Manage Images --> Edit Image Profiles --> Edit --> expand Advanced Options
Compare the minimum RAM, number of processors, etc for the image to the settings for your VMs: Manage Computers --> select your computer groups --> Edit Computer Information (check all the boxes)
There must be a computer with hardware >= the image requirements. You can adjust either the computer specs or image requirements if necessary.
I don't think the issue is with the VM host state. Hope this helps, Andy Jeffrey Wisman wrote:
Andy, The VM computers are all in the "available" state. However the VM host is also in the "available" state. I'm guessing that could be the problem? When I try to change the state by using "Change state of selected computers to: vmhostinuse", it gives me the OK but it seems to stay in the "available" state. I'm not sure its doing anything. Also, the management node is in the "available" state, so that's all good. The image I'm trying to use is in "allImages" and "allVMimages" groups. Those two groups are mapped to all computer groups except for "all vm host computers". Privileges should be fine as I'm using the admin user to test and have granted all permissions to the admin user. Let me know if you have insight on the VM host available issue. Otherwise we'll chat more tomorrow. Many thanks for your help!! Jeff On Mon, Feb 1, 2010 at 7:38 AM, Andy Kurth <andy_ku...@ncsu.edu> wrote:Hi Jeff, This problem is somewhat difficult to troubleshoot because there are several possible causes. The easy things to check: -Are your VM computers in the available state (Manage Computers --> Computer Utilities)?. They may have been left in the failed state when you were having imaging trouble. Your VM host should be in the 'vmhostinuse' state. -Make sure your management node is in the available state (Management Nodes --> Edit Management Node Information). Nothing should have changed the state of the managment node but this is easy to forget about. If everything is available, check the image/computer groupings and mappings and privilege tree: 1. Manage Images --> Edit Image Grouping -- note the image groups the image is assigned to 2. Manage Image --> Edit Image Mapping -- determine which computer groups the image is mapped to by viewing the mappings for the image groups you located in step 1 3. Manage Computers --> Edit Computer Grouping -- make sure your VM computers are in a computer group found in step 2 3. View the privilege tree (Privileges). Is there a node where the image group, computer group, and either the user account or a group the user account is in are all configured. The user account or group needs the "imageCheckOut" right and the image and computer groups need to be "available". Some database troubleshooting is necessary if you're still having trouble. It may be easiest if there's a way to take a look at your database. Regards, Andy Jeffrey Wisman wrote:So I'm still having issues. I can perform all the actions listed here successfully (at least it seems so from the logs): http://cwiki.apache.org/VCL/create-a-windows-base-image.html I'm trying to create a reservation for the first time from the GUI, and having trouble. I get the message "Selection not currently available" when I try to do it, and I can't figure out why. The groupings, mappings, and permissions *seem* right, but maybe they aren't. Attached are some screen shots. Let me know if I'm missing something obvious, or need to provide more information for troubleshooting. Thanks, Jeff On Wed, Jan 27, 2010 at 9:51 AM, Jeffrey Wisman < jeff.wis...