Thanks for all of you for your help. Yes, Greg is right that my networks
were switched. It works now after I switch them back.

Many many thanks,
Lei

On 9/23/11 12:32 PM, "Alexander Patterson"
<alexander.patter...@csueastbay.edu> wrote:

>I am posting this on behalf of Greg Duhon
>
>I have one more suggestion to add.  Verify that the networks are not
>switched.  In other words, is the public network on the private
>interface or private network on the public interface.  I can't tell
>you how many times this one dinged us when we first started using VCL.
>
>-Greg Duhon
>
>On Fri, Sep 23, 2011 at 9:32 AM, James O'Dell <jod...@fullerton.edu>
>wrote:
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> If you can't ping your gateway, it's either a network problem,
>> or a firewall problem.
>>
>> Try pinging the gateway, and then dumping your arp table
>> ('arp -an'). If you see the mac address for the gateway in
>> your arp table, it's probably a firewall issue. If the
>> mac address isn't there, it's a network problem
>>
>> __Jim
>>
>>
>> On 9/23/2011 9:27 AM, Huang,Lei wrote:
>>> Hi Alex,
>>>
>>> Thanks for your suggestions! For the image, it works fine when it
>>> lauches on virtual hosts on existing nodes. The problem happens
>>> when it runs on a new node. I assume the sshd works fine on the
>>> image itself.
>>>
>>> I have set up the ssh key to allow the management node to log in
>>> the node successfully. After I log into the new node running
>>> VMware, I can see that my network eth0 and eth1 have private and
>>> public ip address. However, I found that I cann't ping my gateway
>>> from the node. Are there any settings I need to do?
>>>
>>> Thanks, Lei
>>>
>>> ________________________________________ From: Alexander Patterson
>>> [alexander.patter...@csueastbay.edu] Sent: Friday, September 23,
>>> 2011 11:08 AM To: vcl-user@incubator.apache.org Cc:
>>> aaron_pee...@ncsu.edu Subject: Re: How to configure a new computing
>>> node?
>>>
>>> Hello,
>>>
>>> Did you check su - Log in as root for the image you are working on
>>> Password: Turn on sshd by typing /etc/init.d/sshd start Got to the
>>> /etc/init.d/ then type chkconfig sshd on
>>>
>>> Have you made sure that you can ssh -i /etc/vcl/vcl.key <hostname
>>> or IP address> ?
>>>
>>> I had this issue with ssh not kicking off before as well and it was
>>> a issue with the image itself.
>>>
>>> Another helpfull command to check would be ssh -vv (IP address)
>>>
>>> Have you logged into your box running VMware to see if you are
>>> getting a public and private ip address?
>>>
>>> On Fri, Sep 23, 2011 at 9:00 AM, Huang,Lei <lhu...@pvamu.edu>
>>> wrote:
>>>> Sorry for asking again. I suspect that the problem may be related
>>>> to network setting. I don't understand why ssd on VM was not
>>>> active. Is it possible that the IP address of VM is not correct?
>>>> Any suggestions/hints would be very much appreciated!
>>>>
>>>> Thanks, Lei ________________________________________ From:
>>>> Huang,Lei [lhu...@pvamu.edu] Sent: Thursday, September 22, 2011
>>>> 10:36 AM To: vcl-user@incubator.apache.org;
>>>> aaron_pee...@ncsu.edu Subject: Re: How to configure a new
>>>> computing node?
>>>>
>>>> Aaron,
>>>>
>>>> Thank you for your reply. I copied some log information as
>>>> follows. It looks like the VM was started, but sshd on the VM was
>>>> not active. The script looped and waited for half an hour and
>>>> failed at the end. The image works fine on existing blades. I
>>>> wonder if there is some configuration of VM server I didn't set
>>>> correctly for the new node.
>>>>
>>>> Thanks, Lei
>>>>
>>>> ===================
>>>>
>>>> 2011-09-21
>>>> 23:31:27|14402|518:512|new|utils.pm:run_ssh_command(6180)|executing
>>>> SSH command on CSB308: |14402|518:512|new| /usr/bin/ssh -i
>>>> /etc/vcl/vcl.key  -l root -p 22 -x CSB308 'vmware-cmd
>>>>
>>>>/install/vmware_files/runningvms/CentOS5_5-base10-v0vmguest-10/CentOS5_
>>>>5-ba
>>>>
>>>>
>> se10-v0vmguest-10.vmx start' 2>&1
>>>> 2011-09-21 23:31:31|3929|vcld:main(165)|lastcheckin time updated
>>>> for management node 1: 2011-09-21 23:31:31 2011-09-21
>>>> 23:31:36|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-21 23:31:36 2011-09-21
>>>> 23:31:40|14122|517:511|inuse|utils.pm:check_connection(1765)|checking
>>>> for connection by admin on vmguest-2, attempt 27 2011-09-21
>>>> 23:31:40|14122|517:511|inuse|utils.pm:run_ssh_command(6180)|executing
>>>> SSH command on vmguest-2: |14122|517:511|inuse| /usr/bin/ssh -i
>>>> /etc/vcl/vcl.key  -l root -p 22 -x vmguest-2 'netstat -an' 2>&1
>>>> 2011-09-21
>>>> 23:31:40|14122|517:511|inuse|utils.pm:run_ssh_command(6180)|executing
>>>> SSH command on vmguest-2: |14122|517:511|inuse| /usr/bin/ssh -i
>>>> /etc/vcl/vcl.key  -l root -p 22 -x vmguest-2 'who' 2>&1
>>>> 2011-09-21
>>>>
>>>>23:31:41|14122|517:511|inuse|utils.pm:run_ssh_command(6262)|run_ssh_com
>>>>mand
>>>>
>>>>
>> output:
>>>> |14122|517:511|inuse| none 2011-09-21
>>>> 23:31:41|14122|517:511|inuse|utils.pm:run_ssh_command(6276)|SSH
>>>> command executed on vmguest-2, returning (0, "none") 2011-09-21
>>>> 23:31:41|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-21 23:31:41 2011-09-21
>>>> 23:31:46|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-21 23:31:46 2011-09-21
>>>>
>>>>23:31:48|14402|518:512|new|utils.pm:run_ssh_command(6262)|run_ssh_comma
>>>>nd
>>>>
>>>>
>> output:
>>>> |14402|518:512|new| start() = 1 2011-09-21
>>>> 23:31:48|14402|518:512|new|utils.pm:run_ssh_command(6276)|SSH
>>>> command executed on CSB308, returning (0, "start() = 1")
>>>> 2011-09-21
>>>> 23:31:48|14402|518:512|new|vmware.pm:load(808)|started
>>>>
>>>>/install/vmware_files/runningvms/CentOS5_5-base10-v0vmguest-10/CentOS5_
>>>>5-ba
>>>>
>>>>
>> se10-v0vmguest-10.vmx on CSB308
>>>> 2011-09-21
>>>> 23:31:48|14402|518:512|new|utils.pm:insertloadlog(4710)|inserted
>>>> computer=17, startvm, started vm on CSB308
>>>>
>>>> |14402|518:512|new| /usr/bin/ssh -i /etc/vcl/vcl.key  -l root -p
>>>> 22 -x CSB308 'vmware-cmd
>>>>
>>>>/install/vmware_files/runningvms/CentOS5_5-base10-v0vmguest-10/CentOS5_
>>>>5-ba
>>>>
>>>>
>> se10-v0vmguest-10.vmx getstate' 2>&1
>>>> 2011-09-21 23:32:11|3929|vcld:main(165)|lastcheckin time updated
>>>> for management node 1: 2011-09-21 23:32:11 2011-09-21
>>>> 23:32:16|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-21 23:32:16 2011-09-21
>>>> 23:32:21|14122|517:511|inuse|utils.pm:check_connection(1765)|checking
>>>> for connection by admin on vmguest-2, attempt 29 2011-09-21
>>>> 23:32:21|14122|517:511|inuse|utils.pm:run_ssh_command(6180)|executing
>>>> SSH command on vmguest-2: |14122|517:511|inuse| /usr/bin/ssh -i
>>>> /etc/vcl/vcl.key  -l root -p 22 -x vmguest-2 'netstat -an' 2>&1
>>>> 2011-09-21 23:32:21|3929|vcld:main(165)|lastcheckin time updated
>>>> for management node 1: 2011-09-21 23:32:21 2011-09-21
>>>> 23:32:21|14122|517:511|inuse|utils.pm:run_ssh_command(6180)|executing
