630921 (22.5 MiB) TX bytes:3034009 (2.8 MiB)
Interrupt:21 Base address:0x800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3310 errors:0 dropped:0 overruns:0 frame:0
TX packets:3310 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:514317 (502.2 KiB) TX bytes:514317 (502.2 KiB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:88.217.44.165 P-t-P:82.135.16.28 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:21710 errors:0 dropped:0 overruns:0 frame:0
TX packets:19820 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:23144339 (22.0 MiB) TX bytes:2589078 (2.4 MiB)
I am running pdns as a local dns server. /etc/resolv.conf contains:
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.0.1
In Windows XP I see a LAN-Connection: an AMD PCNET Family Ethernet-Adapter,
which obtains IP address and DNS server automatically. The output of ipconfig
is (translated from German):
IP-Address: 10.0.2.15
Subnet: 255.255.255.0
Standard gateway: 10.0.2.2
When I try to ping e.g. 88.217.44.165 or 82.135.16.28 all packets are lost.
Here are some (hopefully relevant) parts of the VirtualBox log:
00:00:08.773 [/Devices/pcnet/] (level 2)
00:00:08.773
00:00:08.773 [/Devices/pcnet/0/] (level 3)
00:00:08.773 Trusted <integer> = 0x0000000000000001 (1)
00:00:08.773 PCIDeviceNo <integer> = 0x0000000000000003 (3)
00:00:08.773 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:08.773
00:00:08.773 [/Devices/pcnet/0/Config/] (level 4)
00:00:08.773 Am79C973 <integer> = 0x0000000000000001 (1)
00:00:08.773 MAC <bytes> = "08 00 27 a6 5f 13" (cb=6)
00:00:08.773 CableConnected <integer> = 0x0000000000000001 (1)
00:00:08.773 LineSpeed <integer> = 0x0000000000000000 (0)
00:00:08.773
00:00:08.773 [/Devices/pcnet/0/LUN#999/] (level 4)
00:00:08.773 Driver <string> = "MainStatus" (cch=11)
00:00:08.773
00:00:08.773 [/Devices/pcnet/0/LUN#999/Config/] (level 5)
00:00:08.773 papLeds <integer> = 0x000000000a315f50 (171007824)
00:00:08.773
00:00:08.773 [/Devices/pcnet/0/LUN#0/] (level 4)
00:00:08.773 Driver <string> = "NAT" (cch=4)
00:00:08.773
00:00:08.773 [/Devices/pcnet/0/LUN#0/Config/] (level 5)
00:00:08.773 TFTPPrefix <string> = "/home/michi/.VirtualBox/TFTP" (cch=29)
00:00:08.773 BootFile <string> = "Windows XP.pxe" (cch=15)
...
00:10:05.724 PCNet#0: Init: ss32=1 GCRDRA=0x06582420[64] GCTDRA=0x06582020[64]
00:14:31.077 PCNet#0: Init: ss32=1 GCRDRA=0x06582420[64] GCTDRA=0x06582020[64]
00:14:31.495 NAT: DHCP offered IP address 10.0.2.15
00:14:31.511 NAT: DHCP offered IP address 10.0.2.15
00:14:31.558 PCNet#0: Init: ss32=1 GCRDRA=0x06582420[64] GCTDRA=0x06582020[64]
00:14:32.383 PCNet#0: Init: ss32=1 GCRDRA=0x06582420[64] GCTDRA=0x06582020[64]
00:14:32.384 PCNet#0: Init: ss32=1 GCRDRA=0x06582420[64] GCTDRA=0x06582020[64]
00:14:32.384 PCNet#0: Init: ss32=1 GCRDRA=0x06582420[64] GCTDRA=0x06582020[64]
00:14:32.449 PCNet#0: Init: ss32=1 GCRDRA=0x06582420[64] GCTDRA=0x06582020[64]
00:14:32.507 NAT: DHCP offered IP address 10.0.2.15
00:14:32.509 NAT: DHCP offered IP address 10.0.2.15
00:14:32.565 PCNet#0: Init: ss32=1 GCRDRA=0x06582420[64] GCTDRA=0x06582020[64]
00:23:46.343 NAT: DNS address: 127.0.0.1
..
00:28:47.312 PCNet#0: Init: ss32=1 GCRDRA=0x0673b420[64] GCTDRA=0x0673b020[64]
00:28:48.020 PCNet#0: Init: ss32=1 GCRDRA=0x0673b420[64] GCTDRA=0x0673b020[64]
...
00:29:12.730 PCNet#0: Init: ss32=1 GCRDRA=0x0673b420[64] GCTDRA=0x0673b020[64]
00:29:13.556 PCNet#0: Init: ss32=1 GCRDRA=0x0673b420[64] GCTDRA=0x0673b020[64]
...
00:30:34.947 PCNet#0: Init: ss32=1 GCRDRA=0x0673b420[64] GCTDRA=0x0673b020[64]
...
00:39:43.693 PCNet#0: Init: ss32=1 GCRDRA=0x066db420[64] GCTDRA=0x066db020[64]
00:39:43.706 Guest adapter information contains unsupported type 5. The block
has been skipped.
...
00:39:43.693 PCNet#0: Init: ss32=1 GCRDRA=0x066db420[64] GCTDRA=0x066db020[64]
00:39:43.706 Guest adapter information contains unsupported type 5. The block
has been skipped.
...
00:39:48.398 NAT: DHCP offered IP address 10.0.2.15
00:39:48.434 PCNet#0: Init: ss32=1 GCRDRA=0x066db420[64] GCTDRA=0x066db020[64]
00:39:51.836 PCNet#0: Init: ss32=1 GCRDRA=0x066db420[64] GCTDRA=0x066db020[64]
00:39:56.423 Guest Additions capability report: (0x5) seamless: yes,
hostWindowMapping: no, graphics: yes
00:40:07.998 PCNet#0: Init: ss32=1 GCRDRA=0x066db420[64] GCTDRA=0x066db020[64]
(I searched for net and copied the output containing net)
Do you have any tips how to get the network working?
Thanks,
Michael
P.S. I cannot register for the formum because my mailserver uses Graylisting
and apparently the Forum only sends mails once, instead of trying it again
after failing to deliver an email.
_______________________________________________
vbox-users mailing list
vbox-users@virtualbox.org
http://vbox.innotek.de/mailman/listinfo/vbox-users
