> I had a 1.5.13 running for a while on a nexus FF.
> I did install a second card, S2-3200, together with the multiproto driver

do you use the latest multiproto's version ?

> and vdr 1.7.0, without patches at this moment, because I am not interested
> in HD at this time. I am just looking to have 2 cards working to be able
> to stream on several vdr clients and use the output of my FF card. The S2
> card is on astra, and the FF on hotbird
> I started with a  clean  vdrconf directory, and with a channel.conf with
> only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels,
> but it did only for a few.

> After starting the first time, it scanned about 10 new channels and stops
> there. In the DVB menu, update stands on  add new transponder 

how did you start the scanning  on vdr ? 

> I did try with an other channel.conf. I can see every FTA channel on
> hotbird, but I have a black screen on astra (nothing as  channel not
> available ).
> The log does nt learn me something either. In fact the log is flooded by
> kernel messages about stb6100 that get_frequence and bandwith. The
> frequence are always the same.
> -why is the  autoscan  not working ? Do I need some  transponder file  ?

there's reelchannelscan plugin 0.4.1 It works with dvb-s channels on vdr170 , 
not with dvb-s2.

> -how can I check the signal on my S2-3200 card ?

femon-plugin will helpto you

> -how can I reduce the logs from stb6100 ?

have a look on verbose option for stb6100 module - modinfo stb6100

> -do I need to apply a concurrent recording patch to be able to stream 2 or
> more signals ?

which patch do you mean ?


vdr mailing list

Reply via email to