>>>> SSH command on vmguest-2: |14122|517:511|inuse| /usr/bin/ssh -i
>>>> /etc/vcl/vcl.key  -l root -p 22 -x vmguest-2 'who' 2>&1
>>>> 2011-09-21
>>>>
>>>>23:32:22|14122|517:511|inuse|utils.pm:run_ssh_command(6262)|run_ssh_com
>>>>mand
>>>>
>>>>
>> output:
>>>> |14122|517:511|inuse| none 2011-09-21
>>>> 23:32:22|14122|517:511|inuse|utils.pm:run_ssh_command(6276)|SSH
>>>> command executed on vmguest-2, returning (0, "none") 2011-09-21
>>>> 23:32:26|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-21 23:32:26 2011-09-21
>>>>
>>>>23:32:28|14402|518:512|new|utils.pm:run_ssh_command(6262)|run_ssh_comma
>>>>nd
>>>>
>>>>
>> output:
>>>> |14402|518:512|new| getstate() = on 2011-09-21
>>>> 23:32:28|14402|518:512|new|utils.pm:run_ssh_command(6276)|SSH
>>>> command executed on CSB308, returning (0, "getstate() = on")
>>>> 2011-09-21
>>>> 23:32:28|14402|518:512|new|vmware.pm:load(831)|checking state of
>>>> vm vmguest-10 2011-09-21
>>>> 23:32:28|14402|518:512|new|utils.pm:insertloadlog(4710)|inserted
>>>> computer=17, vmstage1, node has been turned on 2011-09-21
>>>> 23:32:28|14402|518:512|new|vmware.pm:load(838)|stage1 completed
>>>> vm vmguest-10 has been turned on 2011-09-21
>>>> 23:32:28|14402|518:512|new|vmware.pm:load(839)|eth0MAC
>>>> 00:50:56:1a:01:13 privateIPaddress 129.207.46.26 2011-09-21
>>>> 23:32:28|14402|518:512|new|vmware.pm:load(848)|vmguest-10 ROUND 1
>>>> checks loop 0 of 40
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> |14402|518:512|new| /usr/bin/ssh -i /etc/vcl/vcl.key  -l root -p
>>>> 22 -x CSB308 'vmware-cmd
>>>>
>>>>/install/vmware_files/runningvms/CentOS5_5-base10-v0vmguest-10/CentOS5_
>>>>5-ba
>>>>
>>>>
>> se10-v0vmguest-10.vmx getstate' 2>&1
>>>> 2011-09-22 00:05:41|3929|vcld:main(165)|lastcheckin time updated
>>>> for management node 1: 2011-09-22 00:05:41 2011-09-22
>>>> 00:05:46|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-22 00:05:46 2011-09-22
>>>> 00:05:51|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-22 00:05:51 2011-09-22
>>>> 00:05:56|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-22 00:05:56 2011-09-22
>>>>
>>>>00:06:00|14402|518:512|new|utils.pm:run_ssh_command(6262)|run_ssh_comma
>>>>nd
>>>>
>>>>
>> output:
>>>> |14402|518:512|new| getstate() = on2011-09-22
>>>> 00:06:00|14402|518:512|new|utils.pm:run_ssh_command(6276)|SSH
>>>> command executed on CSB308, returning (0, "getstate() =
>>>> on")2011-09-22
>>>> 00:06:00|14402|518:512|new|vmware.pm:load(852)|rechecking state
>>>> of vm vmguest-10
>>>>
>>>>/install/vmware_files/runningvms/CentOS5_5-base10-v0vmguest-10/CentOS5_
>>>>5-ba
>>>>
>>>>
>> se10-v0vmguest-10.vmx2011-09-22
>>>> 00:06:00|14402|518:512|new|vmware.pm:load(857)|vm vmguest-10
>>>> reports on 2011-09-22
>>>> 00:06:00|14402|518:512|new|vmware.pm:load(868)|sshd is NOT active
>>>> on vmguest-10 yet 2011-09-22
>>>> 00:06:01|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-22 00:06:01 2011-09-22
>>>> 00:06:06|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-22 00:06:06 2011-09-22
>>>> 00:06:10|14402|518:512|new|vmware.pm:load(848)|vmguest-10 ROUND 1
>>>> checks loop 66 of 40 2011-09-22
>>>> 00:06:10|14402|518:512|new|utils.pm:run_ssh_command(6180)|executing
>>>> SSH command on CSB308: |14402|518:512|new| /usr/bin/ssh -i
>>>> /etc/vcl/vcl.key  -l root -p 22 -x CSB308 'vmware-cmd
>>>>
>>>>/install/vmware_files/runningvms/CentOS5_5-base10-v0vmguest-10/CentOS5_
>>>>5-ba
>>>>
>>>>
>> se10-v0vmguest-10.vmx getstate' 2>&12011-09-22
>>>> 00:06:11|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-22 00:06:11 2011-09-22
>>>> 00:06:16|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-22 00:06:16 2011-09-22
>>>> 00:06:21|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-22 00:06:21 2011-09-22
>>>> 00:06:26|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-22 00:06:26 2011-09-22
>>>>
>>>>00:06:30|14402|518:512|new|utils.pm:run_ssh_command(6262)|run_ssh_comma
>>>>nd
>>>>
>>>>
>> output:
>>>> |14402|518:512|new| getstate() = on 2011-09-22
>>>> 00:06:30|14402|518:512|new|utils.pm:run_ssh_command(6276)|SSH
>>>> command executed on CSB308, returning (0, "getstate() = on")
>>>> 2011-09-22
>>>> 00:06:30|14402|518:512|new|vmware.pm:load(852)|rechecking state
>>>> of vm vmguest-10
>>>>
>>>>/install/vmware_files/runningvms/CentOS5_5-base10-v0vmguest-10/CentOS5_
>>>>5-ba
>>>>
>>>>
>> se10-v0vmguest-10.vmx
>>>> 2011-09-22 00:06:30|14402|518:512|new|vmware.pm:load(857)|vm
>>>> vmguest-10 reports on 2011-09-22
>>>> 00:06:31|14402|518:512|new|vmware.pm:load(868)|sshd is NOT active
>>>> on vmguest-10 yet 2011-09-22
>>>> 00:06:31|3929|vcld:main(165)|lastcheckin time updated for
>>>> management node 1: 2011-09-22 00:06:31 No recipient addresses
>>>> found in header 2011-09-22
>>>> 00:06:31|14402|518:512|new|utils.pm:mail(1348)|SUCCESS -- Sending
>>>> mail To: , PROBLEM -- vmware.pm
>>>>
>>>>
>>>> |14402|518:512|new| ---- CRITICAL ---- |14402|518:512|new|
>>>> 2011-09-22 00:06:31|14402|518:512|new|vmware.pm:load(967)|could
>>>> not load
>>>>
>>>>/install/vmware_files/runningvms/CentOS5_5-base10-v0vmguest-10/CentOS5_
>>>>5-ba
>>>>
>>>>
>> se10-v0vmguest-10.vmx on vmguest-10 on host CSB308|14402|518:512|new| (
>>0)
>>>> utils.pm, notify (line: 737) |14402|518:512|new| (-1) vmware.pm,
>>>> load (line: 967)|14402|518:512|new| (-2) new.pm, reload_image
>>>> (line: 665) |14402|518:512|new| (-3) new.pm, process (line: 266)
>>>> |14402|518:512|new| (-4) vcld, make_new_child (line: 594)
>>>> |14402|518:512|new| (-5) vcld, main (line: 341)
>>>>
>>>> 2011-09-22
>>>> 00:06:31|14402|518:512|new|utils.pm:insertloadlog(4710)|inserted
>>>> computer=17, failed, could not load vmx on CSB308
>>>>
>>>> |14402|518:512|new| ---- WARNING ----|14402|518:512|new|
>>>> 2011-09-22
>>>>
>>>>00:06:31|14402|518:512|new|new.pm:reload_image(670)|CentOS5_5-base10-v0
>>>>
>>>>
>> failed to load on vmguest-10, returning
>>>> |14402|518:512|new| ( 0) utils.pm, notify (line: 737)
>>>> |14402|518:512|new| (-1) new.pm, reload_image (line: 670)
>>>> |14402|518:512|new| (-2) new.pm, process (line: 266)
>>>> |14402|518:512|new| (-3) vcld, make_new_child (line: 594)
>>>> |14402|518:512|new| (-4) vcld, main (line: 341)
>>>>
>>>> 2011-09-22
>>>> 00:06:31|14402|518:512|new|utils.pm:insertloadlog(4710)|inserted
>>>> computer=17, loadimagefailed, CentOS5_5-base10-v0 failed to load
>>>> on vmguest-10
>>>>
>>>>
>>>> |14402|518:512|new| ---- WARNING ---- |14402|518:512|new|
>>>> 2011-09-22 00:06:31|14402|518:512|new|new.pm:process(313)|failed
>>>> to load vmguest-10 with CentOS5_5-base10-v0 |14402|518:512|new| (
>>>> 0) utils.pm, notify (line: 737) |14402|518:512|new| (-1) new.pm,
>>>> process (line: 313) |14402|518:512|new| (-2) vcld, make_new_child
