Thank you for the detailed instruction, I gave it a try to setup
xCAT2.5/imaging by following
I cannot find partimage-ng anywhere, so I have partimage-0.6.9 compiled
and installed, but it doesn't seem working. I got:
[root@blade14 ~]# nodeset blade08 image
blade08: Error: Unable to identify plugin for this command, check relevant
I have to handcraft several xcat tables, among them nodetype and osimage
are the ones I have little confidence. Could you dump some relevant
records in those two tables to illustrate your setup? also, do I need to
change anything to switch from partimage-ng to partimage?
From: Josh Thompson <josh_thomp...@ncsu.edu>
Date: 03/22/2011 12:15 PM
Subject: Re: VCL2.2 + xCAT2.5 on bladecenter
-----BEGIN PGP SIGNED MESSAGE-----
The stateless parts are not actually black boxes. They are gziped cpio
and are typical linux initrd and root filesystem images. You can do the
following to extract them:
zcat ../initrd.img | cpio --extract
zcat ../rootimg.gz | cpio --extract # if you do this last command as a
root user, you will get one error about not being able to create dev/null
which is okay to ignore unless you want to modify and recreate the image
You would actually need to go through this process if you have hardware
is not supported in these images. I only had the hardware at NCSU to
on; so, they don't have a very big range of hardware support. If you
to go ahead with using this stuff for partimage and need support for
hardware, I can guide you through adding it in to initrd and rootimg.
If you wanted to modify and recreate the images after doing the above, you
would do the following:
find . | cpio -oc | gzip -c -9 > ../initrd-new.img
find . | cpio -oc | gzip -c -9 > ../rootimg-new.gz
The two images really don't do much. Most of the work is done by the
partimageng postscript. They really just provide a small install of linux
which the other stuff can run.
As long as NCSU is using bare metal images, we'll still need a way to use
and partimage to deploy images, and I don't see us moving completely away
bare metal images for many years.
I have been told that more recent versions of xCAT 2 do have partimage
support, but that you have to download that part separately. I have not
looked in to this, but if it would be easy to switch VCL over to using
it's possible we may do so in the future.
On Tuesday March 22, 2011, John Ma wrote:
> My concerns to the pre-build images are
> 1. Security - It's a black box. Will need our security officer's
> approval for production use.
> 2. Support - Will it still be available when we need to expand to
> hardware platform or next release of xCAT/partimage?
> John Ma
> Marist College
> From: Aaron Peeler <aaron_pee...@ncsu.edu>
> To: firstname.lastname@example.org
> Date: 03/22/2011 10:32 AM
> Subject: Re: VCL2.2 + xCAT2.5 on bladecenter
> We like partimage-ng.
> But, we still use both partimage and partimage-ng. Our case is a little
> unique, we started using xCAT1.3 with partimage, then added local
> support ourselves because xcat 2.0 did not include imaging.
> Can you expand on what you feel uncomfortable about? Is it building them
> or modifying, you should be able to mount them and view the contents.
> On 3/21/11 1:53 PM, John Ma wrote:
> > Hi Aaron,
> > I couldn't even finish configuring xCAT2.5 to capture image. What
> > imaging module is in your setup, partimage, partimage-ng, systemimager
> > or other? I have this resource
> to-xcat-2x-unofficial.html ,
> > but feel uncomfortable with the three pre-build stateless images.
> > Thanks,
> > John Ma
> > Marist College
> > From: Aaron Peeler <aaron_pee...@ncsu.edu>
> > To: email@example.com
> > Date: 03/21/2011 12:33 PM
> > Subject: Re: VCL2.2 + xCAT2.5 on bladecenter
> > Hello John,
> > Yes. We're using xcat 2.5.1 and older versions
> > Can you send your vcld.log file for the requestid it failed on?
> > Aaron
> > On 3/21/11 12:25 PM, John Ma wrote:
> > > Hi community,
> > >
> > > I attempted and failed to setup xCAT 2.5 to work with VCL2.2 for
> > > metal provisioning all within a bladecenter. Does anyone have a
> > > story on this kind of setup yet?
> > >
> > > Thanks,
> > > John Ma
> > > Marist College
> > --
> > Aaron Peeler
> > Program Manager
> > Virtual Computing Lab
> > NC State University
North Carolina State University
my GPG/PGP key can be found at pgp.mit.edu
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.16 (GNU/Linux)
-----END PGP SIGNATURE-----