@csueastbay.edu <mailto:jeff.wis...@csueastbay.edu>> wrote: I just wanted to post a follow up that the issue was with the hosts file. I had put both the public and private IP addresses in the management server's host file. I removed the public IP and now it works just fine. I'm still having issues with the reservations, but I think its just my misunderstanding of how this is all supposed to work. I'll be spending more time in the next few days, and post if I can't figure out the next steps on my own. Thanks, Jeff -----Original Message----- From: Jeffrey Wisman [mailto:jeff.wis...@csueastbay.edu <mailto:jeff.wis...@csueastbay.edu>] Sent: Mon 1/25/2010 12:58 PM To: vcl-dev@incubator.apache.org <mailto:vcl-dev@incubator.apache.org>; vcl-dev@incubator.apache.org <mailto:vcl-dev@incubator.apache.org> Subject: RE: Issues with Inserting Image Reservation Into VCL DB Thanks Andy, I'll try your suggestions tonight and report back. Your help is much appreciated! Jeff -----Original Message----- From: Andy Kurth [mailto:andy_ku...@ncsu.edu <mailto:andy_ku...@ncsu.edu>] Sent: Mon 1/25/2010 12:33 PM To: vcl-dev@incubator.apache.org <mailto:vcl-dev@incubator.apache.org> Subject: Re: Issues with Inserting Image Reservation Into VCL DB Hello Jeff, It appears that the image was successfully captured and it's at the point where it's trying to reload the new image. Is the computer.privateIPaddress value set in the database? If not, set this for vcl-winxp in the computer table and see if the warnings go away. You can also add an entry in the /etc/hosts file on the management node for the private address of vcl-winxp. Either of these should clear up most of the warning messages you're seeing. You don't have to go through the entire imaging process again to troubleshoot this. You can restart the reload process by: -Kill the existing vcld process for the reservation if it's still running. The PID to kill is displayed as the leftmost field in the log output (1297 in the output you included). Don't kill the main vcld process. -Set request.state to 'reload', request.start to NOW(), and request.end to some time in the future. The vcld process should begin to process it again. Start 'tail -f /var/log/vcld.log' before changing the request state. Is it hanging indefinitely after it attempts to run the last command (route delete 0.0.0.0) included in the log output? I haven't seen this problem before if it is indeed hanging. The 'route delete' command may be breaking networking on the computer and tripping up the SSH command. I would try running the SSH command manually with the -v option to try to figure out what's happening: ssh -v -i /etc/vcl/vcl.key -l root -p 22 -x vcl-winxp 'route delete 0.0.0.0' If this command hangs, try adding the ServerAliveInterval SSH option: ssh -v -o ServerAliveInterval=15 -i /etc/vcl/vcl.key -l root -p 22 -x vcl-winxp 'route delete 0.0.0.0' Give this command at least 20 seconds before killing it if it hangs. If this prevents it from hanging, try manually running the next command VCL would have performed: ssh -i /etc/vcl/vcl.key -l root -p 22 -x vcl-winxp 'route -p ADD 0.0.0.0 MASK 0.0.0.0 134.154.193.190 METRIC 1' The output of these commands may be helpful in troubleshooting. Regards, Andy Kurth / NCSU VCL Jeffrey Wisman wrote: > Hi all - Just joined this list. I've been working on a pilot VCL install at > CSU East Bay, and am hung up on what seems like nearly the last step. I'm > following instructions at the bottom of this page: > http://cwiki.apache.org/confluence/display/VCL/Create+a+Windows+Base+Image > > I'm attempting to insert the image reservation into the VCL DB, and it only > gets as far as this network/route issue. Is this a DHCP problem? A hosts > file issue? Something else? Please let me know if anyone has seen this > before, or can help troubleshoot. Here is the last part of the output from > tail -f /var/log/vcld.log > > > |1297|11:34|reload| ---- WARNING ---- > |1297|11:34|reload| 2010-01-23 > 00:33:30|1297|11:34|reload|Windows.pm:firewall_enable_ssh_private(4197)|SSH > will not be disabled on public interface because public interface name could > not be determined > |1297|11:34|reload| ( 0) utils.pm <http://utils.pm>, notify (line: 728) > |1297|11:34|reload| (-1) Windows.pm, firewall_enable_ssh_private (line: 4197) > |1297|11:34|reload| (-2) Windows.pm, post_load (line: 485) > |1297|11:34|reload| (-3) new.pm <http://new.pm>, reload_image (line: 692) > |1297|11:34|reload| (-4) new.pm <http://new.pm>, process (line: 266) > |1297|11:34|reload| (-5) vcld, make_new_child (line: 594) > |1297|11:34|reload| (-6) vcld, main (line: 341) > > 2010-01-23 > 00:33:30|1297|11:34|reload|Windows.pm:get_network_configuration(4630)|network > configuration has already been retrieved > 2010-01-23 > 00:33:30|1297|11:34|reload|DataStructure.pm:get_computer_private_ip_address(1 > 442)|attempting to retrieve private IP address for computer: vcl-winxp > 2010-01-23 > 00:33:30|1297|11:34|reload|DataStructure.pm:get_computer_private_ip_address(1 > 446)|retrieved contents of /etc/hosts on this management node, contains 6 > lines > > |1297|11:34|reload| ---- WARNING ---- > |1297|11:34|reload| 2010-01-23 > 00:33:30|1297|11:34|reload|DataStructure.pm:get_computer_private_ip_address(1 > 466)|did not find any lines in /etc/hosts containing 'vcl-winxp' > |1297|11:34|reload| ( 0) utils.pm <http://utils.pm>, notify (line: 728) > |1297|11:34|reload| (-1) DataStructure.pm, get_computer_private_ip_address > (line: 1466) > |1297|11:34|reload| (-2) Windows.pm, get_network_configuration (line: 4642) > |1297|11:34|reload| (-3) Windows.pm, get_private_interface_name (line: 4761) > |1297|11:34|reload| (-4) Windows.pm, firewall_enable_ssh_private (line: 4202) > |1297|11:34|reload| (-5) Windows.pm, post_load (line: 485) > |1297|11:34|reload| (-6) new.pm <http://new.pm>, reload_image (line: 692) > > 2010-01-23 > 00:33:30|1297|11:34|reload|Windows.pm:get_network_configuration(4644)|unable > to retrieve computer private IP address from reservation data > > |1297|11:34|reload| ---- WARNING ---- > |1297|11:34|reload| 2010-01-23 > 00:33:30|1297|11:34|reload|Windows.pm:get_private_interface_name(4763)|unable > to retrieve network configuration > |1297|11:34|reload| ( 0) utils.pm <http://utils.pm>, notify (line: 728) > |1297|11:34|reload| (-1) Windows.pm, get_private_interface_name (line: 4763) > |1297|11:34|reload| (-2) Windows.pm, firewall_enable_ssh_private (line: 4202) > |1297|11:34|reload| (-3) Windows.pm, post_load (line: 485) > |1297|11:34|reload| (-4) new.pm <http://new.pm>, reload_image (line: 692) > |1297|11:34|reload| (-5) new.pm <http://new.pm>, process (line: 266) > |1297|11:34|reload| (-6) vcld, make_new_child (line: 594) > > > |1297|11:34|reload| ---- WARNING ---- > |1297|11:34|reload| 2010-01-23 > 00:33:30|1297|11:34|reload|Windows.pm:firewall_enable_ssh_private(4220)|priva > te interface name could not be determined, SSH will be enabled for all > profiles > |1297|11:34|reload| ( 0) utils.pm <http://utils.pm>, notify (line: 728) > |1297|11:34|reload| (-1) Windows.pm, firewall_enable_ssh_private (line: 4220) > |1297|11:34|reload| (-2) Windows.pm, post_load (line: 485) > |1297|11:34|reload| (-3) new.pm <http://new.pm>, reload_image (line: 692) > |1297|11:34|reload| (-4) new.pm <http://new.pm>, process (line: 266) > |1297|11:34|reload| (-5) vcld, make_new_child (line: 594) > |1297|11:34|reload| (-6) vcld, main (line: 341) > > 2010-01-23 > 00:33:30|1297|11:34|reload|utils.pm:run_ssh_command(6168)|executing SSH > command on vcl-winxp: > |1297|11:34|reload| /usr/bin/ssh -i /etc/vcl/vcl.key -l root -p 22 -x > vcl-winxp 'netsh.exe firewall set portopening name = "Cygwin SSHD" protocol = > TCP port = 22 profile = ALL' 2>&1 > 2010-01-23 00:33:35|1226|vcld:main(165)|lastcheckin time updated for > management node 1: 2010-01-23 00:33:35 > 2010-01-23 > 00:33:37|1297|11:34|reload|utils.pm: run_ssh_command(6250)|run_ssh_command > output: > |1297|11:34|reload| Ok. > 2010-01-23 00:33:37|1297|11:34|reload|utils.pm:run_ssh_command(6264)|SSH > command executed on vcl-winxp, returning (0, "Ok.") > 2010-01-23 > 00:33:37|1297|11:34|reload|Windows.pm:firewall_enable_ssh_private(4232)|confi > gured firewall to allow SSH on private interface > 2010-01-23 > 00:33:37|1297|11:34|reload|Windows.pm:get_network_configuration(4630)|network > configuration has already been retrieved > 2010-01-23 > 00:33:37|1297|11:34|reload|DataStructure.pm:get_computer_private_ip_address(1 > 442)|attempting to retrieve private IP address for computer: vcl-winxp > 2010-01-23 > 00:33:37|1297|11:34|reload|DataStructure.pm:get_computer_private_ip_address(1 > 446)|retrieved contents of /etc/hosts on this management node, contains 6 > lines > > |1297|11:34|reload| ---- WARNING ---- > |1297|11:34|reload| 2010-01-23 > 00:33:37|1297|11:34|reload|DataStructure.pm:get_computer_private_ip_address(1 > 466)|did not find any lines in /etc/hosts containing 'vcl-winxp' > |1297|11:34|reload| ( 0) utils.pm <http://utils.pm>, notify (line: 728) > |1297|11:34|reload| (-1) DataStructure.pm, get_computer_private_ip_address > (line: 1466) > |1297|11:34|reload| (-2) Windows.pm, get_network_configuration (line: 4642) > |1297|11:34|reload| (-3) Windows.pm, get_public_interface_name (line: 4791) > |1297|11:34|reload| (-4) Windows.pm, firewall_enable_ping_private (line: > 3935) > |1297|11:34|reload| (-5) Windows.pm, post_load (line: 496) > |1297|11:34|reload| (-6) new.pm <http://new.pm>, reload_image (line: 692) > > 2010-01-23 > 00:33:37|1297|11:34|reload|Windows.pm:get_network_configuration(4644)|unable > to retrieve computer private IP address from reservation data > > |1297|11:34|reload| ---- WARNING ---- > |1297|11:34|reload| 2010-01-23 > 00:33:37|1297|11:34|reload|Windows.pm:get_public_interface_name(4793)|unable > to retrieve network configuration > |1297|11:34|reload| ( 0) utils.pm <http://utils.pm>, notify (line: 728) > |1297|11:34|reload| (-1) Windows.pm, get_public_interface_name (line: 4793) > |1297|11:34|reload| (-2) Windows.pm, firewall_enable_ping_private (line: > 3935) > |1297|11:34|reload| (-3) Windows.pm, post_load (line: 496) > |1297|11:34|reload| (-4) new.pm <http://new.pm>, reload_image (line: 692) > |1297|11:34|reload| (-5) new.pm <http://new.pm>, process (line: 266) > |1297|11:34|reload| (-6) vcld, make_new_child (line: 594) > > > |1297|11:34|reload| ---- WARNING ---- > |1297|11:34|reload| 2010-01-23 > 00:33:37|1297|11:34|reload|Windows.pm:firewall_enable_ping_private(3946)|ping > will not be disabled on public interface because public interface name could > not be determined > |1297|11:34|reload| ( 0) utils.pm <http://utils.pm>, notify (line: 728) > |1297|11:34|reload| (-1) Windows.pm, firewall_enable_ping_private (line: > 3946) > |1297|11:34|reload| (-2) Windows.pm, post_load (line: 496) > |1297|11:34|reload| (-3) new.pm <http://new.pm>, reload_image (line: 692) > |1297|11:34|reload| (-4) new.pm <http://new.pm>, process (line: 266) > |1297|11:34|reload| (-5) vcld, make_new_child (line: 594) > |1297|11:34|reload| (-6) vcld, main (line: 341) > > 2010-01-23 > 00:33:37|1297|11:34|reload|Windows.pm:get_network_configuration(4630)|network > configuration has already been retrieved > 2010-01-23 > 00:33:37|1297|11:34|reload|DataStructure.pm:get_computer_private_ip_address(1 > 442)|attempting to retrieve private IP address for computer: vcl-winxp > 2010-01-23 >00:33:37|1297|11:34|reload|DataStructure.pm:get_computer_private_ip_address(1 > 446)|retrieved contents of /etc/hosts on this management node, contains 6 > lines > > |1297|11:34|reload| ---- WARNING ---- > |1297|11:34|reload| 2010-01-23 > 00:33:37|1297|11:34|reload|DataStructure.pm:get_computer_private_ip_address(1 > 466)|did not find any lines in /etc/hosts containing 'vcl-winxp' > |1297|11:34|reload| ( 0) utils.pm <http://utils.pm>, notify (line: 728) > |1297|11:34|reload| (-1) DataStructure.pm, get_computer_private_ip_address > (line: 1466) > |1297|11:34|reload| (-2) Windows.pm, get_network_configuration (line: 4642) > |1297|11:34|reload| (-3) Windows.pm, get_private_interface_name (line: 4761) > |1297|11:34|reload| (-4) Windows.pm, firewall_enable_ping_private (line: > 3951) > |1297|11:34|reload| (-5) Windows.pm, post_load (line: 496) > |1297|11:34|reload| (-6) new.pm <http://new.pm>, reload_image (line: 692) > > 2010-01-23 > 00:33:37|1297|11:34|reload|Windows.pm:get_network_configuration(4644)|unable > to retrieve computer private IP address from reservation data > > |1297|11:34|reload| ---- WARNING ---- > |1297|11:34|reload| 2010-01-23 > 00:33:37|1297|11:34|reload|Windows.pm:get_private_interface_name(4763)|unable > to retrieve network configuration > |1297|11:34|reload| ( 0) utils.pm <http://utils.pm>, notify (line: 728) > |1297|11:34|reload| (-1) Windows.pm, get_private_interface_name (line: 4763) > |1297|11:34|reload| (-2) Windows.pm, firewall_enable_ping_private (line: > 3951) > |1297|11:34|reload| (-3) Windows.pm, post_load (line: 496) > |1297|11:34|reload| (-4) new.pm <http://new.pm>, reload_image (line: 692) > |1297|11:34|reload| (-5) new.pm <http://new.pm>, process (line: 266) > |1297|11:34|reload| (-6) vcld, make_new_child (line: 594) > > > |1297|11:34|reload| ---- WARNING ---- > |1297|11:34|reload| 2010-01-23 > 00:33:37|1297|11:34|reload|Windows.pm:firewall_enable_ping_private(3967)|priv > ate interface name could not be determined, ping will be enabled for all > profiles > |1297|11:34|reload| ( 0) utils.pm <http://utils.pm>, notify (line: 728) > |1297|11:34|reload| (-1) Windows.pm, firewall_enable_ping_private (line: > 3967) > |1297|11:34|reload| (-2) Windows.pm, post_load (line: 496) > |1297|11:34|reload| (-3) new.pm <http://new.pm>, reload_image (line: 692) > |1297|11:34|reload| (-4) new.pm <http://new.pm>, process (line: 266) > |1297|11:34|reload| (-5) vcld, make_new_child (line: 594) > |1297|11:34|reload| (-6) vcld, main (line: 341) > > 2010-01-23 > 00:33:37|1297|11:34|reload|utils.pm:run_ssh_command(6168)|executing SSH > command on vcl-winxp: > |1297|11:34|reload| /usr/bin/ssh -i /etc/vcl/vcl.key -l root -p 22 -x > vcl-winxp 'netsh.exe firewall set icmpsetting type = 8 mode = ENABLE profile > = ALL ;' 2>&1 > 2010-01-23 00:33:40|1226|vcld:main(165)|lastcheckin time updated for > management node 1: 2010-01-23 00:33:40 > 2010-01-23 > 00:33:43|1297|11:34|reload|utils.pm: run_ssh_command(6250)|run_ssh_command > output: > |1297|11:34|reload| Ok. > 2010-01-23 00:33:43|1297|11:34|reload|utils.pm:run_ssh_command(6264)|SSH > command executed on vcl-winxp, returning (0, "Ok.") > 2010-01-23 > 00:33:43|1297|11:34|reload|Windows.pm:firewall_enable_ping_private(3979)|conf > igured firewall to allow ping on private interface > 2010-01-23 > 00:33:43|1297|11:34|reload|Windows.pm:get_public_default_gateway(4890)|IP > configuration mode in use: dynamicDHCP > 2010-01-23 > 00:33:43|1297|11:34|reload|Windows.pm:get_network_configuration(4630)|network > configuration has already been retrieved > 2010-01-23 > 00:33:43|1297|11:34|reload|DataStructure.pm:get_computer_private_ip_address(1 > 442)|attempting to retrieve private IP address for computer: vcl-winxp > 2010-01-23 > 00:33:43|1297|11:34|reload|DataStructure.pm:get_computer_private_ip_address(1 > 446)|retrieved contents of /etc/hosts on this management node, contains 6 > lines > > |1297|11:34|reload| ---- WARNING ---- > |1297|11:34|reload| 2010-01-23 > 00:33:43|1297|11:34|reload|DataStructure.pm:get_computer_private_ip_address(1 > 466)|did not find any lines in /etc/hosts containing 'vcl-winxp' > |1297|11:34|reload| ( 0) utils.pm <http://utils.pm>, notify (line: 728) > |1297|11:34|reload| (-1) DataStructure.pm, get_computer_private_ip_address > (line: 1466) > |1297|11:34|reload| (-2) Windows.pm, get_network_configuration (line: 4642) > |1297|11:34|reload| (-3) Windows.pm, get_public_default_gateway (line: 4894) > |1297|11:34|reload| (-4) Windows.pm, set_public_default_route (line: 7429) > |1297|11:34|reload| (-5) Windows.pm, post_load (line: 507) > |1297|11:34|reload| (-6) new.pm <http://new.pm>, reload_image (line: 692) > > 2010-01-23 > 00:33:43|1297|11:34|reload|Windows.pm:get_network_configuration(4644)|unable > to retrieve computer private IP address from reservation data > > |1297|11:34|reload| ---- WARNING ---- > |1297|11:34|reload| 2010-01-23 > 00:33:43|1297|11:34|reload|Windows.pm:get_public_default_gateway(4908)|unable > to retrieve public network configuration currently in use on vcl-winxp > |1297|11:34|reload| ( 0) utils.pm <http://utils.pm>, notify (line: 728) > |1297|11:34|reload| (-1) Windows.pm, get_public_default_gateway (line: 4908) > |1297|11:34|reload| (-2) Windows.pm, set_public_default_route (line: 7429) > |1297|11:34|reload| (-3) Windows.pm, post_load (line: 507) > |1297|11:34|reload| (-4) new.pm <http://new.pm>, reload_image (line: 692) > |1297|11:34|reload| (-5) new.pm <http://new.pm>, process (line: 266) > |1297|11:34|reload| (-6) vcld, make_new_child (line: 594) > > 2010-01-23 > 00:33:43|1297|11:34|reload|DataStructure.pm:get_management_node_public_defaul > t_gateway(1783)|returning default gateway from route command: 134.154.193.190 > 2010-01-23 > 00:33:43|1297|11:34|reload|Windows.pm:get_public_default_gateway(4917)|return > ing management node's default gateway address: 134.154.193.190 > 2010-01-23 > 00:33:43|1297|11:34|reload|utils.pm:run_ssh_command(6168)|executing SSH > command on vcl-winxp: > |1297|11:34|reload| /usr/bin/ssh -i /etc/vcl/vcl.key -l root -p 22 -x > vcl-winxp 'route delete 0.0.0.0' 2>&1 > 2010-01-23 00:33:45|1226|vcld:main(165)|lastcheckin time updated for > management node 1: 2010-01-23 00:33:45 > 2010-01-23 00:33:50|1226|vcld:main(165)|lastcheckin time updated for > management node 1: 