Hello Ilariu, I didn't think softdevice actually supported XVMC - I can't see any options for it in the Makefile to tweak. Only XV/DFB/VIDIX etc. The only output method I have compiled in is XV. (this is CVS checkout of softdevice).
A quick grep through the source for 'xvmc' doesn't match anything either? Thanks, Chris On Wed, Aug 09, 2006 at 06:07:20PM +0100, Ilariu Raducan wrote: > Chris, > > From Your Xorg.0.log: > > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > > Notice XVideo-MotionCompensation (XVMC) > > That doesn't mean is used by the application, only that exists (which is > good) > If the application is built with it enabled then you may have problems. > > I see you have a NVIDIA card and XVMC is the most probable issue. > > Try to make sure softdevice is not compiled with XVMC enabled until this > extension is fixed. > > Regards. > Ilariu > > On 8/7/06, Chris Elsworth <[EMAIL PROTECTED]> wrote: > > Ilariu, > > Hm I don't think XvMC is enabled. It would say so in Xorg.0.log if it > was, right? A complete copy of my most recent X startup is here > http://spork.qfe3.net/~chris/vdr/Xorg.0.log > > No mention of XvMC that I can see, so I presume it's off. Config is: > http://spork.qfe3.net/~chris/vdr/xorg.conf > all fairly simple and almost the defaults. > > Chris > > On Mon, Aug 07, 2006 at 03:49:46PM +0100, Ilariu Raducan wrote: > > This also happened to me with vdr-xine if I tried to use xvmc video > output > > with NVIDIA. > > Maybe you need to check if you have xvmc enabled. > > > > On 8/7/06, Stefan Lucke <[EMAIL PROTECTED]> wrote: > > > > On Montag 07 August 2006 05:20, Chris Elsworth wrote: > > > On Sun, Aug 06, 2006 at 06:45:55PM -0700, CR wrote: > > > > Hi Chris, > > > > > > > > Chris Elsworth wrote: > > > > > > > > > Yes, I read the old mails and found the hue of 0 or 100 > > suggestion, > > > > > and tried it (see original mail I posted) and it didn't > work. I > > just > > > > > tried it again with softdevice from cvs to double check and > it > > didn't > > > > > have any effect, so maybe I'm running into a slightly > different > > > > > problem. > > > > > > > > > > Do you have any suggestions about how I might try to debug > it? > > > > > > > > Can you take a look at: > > > > > > > > http://www.flickr.com/photos/[EMAIL PROTECTED] > > > > @CR, I've seen this but I don't know whats the problem with your > setup > > or > > why our osd drawing is wrong in combination with nvidia cards. > > At which color depth is your X server running ? > > > > > > > > > > and let me know if your OSD looks like > > "softdevice_wrongoverlay1_software" > > > > or "softdevice_wrongoverlay_software" ? > > > > > > > > I think the problem lies in the code that alpha blends the > OSD with > > the > > > > video image. Changing the HUE setting for me had no effect > > either. I > > > > notice the OSD becomes "strange" once any video is > playing. Until > > then > > > > the OSD looks fine... > > > > > > Hello, > > > > > > Hmm, mine look different from all your examples. > > > > > > This is the pink, incorrect display: > > > http://spork.qfe3.net/~chris/vdr/snapshot4.png > > > > > > When changing to this channel, vdr says: > > > Aug 7 04:12:57 media vdr:  [VideoOut]: 720x576 [90,0 > 540x576] > > -> 1024x768 [128,0 768x768] > > > > > > > > > This is a correct display: > > > http://spork.qfe3.net/~chris/vdr/snapshot5.png > > > > > > And when changing to this channel, vdr says: > > > Aug 7 04:13:29 media vdr:  [VideoOut]: 720x576 [0,0 > 720x576] -> > > 1024x768 [0,0 1024x768] > > > > > > > > > Another incorrect: > > > http://spork.qfe3.net/~chris/vdr/snapshot6.png > > > > > > And the log: > > > Aug 7 04:14:35 media vdr:  [VideoOut]: 704x576 [0,0 > 704x576] -> > > 1024x768 [0,0 1024x768] > > > > > > > > > Screenshots were made with ksnapshot. The only correlation I > can make > > > so far is that lower resolutions seem to present the problem? > > > > Can you try that without any skin / osd related plugin and with > an > > unpatched > > (vanilla) vdr ? > > What are your osd postions and size specs (setup -> osd) ? > > > > -- > > Stefan Lucke > > > > _______________________________________________ > > vdr mailing list > > firstname.lastname@example.org > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > > _______________________________________________ > > vdr mailing list > > email@example.com > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > -- > Chris > > _______________________________________________ > vdr mailing list > firstname.lastname@example.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > _______________________________________________ > vdr mailing list > email@example.com > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr -- Chris _______________________________________________ vdr mailing list firstname.lastname@example.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr