Hi,
serge pecher schrieb:
>> Jan 27 09:17:32 pccave vdr: [13657] switching to channel 1
>> Jan 27 09:17:32 pccave vdr: [13662] set DVB-S
>> Jan 27 09:17:41 pccave vdr: [13662] frontend 0 timed out while tuning to
>> channel 1, tp 110832
>
> This one looks OK too. DVB-S channels shall be tuned on DVB-S
> capable devices only, and as a last resort, on DVB-S2 devices.
> But it looks like channel 1 is on ASTRA and therefore you'll get
> a tuning timeout on device 1 (= /dev/dvb/adapter0; frontend 0 =
> /dev/dvb/adapter0/frontend0) as it is connected to HOTBIRD.
>
> VDR currently assumes that all DVB-S(2) devices are able to
> deliver all DVB-S(2) channels (actually, it's a bit more
> complex). You'll need a special channel setup to bind channels to
> certain devices.
>
> [serge pecher] I presume that this is what I have to do, because I would
> like to look at the ASTRA channels with the DVB-S2 device.
> How can I achieve that ?
See
man 5 vdr
and have a look at "Conditional access":
> 0001...000F explicitly requires the device with the given number
Bye.
--
Dipl.-Inform. (FH) Reinhard Nissl
mailto:[EMAIL PROTECTED]
_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
