Have you made any progress on this?
I've been waiting for someone to respond - if you can get the card working,
I'd consider getting one
----- Original Message -----
From: "mlists" <[EMAIL PROTECTED]>
To: "VDR Mailing List" <email@example.com>
Sent: Tuesday, August 15, 2006 5:51 AM
Subject: [vdr] VDR with ATSC card -- need help
> Hi there,
> I have an Air2PC Skystar 2 card and a Twinhan 1020a. I've been using
> the Twinhan for several years now with VDR and am quite happy with how
> its working.
> I recently added the Air2PC card. Both are seen by the OS:
> 00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video
> Capture (rev 11)
> 00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
> (rev 11)
> 00:0c.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII
> DVB chip / Technisat SkyStar2 DVB card (rev 02)
> The twinhan is under /dev/dvb/adapter0 and the Air2PC is
> under /dev/dvb/adapter1.
> VDR verion 1.4.1-3
> I confirmed in my sources.conf that I have an entry for C Cable. Would
> that be what to use for ATSC Cable (North America)?
> This is the single channel line I'm using to try and get this working:
> Details are:
> Freq (Mhz) 729.0
> Video PID 21
> Audio PID 24
> CA 1 (for card number 1? -- does this start at 0? I've tried different
> numbers here)
> SID 6 (Same as channel I believe)
> Every attempt to change to this channel results in a "Channel not
> Any suggestions??
> Thanks in advance!
> vdr mailing list
vdr mailing list