>>>> (line: 594) |14402|518:512|new| (-3) vcld, main (line: 341)
>>>>
>>>> 2011-09-22
>>>>
>>>>00:06:31|14402|518:512|new|DataStructure.pm:get_computer_state_name(194
>>>>6)|a
>>>>
>>>>
>> ttempting to retrieve current state of computer vmguest-10 from the
>>>> database 2011-09-22
>>>>
>>>>00:06:31|14402|518:512|new|DataStructure.pm:get_computer_state_name(197
>>>>7)|r
>>>>
>>>>
>> etrieved current state of computer vmguest-10 from the database:
>>reloading
>>>> 2011-09-22
>>>> 00:06:31|14402|518:512|new|DataStructure.pm:_automethod(697)|data
>>>>
>>>>
>> structure updated:
>>>> $self->request_data->{reservation}{512}{computer}{state}{name}
>>>> |14402|518:512|new| computer_state_name = reloading No recipient
>>>> addresses found in header 2011-09-22
>>>> 00:06:32|14402|518:512|new|utils.pm:mail(1348)|SUCCESS -- Sending
>>>> mail To: , PROBLEM -- State.pm
>>>>
>>>> |14402|518:512|new| ---- CRITICAL ---- |14402|518:512|new|
>>>> 2011-09-22
>>>>
>>>>00:06:31|14402|518:512|new|State.pm:reservation_failed(290)|reservation
>>>>
>>>>
>> failed on vmguest-10: process failed after trying to load or make
>>available
>>>> |14402|518:512|new| ( 0) utils.pm, notify (line: 737)
>>>> |14402|518:512|new| (-1) State.pm, reservation_failed (line:
>>>> 290) |14402|518:512|new| (-2) new.pm, process (line: 316)
>>>> |14402|518:512|new| (-3) vcld, make_new_child (line: 594)
>>>> |14402|518:512|new| (-4) vcld, main (line: 341)
>>>>
>>>> 2011-09-22
>>>> 00:06:32|14402|518:512|new|utils.pm:insertloadlog(4710)|inserted
>>>> computer=17, failed, process failed after trying to load or make
>>>> available 2011-09-22
>>>> 00:06:32|14402|518:512|new|State.pm:reservation_failed(293)|inserted
>>>>
>>>>
>> computerloadlog entry
>>>> 2011-09-22
>>>> 00:06:32|14402|518:512|new|State.pm:reservation_failed(301)|updated
>>>> log ending value to 'failed', logid=451 2011-09-22
>>>>
>>>>00:06:32|14402|518:512|new|utils.pm:update_computer_state(2228)|compute
>>>>r
>>>>
>>>>
>> 17 state updated to: failed
>>>> 2011-09-22
>>>> 00:06:32|14402|518:512|new|State.pm:reservation_failed(312)|computer
>>>>
>>>>
>> vmguest-10 (17) state set to failed
>>>> 2011-09-22
>>>> 00:06:32|14402|518:512|new|utils.pm:update_request_state(2186)|request
>>>> 518 state updated to: failed, laststate to: new 2011-09-22
>>>> 00:06:32|14402|518:512|new|State.pm:reservation_failed(325)|set
>>>> request state to 'failed'/'new' 2011-09-22
>>>> 00:06:32|14402|518:512|new|utils.pm:is_inblockrequest(6972)|zero
>>>> rows were returned from database select 2011-09-22
>>>> 00:06:32|14402|518:512|new|State.pm:reservation_failed(343)|vmguest-10
>>>> is NOT in blockcomputers table 2011-09-22
>>>> 00:06:32|14402|518:512|new|State.pm:reservation_failed(346)|exiting
>>>> 1 2011-09-22
>>>> 00:06:32|14402|518:512|new|State.pm:DESTROY(905)|destructor
>>>> called, ref($self)=VCL::new 2011-09-22
>>>>
>>>>00:06:32|14402|518:512|new|utils.pm:delete_computerloadlog_reservation(
>>>>7551
>>>>
>>>>
>> )|removing computerloadlog entries matching loadstate = begin
>>>> 2011-09-22
>>>>
>>>>00:06:32|14402|518:512|new|utils.pm:delete_computerloadlog_reservation(
>>>>7598
>>>>
>>>>
>> )|deleted rows from computerloadlog for reservation id=512
>>>> 2011-09-22
>>>> 00:06:32|14402|518:512|new|State.pm:DESTROY(912)|removed
>>>> computerloadlog rows with loadstate=begin for reservation
