On Fri, Jan 26, 2007 at 08:44:50PM +0200, Kartsa wrote: > Marko Mäkelä kirjoitti: > >On Wed, Jan 17, 2007 at 10:16:55PM +0200, Kartsa wrote: > > > >>>I would suspect that you haven't set up TCP/IP networking before > >>>starting vdr for the first time. > >>> > >>> > >>I did make a working linux box with all updates before even installing > >>vdr.
I meant that vdr probably should be started later in the boot process than TCP/IP networking. > I actually fixed this now by not letting vdr start by the system init > but added "/etc/init.d/vdr start" in rc.local. Maybe the 550 PIII is > just too slow in an environment where is matrox G400 and DirectFB :) Possibly. I'm using softdevice-dfb on Matrox G450, but the processor is a 900 MHz Celeron. I found the VGA output to be 10% or 20% less CPU intensive than the TV output, which I am currently using. Marko _______________________________________________ vdr mailing list firstname.lastname@example.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr