Hello,

Yes, both listener.py and rootimg.gz are both located at
/install/image/x86/installer_files/


But NOWHERE on the documentation page does it mention a symlink between
x86_64 and x86.

Ok, I added the symlinks in both locations, and it did seem to accept it:

nodeset d6100a image
d6100a: image image-x86_64-rh5image-rh66-v0

Which created this file in /tftpboot/pxelinux.cfg:


lrwxrwxrwx 1 root root   6 Mar 15 11:36 0A000019 -> d6100a

cat d6100a 
#image image-x86_64-rh5image-rh66-v0
DEFAULT xCAT
LABEL xCAT
 KERNEL xcat/image/x86_64/vmlinuz
 APPEND initrd=xcat/image/x86_64/initrd.img
imgurl=http://10.0.0.3//install/image/x86_64/installer_files/rootimg.gz
image=/install/image/x86_64/rh5image-rh66-v0.img blocks=512 action=save
installnic=eth0 reboot  noipv6
  IPAPPEND 2

I did a tabedit to add the nodetype.supportedarchs.


tabdump nodetype
#node,os,arch,profile,provmethod,supportedarchs,nodetype,comments,disable
"compute","rh6.0","x86_64","compute",,,"osi",,
"d6100a","image","x86","rh5image-rh66-v0","image","x86,x86_64",,,



However, when I do this:
rpower d6100a reset

I get this:
d6100a: Error: timeout

So, I guess I must be missing something that tells xCAT where the machine
is, and how to reach it.


Al Q


On 3/15/12 11:05 AM, "Dmitri Chebotarov" <dcheb...@gmu.edu> wrote:

