xCAT root path is /opt/xcat according to the vcld log but the images are actuially store in /opt/x86
Roger Herling Sr. Desktop Administrator Marist College PH: 845-575-3347 From: Andy Kurth <andy_ku...@ncsu.edu> To: vcl-dev@incubator.apache.org Date: 05/11/2010 10:49 AM Subject: Re: Change image timeout I believe the problem is related to the Install Path setting for your management node: Management Nodes > Edit Management Node Information > Edit Based on the paths being used, I'm guessing yours is set to 'storage/x86'. Where does the partimage .gz file reside? If it actually resides in '/storage/image/x86' then change the Install Path setting to 'storage'. The .tmpl file residing in this directory may indicate another problem with the xCAT root path. Where is xCAT installed and which version of xCAT are you using? Search your log file for 'xCAT root path found:'. What path does this line contain? Regards, Andy Roger Herling wrote: > [r...@vcl ~]# du -c /storage/x86/image/x86/winvista-Windows7FacStaff49-v0* > 4 /storage/x86/image/x86/winvista-Windows7FacStaff49-v0.tmpl > 4 total > > [r...@vcl ~]# ls -l /storage/x86/image/x86/winvista-Windows7FacStaff49-v0* > -rw-r--r-- 1 root root 352 May 10 12:09 > /storage/x86/image/x86/winvista-Windows7FacStaff49-v0.tmpl > > > Roger Herling > Sr. Desktop Administrator > Marist College > PH: 845-575-3347 > > > > From: > Andy Kurth <andy_ku...@ncsu.edu> > To: > vcl-dev@incubator.apache.org > Date: > 05/11/2010 09:06 AM > Subject: > Re: Change image timeout > > > > The command that is being executed to check the size should be: > du -c /storage/x86/image/x86/winvista-Windows7FacStaff49-v0* > > Try running this. What output does it generate? The last line should > look like: > xxxx total > > The code appears to be finding the 'total' line but is either not parsing > it > correctly, not calculating the size correctly, or the du command isn't > correct. > > Also, it would be helpful if you include the output from: > ls -l /storage/x86/image/x86/winvista-Windows7FacStaff49-v0* > > -Andy > > > Waldron, Michael H wrote: >> So you never answered whether you watched the capture occurring from the > node console. Can you watch the console and see the capture running while > monitoring the log that shows the capture file is size 0? >> What about any other error messages for the rest of the log capture for > this imaging request? >> >> Mike Waldron >> Systems Specialist >> ITS Research Computing >> University of North Carolina at Chapel Hill >> CB #3420, ITS Manning, Rm 2509 >> 919-962-9778 >> >> >> -----Original Message----- >> From: Roger Herling [mailto:roger.herl...@marist.edu] >> Sent: Monday, May 10, 2010 4:18 PM >> To: vcl-dev@incubator.apache.org >> Subject: RE: Change image timeout >> >> yup >> Roger Herling >> Sr. Desktop Administrator >> Marist College >> PH: 845-575-3347 >> >> >> >> From: >> "Waldron, Michael H" <mwald...@email.unc.edu> >> To: >> "'vcl-dev@incubator.apache.org'" <vcl-dev@incubator.apache.org> >> Date: >> 05/10/2010 04:17 PM >> Subject: >> RE: Change image timeout >> >> >> >> So you can do an "ls -l >> /storage/x86/image/x86/winvista-Windows7FacStaff49-v0" and it shows some > >> size? >> >> >> >> Mike Waldron >> Systems Specialist >> ITS Research Computing >> University of North Carolina at Chapel Hill >> CB #3420, ITS Manning, Rm 2509 >> 919-962-9778 >> >> >> -----Original Message----- >> From: Roger Herling [mailto:roger.herl...@marist.edu] >> Sent: Monday, May 10, 2010 4:03 PM >> To: vcl-dev@incubator.apache.org >> Subject: RE: Change image timeout >> >> The image is definately being captured and I can force the image to be >> used after it fails by manually undeleting it from the mysql database >> Roger Herling >> Sr. Desktop Administrator >> Marist College >> PH: 845-575-3347 >> >> >> >> From: >> "Waldron, Michael H" <mwald...@email.unc.edu> >> To: >> "'vcl-dev@incubator.apache.org'" <vcl-dev@incubator.apache.org> >> Date: >> 05/10/2010 04:01 PM >> Subject: >> RE: Change image timeout >> >> >> >> From these lines in the log, it's indicating that the capture hasn't >> started: >> >> 12:31:01|9225|144:178|image|xCAT.pm:get_image_size(3146)|returning image > >> size: 0 MB (4 bytes) >> 2010-05-10 > 12:31:01|9225|144:178|image|xCAT.pm:capture_monitor(1258)|image >> >> size is the same: 0=0, copy may be complete >> 2010-05-10 > 12:31:01|9225|144:178|image|xCAT.pm:capture_monitor(1238)|image >> >> copy not complete, sleeping for 30 seconds >> >> Notice the image size is 0 MB, meaning the partimage save isn't > occurring. >> After 20 minutes of nothing being saved, it gives up. Can you watch the >> capture from the server console to verify that the PXE boot is running > and >> that it's booting into the image capture mode? Do the log entries at the > >> beginning of the imaging process show any errors? >> >> >> Mike Waldron >> Systems Specialist >> ITS Research Computing >> University of North Carolina at Chapel Hill >> CB #3420, ITS Manning, Rm 2509 >> 919-962-9778 >> >> >> -----Original Message----- >> From: Roger Herling [mailto:roger.herl...@marist.edu] >> Sent: Monday, May 10, 2010 3:25 PM >> To: vcl-dev@incubator.apache.org >> Subject: RE: Change image timeout >> >> 010-05-10 >> > 12:31:01|9225|144:178|image|xCAT.pm:_get_image_repository_path(3271)|returning > >> >> repository path for vcl.is.marist.edu: /storage/x86/image/x86 >> 2010-05-10 >> 12:31:01|9225|144:178|image|xCAT.pm:get_image_size(3146)|returning image > >> size: 0 MB (4 bytes) >> 2010-05-10 > 12:31:01|9225|144:178|image|xCAT.pm:capture_monitor(1258)|image >> >> size is the same: 0=0, copy may be complete >> 2010-05-10 > 12:31:01|9225|144:178|image|xCAT.pm:capture_monitor(1238)|image >> >> copy not complete, sleeping for 30 seconds >> 2010-05-10 >> 12:31:01|9225|144:178|image|xCAT.pm:capture_monitor(1239)|attempt 38/40: > >> image copy not complete, sleeping for 30 seconds >> 2010-05-10 12:31:06|7448|vcld:main(165)|lastcheckin time updated for >> management node 1: 2010-05-10 12:31:06 >> 2010-05-10 12:31:11|7448|vcld:main(165)|lastcheckin time updated for >> management node 1: 2010-05-10 12:31:11 >> 2010-05-10 12:31:16|7448|vcld:main(165)|lastcheckin time updated for >> management node 1: 2010-05-10 12:31:16 >> 2010-05-10 12:31:21|7448|vcld:main(165)|lastcheckin time updated for >> management node 1: 2010-05-10 12:31:21 >> 2010-05-10 12:31:26|7448|vcld:main(165)|lastcheckin time updated for >> management node 1: 2010-05-10 12:31:26 >> 2010-05-10 12:31:31|7448|vcld:main(165)|lastcheckin time updated for >> management node 1: 2010-05-10 12:31:31 >> 2010-05-10 > 12:31:32|9225|144:178|image|xCAT.pm:_nodeset_option(1697)|node4 >> >> in image image-x86-winvista-Windows7FacStaff49-v0-all state >> 2010-05-10 >> 12:31:32|9225|144:178|image|xCAT.pm:capture_monitor(1246)|nodeset status > >> for node4: image image-x86-winvista-Windows7FacStaff49-v0-all >> 2010-05-10 >> 12:31:32|9225|144:178|image|xCAT.pm:capture_monitor(1254)|checking size > of >> >> winvista-Windows7FacStaff49-v0 >> 2010-05-10 >> 12:31:32|9225|144:178|image|xCAT.pm:get_image_size(3109)|getting size of > >> image: winvista-Windows7FacStaff49-v0 >> 2010-05-10 >> > 12:31:32|9225|144:178|image|xCAT.pm:_get_image_repository_path(3175)|management > >> >> node identifier argument was not specified >> 2010-05-10 >> > 12:31:32|9225|144:178|image|xCAT.pm:_get_image_repository_path(3197)|attempting > >> >> to determine repository path for image on vcl.is.marist.edu: >> |9225|144:178|image| image id: 49 >> |9225|144:178|image| OS name: winvista >> |9225|144:178|image| OS type: windows >> |9225|144:178|image| OS install type: partimage >> |9225|144:178|image| OS source path: image >> |9225|144:178|image| architecture: x86 >> 2010-05-10 >> > 12:31:32|9225|144:178|image|xCAT.pm:_get_image_repository_path(3271)|returning > >> >> repository path for vcl.is.marist.edu: /storage/x86/image/x86 >> 2010-05-10 >> 12:31:32|9225|144:178|image|xCAT.pm:get_image_size(3146)|returning image > >> size: 0 MB (4 bytes) >> 2010-05-10 > 12:31:32|9225|144:178|image|xCAT.pm:capture_monitor(1258)|image >> >> size is the same: 0=0, copy may be complete >> 2010-05-10 > 12:31:32|9225|144:178|image|xCAT.pm:capture_monitor(1238)|image >> >> copy not complete, sleeping for 30 seconds >> 2010-05-10 >> 12:31:32|9225|144:178|image|xCAT.pm:capture_monitor(1239)|attempt 39/40: > >> image copy not complete, sleeping for 30 seconds >> 2010-05-10 12:31:36|7448|vcld:main(165)|lastcheckin time updated for >> management node 1: 2010-05-10 12:31:36 >> 2010-05-10 12:31:41|7448|vcld:main(165)|lastcheckin time updated for >> management node 1: 2010-05-10 12:31:41 >> 2010-05-10 12:31:46|7448|vcld:main(165)|lastcheckin time updated for >> management node 1: 2010-05-10 12:31:46 >> 2010-05-10 12:31:51|7448|vcld:main(165)|lastcheckin time updated for >> management node 1: 2010-05-10 12:31:51 >> 2010-05-10 12:31:56|7448|vcld:main(165)|lastcheckin time updated for >> management node 1: 2010-05-10 12:31:56 >> 2010-05-10 12:32:01|7448|vcld:main(165)|lastcheckin time updated for >> management node 1: 2010-05-10 12:32:01 >> 2010-05-10 > 12:32:02|9225|144:178|image|xCAT.pm:_nodeset_option(1697)|node4 >> >> in image image-x86-winvista-Windows7FacStaff49-v0-all state >> 2010-05-10 >> 12:32:02|9225|144:178|image|xCAT.pm:capture_monitor(1246)|nodeset status > >> for node4: image image-x86-winvista-Windows7FacStaff49-v0-all >> 2010-05-10 >> 12:32:02|9225|144:178|image|xCAT.pm:capture_monitor(1254)|checking size > of >> >> winvista-Windows7FacStaff49-v0 >> 2010-05-10 >> 12:32:02|9225|144:178|image|xCAT.pm:get_image_size(3109)|getting size of > >> image: winvista-Windows7FacStaff49-v0 >> 2010-05-10 >> > 12:32:02|9225|144:178|image|xCAT.pm:_get_image_repository_path(3175)|management > >> >> node identifier argument was not specified >> 2010-05-10 >> > 12:32:02|9225|144:178|image|xCAT.pm:_get_image_repository_path(3197)|attempting > >> >> to determine repository path for image on vcl.is.marist.edu: >> |9225|144:178|image| image id: 49 >> |9225|144:178|image| OS name: winvista >> |9225|144:178|image| OS type: windows >> |9225|144:178|image| OS install type: partimage >> |9225|144:178|image| OS source path: image >> |9225|144:178|image| architecture: x86 >> 2010-05-10 >> > 12:32:02|9225|144:178|image|xCAT.pm:_get_image_repository_path(3271)|returning > >> >> repository path for vcl.is.marist.edu: /storage/x86/image/x86 >> 2010-05-10 >> 12:32:02|9225|144:178|image|xCAT.pm:get_image_size(3146)|returning image > >> size: 0 MB (4 bytes) >> 2010-05-10 > 12:32:02|9225|144:178|image|xCAT.pm:capture_monitor(1258)|image >> >> size is the same: 0=0, copy may be complete >> >> |9225|144:178|image| ---- WARNING ---- >> |9225|144:178|image| 2010-05-10 >> 12:32:02|9225|144:178|image|xCAT.pm:capture_monitor(1278)|image copy > timed >> >> out, waited 20 minutes, nodeset status for node4 never changed to boot: >> image image-x86-winvista-Windows7FacStaff49-v0-all >> |9225|144:178|image| ( 0) utils.pm, notify (line: 737) >> |9225|144:178|image| (-1) xCAT.pm, capture_monitor (line: 1278) >> |9225|144:178|image| (-2) xCAT.pm, capture (line: 1183) >> |9225|144:178|image| (-3) image.pm, process (line: 162) >> |9225|144:178|image| (-4) vcld, make_new_child (line: 594) >> |9225|144:178|image| (-5) vcld, main (line: 341) >> >> >> |9225|144:178|image| ---- WARNING ---- >> |9225|144:178|image| 2010-05-10 >> 12:32:02|9225|144:178|image|xCAT.pm:capture(1187)|problem occurred while > >> monitoring image capture >> |9225|144:178|image| ( 0) utils.pm, notify (line: 737) >> |9225|144:178|image| (-1) xCAT.pm, capture (line: 1187) >> |9225|144:178|image| (-2) image.pm, process (line: 162) >> |9225|144:178|image| (-3) vcld, make_new_child (line: 594) >> |9225|144:178|image| (-4) vcld, main (line: 341) >> >> >> |9225|144:178|image| ---- WARNING ---- >> |9225|144:178|image| 2010-05-10 >> > 12:32:02|9225|144:178|image|image.pm:process(166)|winvista-Windows7FacStaff49-v0 > >> >> image failed to be captured by provisioning module >> |9225|144:178|image| ( 0) utils.pm, notify (line: 737) >> |9225|144:178|image| (-1) image.pm, process (line: 166) >> |9225|144:178|image| (-2) vcld, make_new_child (line: 594) >> |9225|144:178|image| (-3) vcld, main (line: 341) >> >> 2010-05-10 12:32:04|9225|144:178|image|utils.pm:mail(1348)|SUCCESS -- >> Sending mail To: , PROBLEM -- image.pm >> >> |9225|144:178|image| ---- CRITICAL ---- >> |9225|144:178|image| 2010-05-10 >> > 12:32:02|9225|144:178|image|image.pm:reservation_failed(390)|winvista-Windows7FacStaff49-v0 > >> >> image creation failed >> |9225|144:178|image| ( 0) utils.pm, notify (line: 737) >> |9225|144:178|image| (-1) image.pm, reservation_failed (line: 390) >> |9225|144:178|image| (-2) image.pm, process (line: 167) >> |9225|144:178|image| (-3) vcld, make_new_child (line: 594) >> |9225|144:178|image| (-4) vcld, main (line: 341) >> >> 2010-05-10 12:32:04|9225|144:178|image|utils.pm:mail(1348)|SUCCESS -- >> Sending mail To: r...