Hi,

I get this message on a CentOS 5.2 i386 guest running stock
2.6.18-92.1.22.el5 kernel, Guest Additions installed and running:

BUG: soft lockup - CPU#0 stuck for 10s! [swapper:0]

Pid: 0, comm:              swapper
EIP: 0060:[<c0609c6d>] CPU: 0
EIP is at _spin_lock_bh+0x16/0x18
 EFLAGS: 00000246    Tainted: G       (2.6.18-92.1.22.el5 #1)
EAX: c072c000 EBX: f7d01a1c ECX: c1807c00 EDX: c072c000
ESI: 00000000 EDI: 00002687 EBP: 00009a1c DS: 007b ES: 007b
CR0: 8005003b CR2: c180b040 CR3: 36ae8000 CR4: 000006d0
 [<c05c5a9a>] rt_run_flush+0x47/0x8f
 [<c05c7cce>] rt_secret_rebuild+0x0/0x21
 [<c05c7cdc>] rt_secret_rebuild+0xe/0x21
 [<c042dbcf>] run_timer_softirq+0xfb/0x151
 [<c042a712>] __do_softirq+0x5a/0xbb
 [<c0407461>] do_softirq+0x52/0x9d
 [<c04059bf>] apic_timer_interrupt+0x1f/0x24
 [<c0403ccf>] mwait_idle+0x25/0x38
 [<c0403c90>] cpu_idle+0x9f/0xb9
 [<c06ed9ee>] start_kernel+0x379/0x380
 =======================

Host is running Solaris 10 10/08 s10x_u6wos_07b X86, Pentium 4 3.4 GHz
CPU, VirtualBox 2.1.2.

$ VBoxManage showvminfo centos
VirtualBox Command Line Management Interface Version 2.1.2
(C) 2005-2009 Sun Microsystems, Inc.
All rights reserved.

Name:            centos
Guest OS:        Red Hat
UUID:            9c1d5b4d-bd5c-4136-9539-44aeb6dbe888
Config file:     /home/cbredi/.VirtualBox/Machines/centos/centos.xml
Memory size:     1024MB
VRAM size:       8MB
Boot menu mode:  message and menu
ACPI:            on
IOAPIC:          off
PAE:             off
Time offset:     0 ms
Hardw. virt.ext: off
Nested Paging:   off
VT-x VPID:       off
State:           running (since 2009-02-03T05:14:43.543000000)
Monitor count:   1
3D Acceleration: off
Floppy:          empty
SATA:            disabled
IDE Controller:  PIIX4
Primary master:  /home/cbredi/.VirtualBox/HardDisks/centos.vdi (UUID:
0281768c-bef8-43d1-a015-1c63774e002f)
Primary slave:   /home/cbredi/.VirtualBox/HardDisks/centos_opt.vdi
(UUID: 68479cdc-c56f-48fb-9281-59c9de9626a4)
DVD:             empty
NIC 1:           MAC: 080027861889, Attachment: Host Interface 'bge4000
- Broadcom BCM57xx Gigabit Ethernet', Cable connected: on, Trace: off
(file: none), Type: 82540EM, Reported speed: 0 Mbps
NIC 2:           disabled
NIC 3:           disabled
NIC 4:           disabled
NIC 5:           disabled
NIC 6:           disabled
NIC 7:           disabled
NIC 8:           disabled
UART 1:          disabled
UART 2:          disabled
Audio:           disabled (Driver: Unknown, Controller: Unknown)
Clipboard Mode:  Bidirectional
Video mode:      720x400x0
VRDP:            enabled (Address 172.20.40.3, Port 3391, MultiConn:
off, ReuseSingleConn: off, Authentication type: null)
Shared folders:  <none>

Thanks,
Cristian

_______________________________________________
vbox-users mailing list
[email protected]
http://vbox.innotek.de/mailman/listinfo/vbox-users

Reply via email to