>Evelio
>
>Could you please check that you have these files/folders as well?
>
>/install/image/x86/installer_files/listener.py
>/install/image/x86/installer_files/rootimg.gz
>
>Also, can you check that there are symlinks for x86 or x86_64 in
>/install/image/ and /tftpboot/xcat/image/, ie:
>
>$ ls -l
>x86
>x86_64 -> x86
>
>Thanks.
>
>On Mar 15, 2012, at 9:56 , Evelio Quiros wrote:
>
>> Thanks Dmitri,
>> 
>> In following this article, I get to the bottom of the page, where I put
>>in
>> the 3 files needed for a stateless image.
>> 
>> I place the 3 files in the located indicated, and when I run
>> 
>> nodeset d6100a image
>> 
>> I get this:
>> 
>> Error: vmlinuz and initrd.img not found at /tftpboot/xcat/image/x86_64
>> Error: Some nodes failed to set up image resources, aborting
>> 
>> But vmlinuz and initrd.img are at /tftpboot/xcat/image/x86_64
>> 
>> 
>> Is there something else that needs to happen first ?
>> 
>> 
>> Also, the last step talks about NFS servers for the image store.
>> Are these required ?
>> 
>> Thanks for all your help,
>> Al Quiros
>> 
>> 
>> 
>> On 3/14/12 4:05 PM, "Dmitri Chebotarov" <4dim...@gmail.com> wrote:
>> 
>>> Evelio 
>>> 
>>> Please follow this article to add support for 'image' and 'install' :
>>> 
>>> 
>>>https://cwiki.apache.org/VCL/adding-support-for-partimage-and-partimage-
>>>ng
>>> -to-xcat-2x-unofficial.html
>>> 
>>> Thanks. 
>>> 
>>> -- 
>>> Dmitri Chebotarov
>>> 
>>> 
>>> On Wednesday, March 14, 2012 at 15:37 , Evelio Quiros wrote:
>>> 
>>>> Hello again,
>>>> 
>>>> Dimitri, thanks for the advice.
>>>> 
>>>> I have a question about these commands.
>>>> Below, you wrote "nodeset d6100a image",
>>>> 
>>>> But there is no image argument for nodeset.
>>>> Here is the man page:
>>>> 
>>>> nodeset [-h|--help|-v|--version]
>>>> nodeset <noderange>
>>>> 
>>>> 
>>>>[install|shell|boot|runcmd=bmcsetup|netboot|iscsiboot|osimage=<imagenam
>>>>e>
>>>> |s
>>>> tatelite]
>>>> 
>>>> When I try the command as-is, I get this:
>>>> 
>>>> 
>>>> nodeset d6100a image
>>>> d6100a: Error: Unable to identify plugin for this command, check
>>>> relevant
>>>> tables: nodetype.os
>>>> Error: Some nodes failed to set up image resources, aborting
>>>> 
>>>> I have done tabdump on the various tables, and done tabedit to modify
>>>> them
>>>> to my environment.
>>>> 
>>>> 
>>>> I know this is not an xCAT list, but your guidance would be
>>>>appreciated.
>>>> 
>>>> Thanks,
>>>> Al Quiros
>>>> 
>>>> 
>>>> 
>>>> On 3/13/12 4:45 PM, "Dmitri Chebotarov" <dcheb...@gmu.edu
>>>> (mailto:dcheb...@gmu.edu)> wrote:
>>>> 
>>>>> Evelio,
>>>>> 
>>>>> You should be able to capture image via xCAT before you can use
>>>> VCL/xCAT.
>>>>> 
>>>>> To capture image via xCAT:
>>>>> 
>>>>> nodech d6100a nodetype.os=image nodetype.profile=rh5image-rh66-v0
>>>>> nodeset d6100a image - this will create PXEboot config file for
>>>> d6100a:
>>>>> 
>>>>> cat /tftpboot/pxelinux.cfg/<d6100a-PXE-if-mac>
>>>>> 
>>>>> #image rh5image-rh66-v0
>>>>> DEFAULT xCAT
>>>>> LABEL xCAT
>>>>> KERNEL xcat/image/x86_64/vmlinuz
>>>>> APPEND initrd=xcat/image/x86_64/initrd.img
>>>>> 
>>>> 
>>>>imgurl=http://xcat-master/install/image/x86_64/installer_files/rootimg.
>>>>gz
>>>>> image=/install/image/x86_64/rh5image-rh66-v0.img blocks=512
>>>>> action=save installnic=eth0 reboot noipv6
>>>>> IPAPPEND 2
>>>>> 
>>>>> 'tabdump nodetype' should look similar to this - note that arch is
>>>> x86:
>>>>> 
>>>>> 
>>>> 
>>>>#node,os,arch,profile,provmethod,supportedarchs,nodetype,comments,disab
>>>>le
>>>>> ...
>>>>> "d6100a","image","x86","rh5image-rh66-v0","image","x86,x86_64",,,
>>>>> ...
>>>>> 
>>>>> Then do 'rpower d6100a reset'. This will restart d6100a and when node
>>>>> boots over PXE it will boot into
>>>>> http://xcat-master/install/image/x86_64/installer_files/rootimg.gz
>>>> and,
>>>>> given that image works fine and maps NFS store OK, it dump hd image
>>>>>to
>>>>> /install/image/x86_64/rh5image-rh66-v0.img .
>>>>> 
>>>>> If it's successful then to install from the image:
>>>>> 
>>>>> nodeset d6100a install
>>>>> 
>>>>> 'tabdump nodetype' should look similar to this - provmethod changes
>>>> from
>>>>> image to install:
>>>>> 
>>>>> 
>>>> 
>>>>#node,os,arch,profile,provmethod,supportedarchs,nodetype,comments,disab
>>>>le
>>>>> ...
>>>>> "d6100a","image","x86","rh5image-rh66-v0","install","x86,x86_64",,,
>>>>> ...
>>>>> 
>>>>> If these steps work OK, then you can use VCL to capture bare-metal
>>>> image.
>>>>> VCL uses 'nodeset <node> image' and 'nodeset <node> install'
>>>> commands, so
>>>>> it's good idea to make them work before using VCL.
>>>>> 
>>>>> Thanks.
>>>>> On Mar 13, 2012, at 16:11 , Evelio Quiros wrote:
>>>>> 
>>>>>> Hello Again,
>>>>>> 
>>>>>> After trying again to capture a running image on a bare metal node,
>>>> I
>>>>>> get
>>>>>> a failure message:
>>>>>> Any ideas ?
>>>>>> 
>>>>>> Al Q
>>>>>> 
>>>>>> 
>>>>>> Added new image to database: 'rh6'
>>>>>> image.name (http://image.name): rh5image-rh66-v0
>>>>>> image.id: 6
>>>>>> imagerevision.id: 6
>>>>>> imagemeta.id: 3
>>>>>> resource.id: 16
>>>>>> 
>>>>>> 
>>>>>> 
>>>> 
>>>>-----------------------------------------------------------------------
>>>>--
>>>>>> --
>>>>>> -
>>>>>> Inserted imaging request to the database:
>>>>>> request ID: 1
>>>>>> reservation ID: 1
>>>>>> 
>>>>>> This process will now display the contents of the vcld.log file if
>>>> the
>>>>>> vcld
>>>>>> daemon is running. If you do not see many lines of additional
>>>> output,
>>>>>> exit
>>>>>> this
>>>>>> process, start the vcld daemon, and monitor the image capture
>>>> process by
>>>>>> running
>>>>>> the command:
>>>>>> tail -f /var/log/vcld.log | grep '1:1'
>>>>>> 
>>>>>> 
>>>>>> 
>>>> 
>>>>-----------------------------------------------------------------------
>>>>--
>>>>>> --
>>>>>> -
>>>>>> 2012-03-13 16:03:34|2012|vcld:main(167)|lastcheckin time updated for
>>>>>> management node 1: 2012-03-13 16:03:34
>>>>>> 2012-03-13 
>>>> 16:03:39|6899|utils.pm:setup_get_array_choice(9947)|choices
>>>>>> argument:
>>>>>> 2012-03-13 16:03:39|2012|vcld:main(167)|lastcheckin time updated for
>>>>>> management node 1: 2012-03-13 16:03:39
>>>>>> 2012-03-13 16:03:44|2012|vcld:main(167)|lastcheckin time updated for
>>>>>> management node 1: 2012-03-13 16:03:44
>>>>>> 2012-03-13 16:03:48|6899|utils.pm:insert_request(8358)|inserted new
>>>>>> reload
>>>>>> request into request table, request id=1
>>>>>> 2012-03-13 16:03:48|6899|utils.pm:insert_request(8389)|inserted new
>>>>>> reload
>>>>>> request into reservation table, reservation id=1
>>>>>> 2012-03-13 16:03:50|2012|vcld:main(167)|lastcheckin time updated for
>>>>>> management node 1: 2012-03-13 16:03:49
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|2012|1:1|image|utils.pm:reservation_being_processed(8938)|comp
>>>>ut
>>>>>> er
>>>>>> loadlog 'begin' entry does NOT exist for reservation 1
>>>>>> 2012-03-13 
>>>> 16:03:50|2012|1:1|image|utils.pm:run_command(9010)|executed
>>>>>> command: pgrep -fl 'vcld [0-9]+:1 ', pid: 7004, exit status: 0,
>>>> output:
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|2012|1:1|image|utils.pm:is_management_node_process_running(919
>>>>2)
>>>>>> |p
>>>>>> rocess is NOT running, identifier: 'vcld [0-9]+:1 '
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|2012|1:1|image|utils.pm:reservation_being_processed(8959)|rese
>>>>rv
>>>>>> at
>>>>>> ion is NOT currently being processed
>>>>>> 2012-03-13 16:03:50|2012|1:1|image|vcld:main(278)|reservation 1 is
>>>> NOT
>>>>>> already being processed
>>>>>> 2012-03-13 
>>>>>> 16:03:50|2012|1:1|image|utils.pm:get_request_info(4520)|standalone
>>>>>> affiliation found: Local
>>>>>> 2012-03-13 16:03:50|2012|1:1|image|vcld:main(283)|retrieved request
>>>>>> information from database
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|2012|1:1|image|DataStructure.pm:is_parent_reservation(991)|ret
>>>>ur
>>>>>> ni
>>>>>> ng true: parent reservation ID for this request: 1
>>>>>> 2012-03-13 
>>>>>> 16:03:50|2012|1:1|image|utils.pm:update_request_state(1991)|request
>>>> 1
>>>>>> state updated to: pending, laststate to: image
>>>>>> 2012-03-13 
>>>> 16:03:50|2012|1:1|image|utils.pm:insertloadlog(3875)|inserted
>>>>>> computer=1, begin, beginning to process, state is image
>>>>>> 2012-03-13 16:03:50|2012|1:1|image|vcld:make_new_child(515)|loaded
>>>>>> VCL::image module
>>>>>> 2012-03-13 16:03:50|2012|1:1|image|vcld:make_new_child(539)|current
>>>>>> number
>>>>>> of forked kids: 1
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|vcld:make_new_child(555)|vcld
>>>>>> environment variable set to 0 for this process
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'test'
>>>> key for
>>>>>> VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>> 'forimaging'
>>>>>> key
>>>>>> for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>> 'reservation'
>>>>>> key for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'userid'
>>>> key
>>>>>> for
>>>>>> VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>>>> 'daterequested'
>>>>>> key for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>>>> 'RESERVATIONID'
>>>>>> key for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'UPDATED'
>>>> key
>>>>>> for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>> 'SUBIMAGE' key
>>>>>> for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>> 'CHECKTIME'
>>>>>> key
>>>>>> for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'state'
>>>> key
>>>>>> for
>>>>>> VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>> 'laststate'
>>>>>> key
>>>>>> for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>> 'PRELOADONLY'
>>>>>> key for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>> 'laststateid'
>>>>>> key for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'user'
>>>> key for
>>>>>> VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'id' key
>>>> for
>>>>>> VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'PID' key
>>>> for
>>>>>> VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>> 'DURATION' key
>>>>>> for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'PPID'
>>>> key for
>>>>>> VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>> 'datemodified'
>>>>>> key for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>>>> 'RESERVATIONCOUNT' key for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'end' key
>>>> for
>>>>>> VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'stateid'
>>>> key
>>>>>> for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>> 'PARENTIMAGE'
>>>>>> key for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>> 'checkuser'
>>>>>> key
>>>>>> for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'preload'
>>>> key
>>>>>> for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set
>>>>>> 'NOTICEINTERVAL'
>>>>>> key for VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'start'
>>>> key
>>>>>> for
>>>>>> VCL::image object from arguments
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(172)|set 'logid'
>>>> key
>>>>>> for
>>>>>> VCL::image object from arguments
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(361)|VCL::Module:
>>>>:O
>>>>>> S:
>>>>>> :Linux::ManagementNode module loaded
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux::Mana
>>>>ge
>>>>>> me
>>>>>> ntNode object created for image <not set>, address: 3fdf4b8
>>>>>> 2012-03-13 
>>>>>> 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data
>>>>>> structure updated:
>>>>>> $self->request_data->{reservation}{0}{computer}{hostname}
>>>>>> |7018|1:1|image| computer_hostname = vcldev01.p.fiu.edu
>>>>>> 2012-03-13 
>>>>>> 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data
>>>>>> structure updated:
>>>>>> $self->request_data->{reservation}{0}{computer}{NODENAME}
>>>>>> |7018|1:1|image| computer_node_name = vcldev01
>>>>>> 2012-03-13 
>>>>>> 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data
>>>>>> structure updated:
>>>>>> $self->request_data->{reservation}{0}{computer}{SHORTNAME}
>>>>>> |7018|1:1|image| computer_short_name = vcldev01
>>>>>> 2012-03-13 
>>>>>> 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data
>>>>>> structure updated:
>>>>>> $self->request_data->{reservation}{0}{computer}{IPaddress}
>>>>>> |7018|1:1|image| computer_ip_address = 10.106.128.12
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(366)|VCL::Module:
>>>>:O
>>>>>> S:
>>>>>> :Linux::ManagementNode OS object created, address: 3fdf4b8
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|Module.pm:new(192)|VCL::image
>>>> object
>>>>>> created for state image, address: 3e02078
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|State.pm:initialize(86)|obtained
>>>> a
>>>>>> database handle for this state process, stored as $ENV{dbh}
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|State.pm:check_image_os(762)|no
>>>>>> corrections need to be made to image OS: rh5image
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|DataStructure.pm:is_parent_reservation(991)|ret
>>>>ur
>>>>>> ni
>>>>>> ng true: parent reservation ID for this request: 1
>>>>>> 2012-03-13 
>>>>>> 
>>>> 16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7098)|reservation
>>>>>> count: 1
>>>>>> 2012-03-13 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7117)|PARENTIMAGE:
>>>>>> 1
>>>>>> 2012-03-13 
>>>>>> 
>>>> 16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7118)|SUBIMAGE: 0
>>>>>> 2012-03-13 
>>>>>> 16:03:50|7018|1:1|image|utils.pm:rename_vcld_process(7136)|renamed
>>>>>> process
>>>>>> to 'vcld 1:1 image d6100a rh5image-rh66-v0 admin'
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|DataStructure.pm:is_parent_reservation(991)|ret
>>>>ur
>>>>>> ni
>>>>>> ng true: parent reservation ID for this request: 1
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|DataStructure.pm:is_parent_reservation(991)|ret
>>>>ur
>>>>>> ni
>>>>>> ng true: parent reservation ID for this request: 1
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|Module.pm:create_os_object(298)|VCL::Module::OS
>>>>::
>>>>>> Li
>>>>>> nux module loaded