>>>> 2011-09-22
>>>> 00:06:32|14402|518:512|new|State.pm:DESTROY(924)|number of
>>>> database handles state process created: 1 2011-09-22
>>>> 00:06:32|14402|518:512|new|State.pm:DESTROY(933)|process has a
>>>> database handle stored in $ENV{dbh}, attempting disconnect
>>>> 2011-09-22
>>>> 00:06:32|14402|518:512|new|State.pm:DESTROY(935)|$ENV{dbh}:
>>>> database disconnect successful 2011-09-22
>>>> 00:06:32|14402|518:512|new|State.pm:DESTROY(949)|VCL::new process
>>>> 14402 exiting 2011-09-22 00:06:32|3929|vcld:REAPER(744)|VCL
>>>> process exited for reservation 512
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ==========================
>>>>
>>>>
>>>> On 9/22/11 7:49 AM, "Aaron Peeler" <fapee...@ncsu.edu> wrote:
>>>>
>>>>> Hello Lei,
>>>>>
>>>>> Could you provide the log file for vcld related to this
>>>>> reservation failure. It's default location is
>>>>> /var/log/vcld.log
>>>>>
>>>>> Thanks, Aaron
>>>>>
>>>>>
>>>>> On Thu, Sep 22, 2011 at 2:19 AM, Huang,Lei <lhu...@pvamu.edu>
>>>>> wrote:
>>>>>> Dear VCL experts, I am working on extending our VCL Cloud
>>>>>> system for teaching purpose by adding some new computing
>>>>>> nodes. The VCL version is 2.1 and we use VMware server 1.0 in
>>>>>> each computing node. I have installed CentOS 5.0 and Vmware
>>>>>> server 1.0 on a new blade, configured the network and VCL.
>>>>>> However, I am stuck by the following failure when I tried to
>>>>>> reserve an image. ========================== State Est/Act
>>>>>> TimeTotal Timeconfirming image exists(22) 0:04/0:24 0:24
>>>>>> starting load process(40) 0:06/2:03 2:27 creating
>>>>>> configuration file(28) 0:02/1:01 3:28 starting virtual
>>>>>> machine(48) 0:03/0:42 4:10 machine booting(46) 1:08/34:43
>>>>>> 38:53 failed: could not load vmx on CSB308
>>>>>> ==================== Does anybody know what's wrong on my
>>>>>> setup? It takes very long time to boot an image, but failed
>>>>>> at the end. I am wondering if there is any instruction of how
>>>>>> to install a computing node that I can follow. Thanks a lot
>>>>>> in advance. Regards, Lei Huang (Ph.D.) Assistant Professor
>>>>>> Computer Science Department Prairie View A&M University SR
>>>>>> Collins Room 314, MailStop: 2515, Prairie View, TX 77446
>>>>>> Phone: (936)261-9878       Fax: (936)261-9866
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> -- Aaron Peeler Program Manager Virtual Computing Lab NC State
>>>>> University
>>>>>
>>>>> All electronic mail messages in connection with State business
>>>>> which are sent to or received by this account are subject to
>>>>> the NC Public Records Law and may be disclosed to third
>>>>> parties.
>>>>
>>>
>>>
>>>
>>> -- Thanks, Alex  Patterson User Support Services Operating System
>>> Analyst California State University, East Bay
>>
>>
>> - --
>> Jim O'Dell
>> Network Analyst
>> California State University Fullerton
>> Email: jod...@fullerton.edu
>> Phone: (657) 278-2256
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG v1.4.9 (MingW32)
>> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>>
>> iEYEARECAAYFAk58tLoACgkQREVHAOnXPYRiAwCgxIsL/zr2H2olSfDlgv/MXa6m
>> JBAAn0GAWC8L4ww9rbqifqm4qrxsobyr
>> =GAaB
>> -----END PGP SIGNATURE-----
>>
>
>
>
>--
>Thanks,
>Alex  Patterson
>User Support Services
>Operating System Analyst
>California State University, East Bay

Reply via email to