if you are using NAT networking in VirtualBox, this should "just work" - at least, it does for me. -- Robin
On Wed, 25 Feb 2009 20:15:40 +0800 Umarzuki Mochlis <[email protected]> wrote: > Can it be done from vbox's gui? How? > > My interfaces > ------------------- > debian:~# ifconfig > eth0 Link encap:Ethernet HWaddr 00:1e:ec:b1:5a:76 > UP BROADCAST MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:395551294978 overruns:0 > frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > Interrupt:251 Base address:0x2000 > > eth1 Link encap:Ethernet HWaddr 00:21:00:68:1d:b4 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:4 > TX packets:0 errors:2 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > Interrupt:18 > > eth0:avahi Link encap:Ethernet HWaddr 00:1e:ec:b1:5a:76 > inet addr:169.254.7.192 Bcast:169.254.255.255 > Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 > Interrupt:251 Base address:0x2000 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:85798 errors:0 dropped:0 overruns:0 frame:0 > TX packets:85798 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:22436965 (21.3 MiB) TX bytes:22436965 (21.3 MiB) > > ppp0 Link encap:Point-to-Point Protocol > inet addr:10.21.3.151 P-t-P:10.64.64.64 > Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST > MTU:1500 Metric:1 RX packets:203468 errors:113 dropped:0 overruns:0 > frame:0 TX packets:211749 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:3 > RX bytes:147894577 (141.0 MiB) TX bytes:37310918 (35.5 MiB) > _______________________________________________ vbox-users mailing list [email protected] http://vbox.innotek.de/mailman/listinfo/vbox-users