>>>>>> 2012-03-13 
>>>>>> 
>>>> 16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(335)|management
>>>>>> node
>>>>>> OS object has already been created, address: 3fdf4b8, returning 1
>>>>>> 2012-03-13 
>>>>>> 16:03:50|7018|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux
>>>> object
>>>>>> created for image rh5image-rh66-v0, address: 3fe23d8
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|Module.pm:create_os_object(304)|VCL::Module::OS
>>>>::
>>>>>> Li
>>>>>> nux OS object created for rh5image-rh66-v0, address: 3fe23d8
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:initialize(110)|XCATROOT
>>>>>> environment variable is not set, using /opt/xcat
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:initialize(128)|xCAT root
>>>>>> path
>>>>>> found: /opt/xcat
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT.pm:initialize(130)|xCAT
>>>> module
>>>>>> initialized
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(110)|XCATROOT
>>>>>> environment variable is not set, using /opt/xcat
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(128)|xCAT
>>>> root
>>>>>> path
>>>>>> found: /opt/xcat
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(130)|xCAT
>>>> module
>>>>>> initialized
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|Module.pm:create_provisioning_object(420)|VCL::
>>>>Mo
>>>>>> du
>>>>>> le::Provisioning::xCAT2 module loaded
>>>>>> 2012-03-13 
>>>>>> 
>>>> 16:03:50|7018|1:1|image|Module.pm:create_mn_os_object(335)|management
>>>>>> node
>>>>>> OS object has already been created, address: 3fdf4b8, returning 1
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|Module.pm:new(200)|VCL::Module::Provisioning::x
>>>>CA
>>>>>> T2
>>>>>> object created for computer d6100a, address: 3fe2570
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(110)|XCATROOT
>>>>>> environment variable is not set, using /opt/xcat
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(128)|xCAT
>>>> root
>>>>>> path
>>>>>> found: /opt/xcat
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|xCAT2.pm:initialize(130)|xCAT
>>>> module
>>>>>> initialized
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|Module.pm:create_provisioning_object(426)|VCL::
>>>>Mo
>>>>>> du
>>>>>> le::Provisioning::xCAT2 provisioner object created for d6100a,
>>>> address:
>>>>>> 3fe2570
>>>>>> 2012-03-13 
>>>> 16:03:50|7018|1:1|image|State.pm:initialize(126)|returning 1
>>>>>> 2012-03-13 
>>>> 16:03:50|7018|1:1|image|vcld:make_new_child(565)|VCL::image
>>>>>> object created and initialized
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:mail(1255)|SUCCESS --
>>>>>> Sending
>>>>>> mail To: evq...@fiu.edu (mailto:evq...@fiu.edu), VCL IMAGE Creation
>>>> Started: rh5image-rh66-v0
>>>>>> 2012-03-13 
>>>> 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2434)|image
>>>>>> OS
>>>>>> install type: partimage
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(2910)|manage
>>>>me
>>>>>> nt
>>>>>> node identifier argument was not specified
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(2932)|attemp
>>>>ti
>>>>>> ng
>>>>>> to determine repository path for image on vcldev01.p.fiu.edu:
>>>>>> |7018|1:1|image| image id: 6
>>>>>> |7018|1:1|image| OS name: rh5image
>>>>>> |7018|1:1|image| OS type: linux
>>>>>> |7018|1:1|image| OS install type: partimage
>>>>>> |7018|1:1|image| OS source path: image
>>>>>> |7018|1:1|image| architecture: x86_64
>>>>>> 2012-03-13 
>>>>>> 
>>>> 16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(2996)|did
>>>>not
>>>>>> find any images under /images/linux_image/x86_64 on
>>>> vcldev01.p.fiu.edu
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|xCAT.pm:_get_image_repository_path(3006)|return
>>>>in
>>>>>> g
>>>>>> repository path for vcldev01.p.fiu.edu: /images/image/x86_64
>>>>>> 2012-03-13 
>>>> 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2444)|image
>>>>>> repository path: /images/image/x86_64
>>>>>> 2012-03-13 
>>>> 16:03:50|7018|1:1|image|utils.pm:run_command(9010)|executed
>>>>>> command: du -c /images/image/x86_64/*rh5image-rh66-v0* 2>&1 | grep
>>>> total
>>>>>> 2>&1, pid: 7030, exit status: 1, output:
>>>>>> |7018|1:1|image| 0 total
>>>>>> 2012-03-13 
>>>> 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2506)|image
>>>>>> does NOT exist: rh5image-rh66-v0
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|xCAT2.pm:_get_image_template_path(2084)|managem
>>>>en
>>>>>> t
>>>>>> node identifier argument was not specified
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|xCAT2.pm:_get_image_template_path(2115)|attempt
>>>>in
>>>>>> g
>>>>>> to determine template path for image:
>>>>>> |7018|1:1|image| image name: rh5image-rh66-v0
>>>>>> |7018|1:1|image| OS install type: partimage
>>>>>> |7018|1:1|image| OS source path: image
>>>>>> |7018|1:1|image| xCAT 2.x OS source path: image
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|xCAT2.pm:_get_image_template_path(2123)|returni
>>>>ng
>>>>>> :
>>>>>> /opt/xcat/share/xcat/install/image
>>>>>> 2012-03-13 
>>>>>> 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2518)|template
>>>>>> repository path for rh5image-rh66-v0:
>>>> /opt/xcat/share/xcat/install/image
>>>>>> 2012-03-13 
>>>>>> 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2530)|template
>>>>>> file does not exist:
>>>>>> /opt/xcat/share/xcat/install/image/rh5image-rh66-v0.tmpl
>>>>>> 2012-03-13 
>>>> 16:03:50|7018|1:1|image|xCAT.pm:does_image_exist(2570)|image
>>>>>> rh5image-rh66-v0 does NOT exist on this management node
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|image.pm:process(145)|image
>>>>>> rh5image-rh66-v0 does not exist in the repository
>>>>>> 2012-03-13 
>>>>>> 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data
>>>>>> structure updated:
>>>>>> $self->request_data->{reservation}{1}{image}{lastupdate}
>>>>>> |7018|1:1|image| image_lastupdate = 2012-03-13 16:03:50
>>>>>> 2012-03-13 
>>>>>> 16:03:50|7018|1:1|image|DataStructure.pm:_automethod(834)|data
>>>>>> structure updated:
>>>>>> $self->request_data->{reservation}{1}{imagerevision}{datecreated}
>>>>>> |7018|1:1|image| imagerevision_date_created = 2012-03-13 16:03:50
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|image.pm:process(161)|calling
>>>>>> provisioning module's capture() subroutine
>>>>>> 2012-03-13 
>>>>>> 
>>>> 16:03:50|7018|1:1|image|xCAT2.pm:capture(776)|image=rh5image-rh66-v0,
>>>>>> computer=d6100a
>>>>>> 2012-03-13 
>>>>>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5380)|executing SSH
>>>>>> command on d6100a:
>>>>>> |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o
>>>>>> StrictHostKeyChecking=no -l root -p 22 -x d6100a 'chown root
>>>>>> currentimage.txt; chmod 777 currentimage.txt' 2>&1
>>>>>> 2012-03-13 
>>>>>> 
>>>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5464)|run_ssh_command
>>>>>> output:
>>>>>> |7018|1:1|image| Warning: Permanently added 'd6100a,10.0.0.25'
>>>> (RSA) to
>>>>>> the list of known hosts.
>>>>>> |7018|1:1|image| Permission denied, please try again.
>>>>>> |7018|1:1|image| Permission denied, please try again.
>>>>>> |7018|1:1|image| Permission denied
>>>>>> (publickey,gssapi-keyex,gssapi-with-mic,password).
>>>>>> 2012-03-13 
>>>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5474)|SSH
>>>>>> command executed on d6100a, command:
>>>>>> |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o
>>>>>> StrictHostKeyChecking=no -l root -p 22 -x d6100a 'chown root
>>>>>> currentimage.txt; chmod 777 currentimage.txt' 2>&1
>>>>>> |7018|1:1|image| returning (255, "Warning: Permanently added
>>>> 'd6...")
>>>>>> 2012-03-13 
>>>>>> 
>>>> 16:03:50|7018|1:1|image|utils.pm:write_currentimage_txt(5685)|updated
>>>>>> ownership and permissions on currentimage.txt
>>>>>> 2012-03-13 
>>>>>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5380)|executing SSH
>>>>>> command on d6100a:
>>>>>> |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o
>>>>>> StrictHostKeyChecking=no -l root -p 22 -x d6100a 'echo -e
>>>>>> 
>>>>>> 
>>>> 
>>>>"rh5image-rh66-v0\r\nid=6\r\nprettyname=rh6\r\nimagerevision_id=6\r\nim
>>>>ag
>>>>>> er
>>>>>> evision_datecreated=2012-03-13
>>>>>> 16:03:50\r\ncomputer_id=1\r\ncomputer_hostname=d6100a" >
>>>>>> currentimage.txt
>>>>>> && cat currentimage.txt' 2>&1
>>>>>> 2012-03-13 
>>>>>> 
>>>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5464)|run_ssh_command
>>>>>> output:
>>>>>> |7018|1:1|image| Warning: Permanently added 'd6100a,10.0.0.25'
>>>> (RSA) to
>>>>>> the list of known hosts.
>>>>>> |7018|1:1|image| Permission denied, please try again.
>>>>>> |7018|1:1|image| Permission denied, please try again.
>>>>>> |7018|1:1|image| Permission denied
>>>>>> (publickey,gssapi-keyex,gssapi-with-mic,password).
>>>>>> 2012-03-13 
>>>> 16:03:50|7018|1:1|image|utils.pm:run_ssh_command(5474)|SSH
>>>>>> command executed on d6100a, command:
>>>>>> |7018|1:1|image| /usr/bin/ssh -i /etc/vcl/vcl.key -o
>>>>>> StrictHostKeyChecking=no -l root -p 22 -x d6100a 'echo -e
>>>>>> 
>>>>>> 
>>>> 
>>>>"rh5image-rh66-v0\r\nid=6\r\nprettyname=rh6\r\nimagerevision_id=6\r\nim
>>>>ag
>>>>>> er
>>>>>> evision_datecreated=2012-03-13
>>>>>> 16:03:50\r\ncomputer_id=1\r\ncomputer_hostname=d6100a" >
>>>>>> currentimage.txt
>>>>>> && cat currentimage.txt' 2>&1
>>>>>> |7018|1:1|image| returning (255, "Warning: Permanently added
>>>> 'd6...")
>>>>>> |7018|1:1|image| ---- WARNING ----
>>>>>> |7018|1:1|image| 2012-03-13
>>>>>> 
>>>> 16:03:50|7018|1:1|image|utils.pm:write_currentimage_txt(5699)|failed
>>>>to
>>>>>> create currentimage.txt file on d6100a:
>>>>>> |7018|1:1|image| Warning: Permanently added 'd6100a,10.0.0.25'
>>>> (RSA) to
>>>>>> the list of known hosts.
>>>>>> |7018|1:1|image| Permission denied, please try again.
>>>>>> |7018|1:1|image| Permission denied, please try again.
>>>>>> |7018|1:1|image| Permission denied
>>>>>> (publickey,gssapi-keyex,gssapi-with-mic,password).
>>>>>> |7018|1:1|image| ( 0) utils.pm, write_currentimage_txt (line: 5699)
>>>>>> |7018|1:1|image| (-1) xCAT2.pm, capture (line: 779)
>>>>>> |7018|1:1|image| (-2) image.pm, process (line: 162)
>>>>>> |7018|1:1|image| (-3) vcld, make_new_child (line: 568)
>>>>>> |7018|1:1|image| (-4) vcld, main (line: 346)
>>>>>> |7018|1:1|image| ---- WARNING ----
>>>>>> |7018|1:1|image| 2012-03-13
>>>>>> 16:03:50|7018|1:1|image|xCAT2.pm:capture(783)|unable to update
>>>>>> currentimage.txt on d6100a
>>>>>> |7018|1:1|image| ( 0) xCAT2.pm, capture (line: 783)
>>>>>> |7018|1:1|image| (-1) image.pm, process (line: 162)
>>>>>> |7018|1:1|image| (-2) vcld, make_new_child (line: 568)
>>>>>> |7018|1:1|image| (-3) vcld, main (line: 346)
>>>>>> |7018|1:1|image| ---- WARNING ----
>>>>>> |7018|1:1|image| 2012-03-13
>>>>>> 16:03:50|7018|1:1|image|image.pm:process(166)|rh5image-rh66-v0 image
>>>>>> failed to be captured by provisioning module
>>>>>> |7018|1:1|image| ( 0) image.pm, process (line: 166)
>>>>>> |7018|1:1|image| (-1) vcld, make_new_child (line: 568)
>>>>>> |7018|1:1|image| (-2) vcld, main (line: 346)
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|DataStructure.pm:get_computer_private_ip_addres
>>>>s(
>>>>>> 15
>>>>>> 81)|attempting to retrieve private IP address for computer: d6100a
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|DataStructure.pm:get_computer_private_ip_addres
>>>>s(
>>>>>> 15
>>>>>> 85)|retrieved contents of /etc/hosts on this management node,
>>>> contains 9
>>>>>> lines
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|DataStructure.pm:get_computer_private_ip_addres
>>>>s(
>>>>>> 16
>>>>>> 45)|returning IP address from /etc/hosts file: 10.0.0.25
>>>>>> 2012-03-13 
>>>> 16:03:50|7018|1:1|image|utils.pm:is_inblockrequest(6163)|zero
>>>>>> rows were returned from database select
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|DataStructure.pm:get_image_affiliation_name(203
>>>>5)
>>>>>> |i
>>>>>> mage owner id: 1
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2709)|database
>>>>>> requested (information_schema) does not match handle stored in
>>>> $ENV{dbh}
>>>>>> (vcl:localhost)
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2760)|database
>>>>>> handle stored in $ENV{dbh}
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|DataStructure.pm:retrieve_user_data(1352)|attem
>>>>pt
>>>>>> in
>>>>>> g to retrieve and store data for user: user.id = '1'
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2709)|database
>>>>>> requested (vcl) does not match handle stored in $ENV{dbh}
>>>>>> (information_schema:localhost)
>>>>>> 2012-03-13 16:03:50|7018|1:1|image|utils.pm:getnewdbh(2760)|database
>>>>>> handle stored in $ENV{dbh}
>>>>>> 2012-03-13 
>>>>>> 
>>>> 16:03:50|7018|1:1|image|DataStructure.pm:retrieve_user_data(1415)|data
>>>>>> has
>>>>>> been retrieved for user: admin (id: 1)
>>>>>> 2012-03-13 16:03:51|7018|1:1|image|utils.pm:mail(1255)|SUCCESS --
>>>>>> Sending
>>>>>> mail To: evq...@fiu.edu (mailto:evq...@fiu.edu), PROBLEM --
>>>>>> 1:1|image|image.pm|d6100a|rh5image-rh66-v0|admin
>>>>>> |7018|1:1|image| ---- CRITICAL ----
>>>>>> |7018|1:1|image| 2012-03-13
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:50|7018|1:1|image|image.pm:reservation_failed(385)|rh5image-rh66-
>>>>v0
>>>>>> image creation failed
>>>>>> |7018|1:1|image| ( 0) image.pm, reservation_failed (line: 385)
>>>>>> |7018|1:1|image| (-1) image.pm, process (line: 167)
>>>>>> |7018|1:1|image| (-2) vcld, make_new_child (line: 568)
>>>>>> |7018|1:1|image| (-3) vcld, main (line: 346)
>>>>>> 2012-03-13 16:03:51|7018|1:1|image|utils.pm:mail(1255)|SUCCESS --
>>>>>> Sending
>>>>>> mail To: root@localhost, VCL -- NOTICE DELAY Image Creation rh6
>>>>>> 2012-03-13 16:03:51|7018|1:1|image|utils.pm:mail(1255)|SUCCESS --
>>>>>> Sending
>>>>>> mail To: evq...@fiu.edu (mailto:evq...@fiu.edu), VCL -- NOTICE
>>>> FAILED Image Creation rh6
>>>>>> 2012-03-13 
>>>>>> 16:03:51|7018|1:1|image|utils.pm:update_request_state(1991)|request
>>>> 1
>>>>>> state updated to: maintenance, laststate to: image
>>>>>> 2012-03-13 
>>>>>> 16:03:51|7018|1:1|image|image.pm:reservation_failed(437)|request