@localhost, VCL -- NOTICE DELAY Image Creation >> Windows7FacStaff >> 2010-05-10 12:32:05|9225|144:178|image|utils.pm:mail(1348)|SUCCESS -- >> Sending mail To: , VCL -- NOTICE FAILED Image Creation Windows7FacStaff >> 2010-05-10 >> 12:32:05|9225|144:178|image|utils.pm:update_request_state(2186)|request >> 144 state updated to: maintenance, laststate to: image >> 2010-05-10 >> 12:32:05|9225|144:178|image|image.pm:reservation_failed(442)|request > state >> >> set to maintenance, laststate to image >> 2010-05-10 >> > 12:32:05|9225|144:178|image|utils.pm:update_computer_state(2228)|computer >> 6 state updated to: maintenance >> 2010-05-10 >> 12:32:05|9225|144:178|image|image.pm:reservation_failed(450)|node4 state > >> set to maintenance >> 2010-05-10 >> 12:32:05|9225|144:178|image|image.pm:reservation_failed(457)|exiting >> 2010-05-10 12:32:05|9225|144:178|image|State.pm:DESTROY(905)|destructor >> called, ref($self)=VCL::image >> 2010-05-10 >> > 12:32:05|9225|144:178|image|utils.pm:delete_computerloadlog_reservation(7551)|removing > >> >> computerloadlog entries matching loadstate = begin >> 2010-05-10 >> > 12:32:05|9225|144:178|image|utils.pm:delete_computerloadlog_reservation(7598)|deleted > >> >> rows from computerloadlog for reservation id=178 >> 2010-05-10 12:32:05|9225|144:178|image|State.pm:DESTROY(912)|removed >> computerloadlog rows with loadstate=begin for reservation >> 2010-05-10 12:32:05|9225|144:178|image|State.pm:DESTROY(924)|number of >> database handles state process created: 1 >> 2010-05-10 12:32:05|9225|144:178|image|State.pm:DESTROY(933)|process has > a >> >> database handle stored in $ENV{dbh}, attempting disconnect >> 2010-05-10 12:32:05|9225|144:178|image|State.pm:DESTROY(935)|$ENV{dbh}: >> database disconnect successful >> 2010-05-10 12:32:05|9225|144:178|image|State.pm:DESTROY(949)|VCL::image >> process 9225 exiting >> 2010-05-10 12:32:05|7448|vcld:REAPER(744)|VCL process exited for >> reservation 178 >> Roger Herling >> Sr. Desktop Administrator >> Marist College >> PH: 845-575-3347 >> >> >> >> From: >> "Waldron, Michael H" <mwald...@email.unc.edu> >> To: >> "'vcl-dev@incubator.apache.org'" <vcl-dev@incubator.apache.org> >> Date: >> 05/10/2010 02:50 PM >> Subject: >> RE: Change image timeout >> >> >> >> Roger, >> >> By image uploads do you mean capturing a new image? From what I've >> observed with ours, as long as the image file size is increasing on the >> management node, it assumes the capture is still proceeding and > continues >> to check. >> >> Do you have vcld.log output you can provide from when the problem > occurs? >> >> Mike Waldron >> Systems Specialist >> ITS Research Computing >> University of North Carolina at Chapel Hill >> CB #3420, ITS Manning, Rm 2509 >> 919-962-9778 >> >> >> -----Original Message----- >> From: Roger Herling [mailto:roger.herl...@marist.edu] >> Sent: Monday, May 10, 2010 11:28 AM >> To: vcl-dev@incubator.apache.org >> Subject: Change image timeout >> >> Where do I need to make changes to scripts to increase the image capture > >> wait time restore time etc.. I am having issues with image uploads > taking >> longer than allowed to upload. >> >> >> >> Roger Herling >> Sr. Desktop Administrator >> Marist College >> PH: 845-575-3347 >> >> >> > -- Andy Kurth Virtual Computing Lab Office of Information Technology North Carolina State University andy_ku...@ncsu.edu 919.513.4090
