i had the same problem.
the solution is to resize the video to one of the following resolutions:
352 x 288
480 × 576
544 × 576
take the one which is nearest to the original resolution of your stream.
these are resolutions which the hardware scaler of the FF accepts.
Van: [EMAIL PROTECTED] [EMAIL PROTECTED] namens Hawes, Mark [EMAIL PROTECTED]
Verzonden: vrijdag 22 augustus 2008 13:05
Onderwerp: [vdr] iptv plugin - hardware scaling
I’m using iptv 0.2.1 with vdr 0.1.7 to view NASA TV on a technotrend ff card.
The displayed picture occupies only the top left ¼ of the screen. My objective
is to get it full screen.
I have tried scaling it in the iptvscreen.sh script in the vlc call but this
asks too much of the processor and things get very jerky.
I believe that the ff card is capable of scaling in hardware. Any idea how I
can get it to do this for an iptv stream?
This is an email from Fujitsu Australia Limited, ABN 19 001 011 427. It is
confidential to the ordinary user of the email address to which it was
addressed and may contain copyright and/or legally privileged information. No
one else may read, print, store, copy or forward all or any of it or its
attachments. If you receive this email in error, please return to sender. Thank
If you do not wish to receive commercial email messages from Fujitsu Australia
Limited, please email [EMAIL PROTECTED]
Op deze e-mail zijn de volgende voorwaarden van toepassing:
The above disclaimer applies to this e-mail message.
vdr mailing list