>>>> state
>>>>>> set
>>>>>> to maintenance, laststate to image
>>>>>> 2012-03-13 
>>>>>> 
>>>> 16:03:51|7018|1:1|image|utils.pm:update_computer_state(2033)|computer
>>>>1
>>>>>> state updated to: maintenance
>>>>>> 2012-03-13 
>>>>>> 16:03:51|7018|1:1|image|image.pm:reservation_failed(445)|d6100a
>>>>>> state set to maintenance
>>>>>> 2012-03-13 
>>>>>> 16:03:51|7018|1:1|image|image.pm:reservation_failed(452)|exiting
>>>>>> 2012-03-13 16:03:51|7018|1:1|image|State.pm:DESTROY(829)|VCL::image
>>>>>> destructor called, address: 3e02078
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:51|7018|1:1|image|utils.pm:delete_computerloadlog_reservation(674
>>>>2)
>>>>>> |r
>>>>>> emoving computerloadlog entries matching loadstate = begin
>>>>>> 2012-03-13 
>>>>>> 
>>>>>> 
>>>> 
>>>>16:03:51|7018|1:1|image|utils.pm:delete_computerloadlog_reservation(678
>>>>9)
>>>>>> |d
>>>>>> eleted rows from computerloadlog for reservation id=1
>>>>>> 2012-03-13 16:03:51|7018|1:1|image|State.pm:DESTROY(848)|number of
>>>>>> database handles state process created: 3
>>>>>> 2012-03-13 16:03:51|7018|1:1|image|State.pm:DESTROY(876)|VCL::image
>>>>>> process duration: 1 seconds
>>>>>> 2012-03-13 16:03:51|2012|vcld:REAPER(718)|VCL process exited for
>>>>>> reservation 1, PID: 7018, signal: CHLD
>>>>>> 2012-03-13 16:03:51|2012|vcld:main(167)|lastcheckin time updated for
>>>>>> management node 1: 2012-03-13 16:03:51
>>>>>> 2012-03-13 16:03:56|2012|vcld:main(167)|lastcheckin time updated for
>>>>>> management node 1: 2012-03-13 16:03:56
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> On 3/13/12 3:28 PM, "Evelio Quiros" <evq...@fiu.edu
>>>> (mailto:evq...@fiu.edu)> wrote:
>>>>>> 
>>>>>>> Hello All,
>>>>>>> 
>>>>>>> Ok, I assume that I must get xCAT working before VCL is involved.
>>>>>>> So, following the instructions from the link below (thanks Andy),
>>>> I
>>>>>>> setup
>>>>>>> xCAT 
>>>>>>> on the management node and entered the information for my nodes
>>>> (dell
>>>>>>> 6100).
>>>>>>> When I issued a command to remote install (rinstall), I get this
>>>> error:
>>>>>>> 
>>>>>>> Error: Install image not found in /install/rh6.0/x86_64
>>>>>>> Error: Some nodes failed to set up install resources, aborting
>>>>>>> nodeset failure at /opt/xcat/bin/rinstall line 53.
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> So I did import the iso with the copycds command, and that seemed
>>>> to be
>>>>>>> ok.
>>>>>>> I added the nodes to the various tables (nodelist, nodehm, mac).
>>>>>>> 
>>>>>>> I setup dns and dhcp for the internal network.
>>>>>>> 
>>>>>>> ** Second Question >> did I need to setup dhcp again if dhcp was
>>>>>>> already
>>>>>>> running on this VCL management node ?
>>>>>>> 
>>>>>>> Do I need to run rinstall, or should I just try to capture an
>>>> installed
>>>>>>> image ?
>>>>>>> 
>>>>>>> I guess I need some really basic information, thanks for your
>>>> patience.
>>>>>>> 
>>>>>>> Regards,
>>>>>>> Al Quiros
>>>>>>> Florida International University
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> On 3/7/12 3:35 PM, "Andy Kurth" <andy_ku...@ncsu.edu
>>>> (mailto:andy_ku...@ncsu.edu)> wrote:
>>>>>>> 
>>>>>>>> xCAT should be installed on the management node. It doesn't
>>>> need to
>>>>>>>> be installed on other machines. There are a few different xCAT
>>>>>>>> installation instruction pages on their site. You may want to
>>>> start
>>>>>>>> with this simpler one:
>>>>>>>> 
>>>>>>>> 
>>>> 
>>>>http://sourceforge.net/apps/mediawiki/xcat/index.php?title=Basic_Instal
>>>>>>>> l_
>>>>>>>> D
>>>>>>>> HCP
>>>>>>>> 
>>>>>>>> -Andy
>>>>>>>> 
>>>>>>>> On Wed, Mar 7, 2012 at 3:16 PM, Evelio Quiros <evq...@fiu.edu
>>>> (mailto:evq...@fiu.edu)> wrote:
>>>>>>>>> Hello,
>>>>>>>>> 
>>>>>>>>> After working a while with VmWare images, we have started
>>>>>>>>> experimenting
>>>>>>>>> with
>>>>>>>>> Xcat bare metal images. To accommodate the added level of
>>>> complexity
>>>>>>>>> with
>>>>>>>>> Xcat, I created a separate development environment with VCL
>>>> and some
>>>>>>>>> dell
>>>>>>>>> 6100 high density nodes. I have installed RHEL 6.1 with Xcat
>>>> on all
>>>>>>>>> the
>>>>>>>>> nodes. Following the instructions on the doc page, I installed
>>>>>>>>> partimage to
>>>>>>>>> the xcat installation. I think its correct, except that these
>>>> are not
>>>>>>>>> IBM
>>>>>>>>> blades, so I am unsure how to build a stateless image on this
>>>>>>>>> hardware.
>>>>>>>>> Just
>>>>>>>>> attempting to capture the image "as-is" failed, and the error
>>>>>>>>> messages
>>>>>>>>> are
>>>>>>>>> below. Is there any more documentation on this process, and 
>>>> how to
>>>>>>>>> make
>>>>>>>>> Xcat
>>>>>>>>> work with VCL? Being new to Xcat, I guess that I am missing 
>>>> some
>>>>>>>>> background
>>>>>>>>> material on what is supposed to happen here. For example, the 
>>>> error
>>>>>>>>> log
>>>>>>>>> states that /opt/xcat does not exist, but it does exist on 
>>>> the node I
>>>>>>>>> was
>>>>>>>>> attempting to capture. Does Xcat need to be on the management 
>>>> node
>>>>>>>>> too
>>>>>>>>> ?
>>>>>>>>> 
>>>>>>>>> The information I am using is located at:
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> http://sourceforge.net/apps/mediawiki/xcat/index.php?title=Setting_Up_
>>>>>>>>> a_
>>>>>>>>> L
>>>>>>>>> inux_xCAT_Mgmt_Node
>>>>>>>>> 
>>>>>>>>> And
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> https://cwiki.apache.org/VCL/adding-support-for-partimage-and-partimag
>>>>>>>>> e-
>>>>>>>>> n
>>>>>>>>> g-to-xcat-2x-unofficial.html
>>>>>>>>> 
>>>>>>>>> Any other information available ?
>>>>>>>>> 
>>>>>>>>> Thanks,
>>>>>>>>> Al Quiros
>>>>>>>>> Florida International University
>>>>>>>>> 
>>>>>>>>> **********************************************
>>>>>>>>> 
>>>>>>>>> Error message from my attempt at capturing the image below:
>>>>>>>>> 
>>>>>>>>> VCL::image object could not be created and initialized
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> ----------------------------------------------------------------------
>>>>>>>>> --
>>>>>>>>> time: 2012-03-07 14:49:31
>>>>>>>>> caller: vcld:make_new_child(571)
>>>>>>>>> ( 0) vcld, make_new_child (line: 571)
>>>>>>>>> (-1) vcld, main (line: 346)
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> ----------------------------------------------------------------------
>>>>>>>>> --
>>>>>>>>> management node: vcldev01.p.fiu.edu
>>>>>>>>> reservation PID: 12372
>>>>>>>>> parent vcld PID: 2044
>>>>>>>>> 
>>>>>>>>> request ID: 1
>>>>>>>>> reservation ID: 1
>>>>>>>>> request state/laststate: image/image
>>>>>>>>> request start time: 2012-03-07 14:49:30
>>>>>>>>> request end time: 2012-03-07 15:49:30
>>>>>>>>> for imaging: no
>>>>>>>>> log ID: none
>>>>>>>>> 
>>>>>>>>> computer: 6100a
>>>>>>>>> computer id: 1
>>>>>>>>> computer type: blade
>>>>>>>>> computer eth0 MAC address: <undefined>
>>>>>>>>> computer eth1 MAC address: <undefined>
>>>>>>>>> computer private IP address: 10.0.0.25
>>>>>>>>> computer public IP address: 10.106.128.14
>>>>>>>>> computer in block allocation: no
>>>>>>>>> provisioning module: VCL::Module::Provisioning::xCAT2
>>>>>>>>> 
>>>>>>>>> image: rh5image-rh6xcat5-v0
>>>>>>>>> image display name: rh6xcat
>>>>>>>>> image ID: 5
>>>>>>>>> image revision ID: 5
>>>>>>>>> image size: 1450 MB
>>>>>>>>> use Sysprep: yes
>>>>>>>>> root access: yes
>>>>>>>>> image owner ID: 1
>>>>>>>>> image owner affiliation: Local
>>>>>>>>> image revision date created: 2012-03-07 14:49:29
>>>>>>>>> image revision production: yes
>>>>>>>>> OS module: VCL::Module::OS::Linux
>>>>>>>>> 
>>>>>>>>> user: admin
>>>>>>>>> user name: vcl admin
>>>>>>>>> user ID: 1
>>>>>>>>> user affiliation: Local
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> ----------------------------------------------------------------------
>>>>>>>>> --
>>>>>>>>> RECENT LOG ENTRIES FOR THIS PROCESS:
>>>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 
>>>> 'id' key
>>>>>>>>> for
>>>>>>>>> VCL::image object from arguments
>>>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 
>>>> 'PID' key
>>>>>>>>> for
>>>>>>>>> VCL::image object from arguments
>>>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 
>>>> 'DURATION'
>>>>>>>>> key
>>>>>>>>> for VCL::image object from arguments
>>>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 
>>>> 'PPID' key
>>>>>>>>> for
>>>>>>>>> VCL::image object from arguments
>>>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set
>>>>>>>>> 'datemodified'
>>>>>>>>> key for VCL::image object from arguments
>>>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set
>>>>>>>>> 'RESERVATIONCOUNT' key for VCL::image object from arguments
>>>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 
>>>> 'end' key
>>>>>>>>> for
>>>>>>>>> VCL::image object from arguments
>>>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 
>>>> 'stateid'
>>>>>>>>> key for
>>>>>>>>> VCL::image object from arguments
>>>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set
>>>>>>>>> 'PARENTIMAGE' key
>>>>>>>>> for VCL::image object from arguments
>>>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set
>>>>>>>>> 'checkuser'
>>>>>>>>> key
>>>>>>>>> for VCL::image object from arguments
>>>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 
>>>> 'preload'
>>>>>>>>> key for
>>>>>>>>> VCL::image object from arguments
>>>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set
>>>>>>>>> 'NOTICEINTERVAL'
>>>>>>>>> key for VCL::image object from arguments
>>>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 
>>>> 'start'
>>>>>>>>> key
>>>>>>>>> for
>>>>>>>>> VCL::image object from arguments
>>>>>>>>> 2012-03-07 14:49:31|12372|1:1|image|Module.pm:new(172)|set 
>>>> 'logid' 
>>>>>>>>> key
>>>>>>>>> for
>>>>>>>>> VCL::image object from arguments
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(361)|VCL::Modul
>>>>>>>>> e:
>>>>>>>>> :
>>>>>>>>> OS::Linux::ManagementNode
>>>>>>>>> module loaded
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux::Ma
>>>>>>>>> na
>>>>>>>>> g
>>>>>>>>> ementNode
>>>>>>>>> object created for image <not set>, address: 2417400
>>>>>>>>> 2012-03-07 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data
>>>>>>>>> structure updated:
>>>>>>>>> $self->request_data->{reservation}{0}{computer}{hostname}
>>>>>>>>> |12372|1:1|image| computer_hostname = vcldev01.p.fiu.edu
>>>>>>>>> 2012-03-07 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data
>>>>>>>>> structure updated:
>>>>>>>>> $self->request_data->{reservation}{0}{computer}{NODENAME}
>>>>>>>>> |12372|1:1|image| computer_node_name = vcldev01
>>>>>>>>> 2012-03-07 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data
>>>>>>>>> structure updated:
>>>>>>>>> $self->request_data->{reservation}{0}{computer}{SHORTNAME}
>>>>>>>>> |12372|1:1|image| computer_short_name = vcldev01
>>>>>>>>> 2012-03-07 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|DataStructure.pm:_automethod(834)|data
>>>>>>>>> structure updated:
>>>>>>>>> $self->request_data->{reservation}{0}{computer}{IPaddress}
>>>>>>>>> |12372|1:1|image| computer_ip_address = 10.106.128.12
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(366)|VCL::Modul
>>>>>>>>> e:
>>>>>>>>> :
>>>>>>>>> OS::Linux::ManagementNode
>>>>>>>>> OS object created, address: 2417400
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|Module.pm:new(192)|VCL::image
>>>>>>>>> object
>>>>>>>>> created for state image, address: 223a460
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|State.pm:initialize(86)|obtained 
>>>>>>>>> a
>>>>>>>>> database handle for this state process, stored as $ENV{dbh}
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|State.pm:check_image_os(762)|no
>>>>>>>>> corrections need to be made to image OS: rh5image
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|DataStructure.pm:is_parent_reservation(991)|r
>>>>>>>>> et
>>>>>>>>> u
>>>>>>>>> rning
>>>>>>>>> true: parent reservation ID for this request: 1
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7098)|reservatio
>>>>>>>>> n
>>>>>>>>> count: 1
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7117)|PARENTIMAG
>>>>>>>>> E:
>>>>>>>>> 1
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7118)|SUBIMAGE: 
>>>>>>>>> 0
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|utils.pm:rename_vcld_process(7136)|renamed
>>>>>>>>> process
>>>>>>>>> to 'vcld 1:1 image 6100a rh5image-rh6xcat5-v0 admin'
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|DataStructure.pm:is_parent_reservation(991)|r
>>>>>>>>> et
>>>>>>>>> u
>>>>>>>>> rning
>>>>>>>>> true: parent reservation ID for this request: 1
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|DataStructure.pm:is_parent_reservation(991)|r
>>>>>>>>> et
>>>>>>>>> u
>>>>>>>>> rning
>>>>>>>>> true: parent reservation ID for this request: 1
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|Module.pm:create_os_object(298)|VCL::Module::
>>>>>>>>> OS
>>>>>>>>> :
>>>>>>>>> :Linux
>>>>>>>>> module loaded
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(335)|management
>>>>>>>>> node
>>>>>>>>> OS object has already been created, address: 2417400, 
>>>> returning 1
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|Module.pm:new(196)|VCL::Module::OS::Linux
>>>>>>>>> object
>>>>>>>>> created for image rh5image-rh6xcat5-v0, address: 241a3b0
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|Module.pm:create_os_object(304)|VCL::Module::
>>>>>>>>> OS
>>>>>>>>> :
>>>>>>>>> :Linux
>>>>>>>>> OS object created for rh5image-rh6xcat5-v0, address: 241a3b0
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|xCAT.pm:initialize(110)|XCATROOT
>>>>>>>>> environment variable is not set, using /opt/xcat
>>>>>>>>> |12372|1:1|image| ---- WARNING ----
>>>>>>>>> |12372|1:1|image| 2012-03-07
>>>>>>>>> 14:49:31|12372|1:1|image|xCAT.pm:initialize(119)|unable to 
>>>> initialize
>>>>>>>>> xCAT
>>>>>>>>> module, /opt/xcat directory does not exist
>>>>>>>>> |12372|1:1|image| ( 0) xCAT.pm, initialize (line: 119)
>>>>>>>>> |12372|1:1|image| (-1) xCAT.pm, (eval) (line: 3239)
>>>>>>>>> |12372|1:1|image| (-2) (eval 156), (eval) (line: 3)
