Hi folks,
Probably there's a mistake.

SITUATION
---------
Domain1.dom is an internal domain, IP: no server LAN
Domain2.dom is an internal domain, IP: same LAN as server
Domain3.dom is an external domain
Domain4.dom is another external domain

My tcp.smtp:
# No Qmail-Scanner at all for mail from 127.0.0.1
127.:allow,RELAYCLIENT="",RBLSMTPD="",QMAILQUEUE="/var/qmail/bin/qmail-queue
"
# Use Qmail-Scanner without SpamAssassin on any mail from the LAN
192.168.:allow,RELAYCLIENT="",RBLSMTPD="",TCPREMOTEIP="Protected",QMAILQUEUE
="/var/qmail/bin/qmail-queue"
# Use Qmail-Scanner with SpamAssassin on any mail from the rest of the world
:allow,DENYMAIL="DNSCHECK",QMAILQUEUE="/var/qmail/bin/qmail-scanner-queue.pl
"

TESTS
-----
With --enable-roaming-users=n:

Domain1.dom --> domain3.dom NO (right, 553 not allowed rcphost)
Domain2.dom --> domain3.dom YES (right, for tcp.smtp)
Domain3.dom --> domain4.dom NO (right, isn't an open relay)

With --enable-roaming-users=y:

Domain2.dom --> domain3.dom YES (right, for tcp.smtp)
Domain3.dom --> domain4.dom NO (right, isn't an open relay)
The problem is:
Domain1.dom --> domain3.dom NO (553 not allowed rcphost) why?

In /home/vpopmail/bin I've tcp.smtp, but open-smtp too.
In open-smtp I can see one entry:
192.168.10.13:allow,RELAYCLIENT="",RBLSMTPD=""  1072273753
(ip from LAN)
In open-smtp we have the communications permitted from tcp.smtp?
Where's the db that I could clean with the command
/home/vpopmail/bin/clearopensmtp?

I don't understand exactly the mechanism of --enable-roaming-users, could
you figure it out?
Where's probably my mistake?

Thanks for patience and support
Regards
Andrea

Reply via email to