2010-01-23 00:33:50 > 2010-01-23 00:33:55|1226|vcld:main(165)|lastcheckin time updated for > management node 1: 2010-01-23 00:33:55 > 2010-01-23 00:34:00|1226|vcld:main(165)|lastcheckin time updated for > management node 1: 2010-01-23 00:34:00 > 2010-01-23 00:34:05|1226|vcld:main(165)|lastcheckin time updated for > management node 1: 2010-01-23 00:34:05 > 2010-01-23 00:34:10|1226|vcld:main(165)|lastcheckin time updated for > management node 1: 2010-01-23 00:34:10 > > > > > > > And the database state: > > mysql> select * from request; > +----+---------+--------+-------------+-------+------------+------+---------+ > ---------------------+---------------------+---------------------+----------- > ---+ > | id | stateid | userid | laststateid | logid | forimaging | test | preload | > start | end | daterequested | > datemodified | > +----+---------+--------+-------------+-------+------------+------+---------+ > ---------------------+---------------------+---------------------+----------- > ---+ > | 11 | 14 | 2 | 19 | 0 | 0 | 0 | 0 | > 2010-01-23 00:31:59 | 2010-01-23 01:01:59 | 2010-01-23 00:31:59 | NULL > | > +----+---------+--------+-------------+-------+------------+------+---------+ > ---------------------+---------------------+---------------------+----------- > ---+ > 1 row in set (0.00 sec) > > mysql> select * from reservation; > +----+-----------+------------+---------+-----------------+------------------ > +----------+---------------------+------+ > | id | requestid | computerid | imageid | imagerevisionid | managementnodeid > | remoteIP | lastcheck | pw | > +----+-----------+------------+---------+-----------------+------------------ > +----------+---------------------+------+ > | 34 | 11 | 13 | 10 | 10 | 1 > | NULL | 0000-00-00 00:00:00 | NULL | > +----+-----------+------------+---------+-----------------+------------------ > +----------+---------------------+------+ > 1 row in set (0.00 sec) > > > And finally, here is the directory structure (after executing the commands) > of the VMWare server: > /vmfs/volumes/4ae7602f-490f0fcb-52ef-00144fd1e4ed # ls -l > drwxr-xr-x 1 root root 420 Jan 23 08:31 golden > drwxr-xr-x 1 root root 420 Jan 23 08:31 inuse > drwxr-xr-x 1 root root 4340 Dec 3 18:30 > vcl.csueastbay.edu <http://vcl.csueastbay.edu> > drwxr-xr-x 1 root root 4340 Dec 3 18:08 > vcldb.csueastbay.edu <http://vcldb.csueastbay.edu> > drwxr-xr-x 1 root root 4340 Dec 3 18:23 > vclmgmt.csueastbay.edu <http://vclmgmt.csueastbay.edu> > drwxr-xr-x 1 root root 2660 Jan 23 08:22 > vmwarewinxp-base7-v0 > /vmfs/volumes/4ae7602f-490f0fcb-52ef-00144fd1e4ed # cd golden/ > /vmfs/volumes/4ae7602f-490f0fcb-52ef-00144fd1e4ed/golden # ls -l > drwxr-xr-x 1 root root 280 Jan 23 08:31 > vmwarewinxp-base7-v0 > /vmfs/volumes/4ae7602f-490f0fcb-52ef-00144fd1e4ed/golden # cd .. > /vmfs/volumes/4ae7602f-490f0fcb-52ef-00144fd1e4ed # cd inuse/ > /vmfs/volumes/4ae7602f-490f0fcb-52ef-00144fd1e4ed/inuse # ls -l > drwxr-xr-x 1 root root 420 Jan 23 08:31 vcl-winxp > > > Let me know if more output from the logs would be helpful, or any other > information. > > > Thanks, > Jeff Wisman > -- Andy Kurth Virtual Computing Lab Office of Information Technology North Carolina State University andy_ku...@ncsu.edu <mailto:andy_ku...@ncsu.edu> 919.513.4090-- Andy Kurth Virtual Computing Lab Office of Information Technology North Carolina State University andy_ku...@ncsu.edu 919.513.4090
-- Andy Kurth Virtual Computing Lab Office of Information Technology North Carolina State University andy_ku...@ncsu.edu 919.513.4090