>>>>>>>>> |12372|1:1|image| (-3) base.pm, import (line: 91)
>>>>>>>>> |12372|1:1|image| (-4) xCAT2.pm, BEGIN (line: 47)
>>>>>>>>> |12372|1:1|image| (-5) xCAT.pm, (eval) (line: 0)
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|xCAT2.pm:initialize(110)|XCATROOT
>>>>>>>>> environment variable is not set, using /opt/xcat
>>>>>>>>> |12372|1:1|image| ---- WARNING ----
>>>>>>>>> |12372|1:1|image| 2012-03-07
>>>>>>>>> 14:49:31|12372|1:1|image|xCAT2.pm:initialize(119)|unable to 
>>>>>>>>> initialize
>>>>>>>>> xCAT
>>>>>>>>> module, /opt/xcat directory does not exist
>>>>>>>>> |12372|1:1|image| ( 0) xCAT2.pm, initialize (line: 119)
>>>>>>>>> |12372|1:1|image| (-1) xCAT2.pm, (eval) (line: 2178)
>>>>>>>>> |12372|1:1|image| (-2) (eval 155), BEGIN (line: 2)
>>>>>>>>> |12372|1:1|image| (-3) xCAT2.pm, (eval) (line: 0)
>>>>>>>>> |12372|1:1|image| (-4) xCAT2.pm, (eval) (line: 0)
>>>>>>>>> |12372|1:1|image| (-5) Module.pm, create_provisioning_object 
>>>> (line:
>>>>>>>>> 415)
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|Module.pm:create_provisioning_object(420)|VCL
>>>>>>>>> ::
>>>>>>>>> M
>>>>>>>>> odule::Provisioning::xCAT2
>>>>>>>>> module loaded
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|Module.pm:create_mn_os_object(335)|management
>>>>>>>>> node
>>>>>>>>> OS object has already been created, address: 2417400, 
>>>> returning 1
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|Module.pm:new(200)|VCL::Module::Provisioning:
>>>>>>>>> :x
>>>>>>>>> C
>>>>>>>>> AT2
>>>>>>>>> object created for computer 6100a, address: 241a548
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|xCAT2.pm:initialize(110)|XCATROOT
>>>>>>>>> environment variable is not set, using /opt/xcat
>>>>>>>>> |12372|1:1|image| ---- WARNING ----
>>>>>>>>> |12372|1:1|image| 2012-03-07
>>>>>>>>> 14:49:31|12372|1:1|image|xCAT2.pm:initialize(119)|unable to 
>>>>>>>>> initialize
>>>>>>>>> xCAT
>>>>>>>>> module, /opt/xcat directory does not exist
>>>>>>>>> |12372|1:1|image| ( 0) xCAT2.pm, initialize (line: 119)
>>>>>>>>> |12372|1:1|image| (-1) Module.pm, new (line: 207)
>>>>>>>>> |12372|1:1|image| (-2) Module.pm, create_provisioning_object 
>>>> (line: 
>>>>>>>>> 423)
>>>>>>>>> |12372|1:1|image| (-3) State.pm, initialize (line: 117)
>>>>>>>>> |12372|1:1|image| (-4) Module.pm, new (line: 207)
>>>>>>>>> |12372|1:1|image| (-5) vcld, make_new_child (line: 564)
>>>>>>>>> |12372|1:1|image| ---- WARNING ----
>>>>>>>>> |12372|1:1|image| 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|Module.pm:create_provisioning_object(431)|pro
>>>>>>>>> vi
>>>>>>>>> s
>>>>>>>>> ioning
>>>>>>>>> object could not be created, returning 0
>>>>>>>>> |12372|1:1|image| ( 0) Module.pm, create_provisioning_object 
>>>> (line: 
>>>>>>>>> 431)
>>>>>>>>> |12372|1:1|image| (-1) State.pm, initialize (line: 117)
>>>>>>>>> |12372|1:1|image| (-2) Module.pm, new (line: 207)
>>>>>>>>> |12372|1:1|image| (-3) vcld, make_new_child (line: 564)
>>>>>>>>> |12372|1:1|image| (-4) vcld, main (line: 346)
>>>>>>>>> |12372|1:1|image| ---- WARNING ----
>>>>>>>>> |12372|1:1|image| 2012-03-07
>>>>>>>>> 14:49:31|12372|1:1|image|State.pm:initialize(118)|failed to 
>>>> create
>>>>>>>>> provisioning object
>>>>>>>>> |12372|1:1|image| ( 0) State.pm, initialize (line: 118)
>>>>>>>>> |12372|1:1|image| (-1) Module.pm, new (line: 207)
>>>>>>>>> |12372|1:1|image| (-2) vcld, make_new_child (line: 564)
>>>>>>>>> |12372|1:1|image| (-3) vcld, main (line: 346)
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|State.pm:DESTROY(829)|VCL::image
>>>>>>>>> destructor called, address: 223a460
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|utils.pm:delete_computerloadlog_reservation(6
>>>>>>>>> 74
>>>>>>>>> 2
>>>>>>>>> )|removing
>>>>>>>>> computerloadlog entries matching loadstate = begin
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|utils.pm:delete_computerloadlog_reservation(6
>>>>>>>>> 78
>>>>>>>>> 9
>>>>>>>>> )|deleted
>>>>>>>>> rows from computerloadlog for reservation id=1
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|State.pm:DESTROY(848)|number of
>>>>>>>>> database
>>>>>>>>> handles state process created: 1
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|State.pm:DESTROY(876)|VCL::image
>>>>>>>>> process
>>>>>>>>> duration: 0 seconds
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|DataStructure.pm:get_computer_private_ip_addr
>>>>>>>>> es
>>>>>>>>> s
>>>>>>>>> (1581)|attempting
>>>>>>>>> to retrieve private IP address for computer: 6100a
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|DataStructure.pm:get_computer_private_ip_addr
>>>>>>>>> es
>>>>>>>>> s
>>>>>>>>> (1585)|retrieved
>>>>>>>>> contents of /etc/hosts on this management node, contains 9 
>>>> lines
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|DataStructure.pm:get_computer_private_ip_addr
>>>>>>>>> es
>>>>>>>>> s
>>>>>>>>> (1645)|returning
>>>>>>>>> IP address from /etc/hosts file: 10.0.0.25
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2703)|unable 
>>>>>>>>> to
>>>>>>>>> use
>>>>>>>>> database handle stored in $ENV{dbh}
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2760)|database
>>>>>>>>> handle
>>>>>>>>> stored in $ENV{dbh}
>>>>>>>>> 2012-03-07 
>>>>>>>>> 14:49:31|12372|1:1|image|utils.pm:is_inblockrequest(6163)|zero
>>>>>>>>> rows were returned from database select
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|DataStructure.pm:get_image_affiliation_name(2
>>>>>>>>> 03
>>>>>>>>> 5
>>>>>>>>> )|image
>>>>>>>>> owner id: 1
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2709)|database
>>>>>>>>> requested (information_schema) does not match handle stored 
>>>> in 
>>>>>>>>> $ENV{dbh}
>>>>>>>>> (vcl:localhost)
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2760)|database
>>>>>>>>> handle
>>>>>>>>> stored in $ENV{dbh}
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|DataStructure.pm:retrieve_user_data(1352)|att
>>>>>>>>> em
>>>>>>>>> p
>>>>>>>>> ting
>>>>>>>>> to retrieve and store data for user: user.id = '1'
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2709)|database
>>>>>>>>> requested (vcl) does not match handle stored in $ENV{dbh}
>>>>>>>>> (information_schema:localhost)
>>>>>>>>> 2012-03-07 
>>>> 14:49:31|12372|1:1|image|utils.pm:getnewdbh(2760)|database
>>>>>>>>> handle
>>>>>>>>> stored in $ENV{dbh}
>>>>>>>>> 2012-03-07
>>>>>>>>> 
>>>>>>>>> 
>>>> 14:49:31|12372|1:1|image|DataStructure.pm:retrieve_user_data(1415)|dat
>>>>>>>>> a
>>>>>>>>> has
>>>>>>>>> been retrieved for user: admin (id: 1)
>>>>>>>> 
>>>>>>> 
>>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> --
>>>>> Dmitri Chebotarov
>>>>> Virtual Computing Lab Systems Engineer, TSD - Ent Servers & Messaging
>>>>> 223 Aquia Building, Ffx, MSN: 1B5
>>>>> Phone: (703) 993-6175
>>>>> Fax: (703) 993-3404
>>>> 
>>> 
>>> 
>>> 
>> 
>
>--
>Dmitri Chebotarov
>Virtual Computing Lab Systems Engineer, TSD - Ent Servers & Messaging
>223 Aquia Building, Ffx, MSN: 1B5
>Phone: (703) 993-6175
>Fax: (703) 993-3404
>
>
>

Reply via email to