Hello All,

Today I finished the patch for DVB-S, DVB-S2, DVB-T and DVB-C support using 
S2API in combination with VDR 1.7.0. I've tested my code on DVB-S, DVB-S2 and 
DVB-T transports and they were all successful. DVB-C is untested (don't have a 
DVB-C option where I live) but it should work in *THEORY* ;)

DVB-S and DVB-S2 were tested on a Hauppauge WinTV-NOVA-HD-S2 card. DVB-T was 
tested on a Gigabyte GT-U7000-RH USB device. I used the latest v4l pull and 
viewing was very stable with both DVB devices. I also didn't had any problems 
any more when switching between DVB-S(2) and DVB-T, but it can be that this 
patch will *NOT* work correctly on MFE DVB devices like the HVR-3000 or 
HVR-4000 (I had to do some hacking because strangely, DVB-T transports were 
offered to my DVB-S DVB device). Since I can't test this, I hope others can 
tell me if it works or not.

Enclosed are two patches. The clean patch is for a clean VDR 1.7.0 source tree 
patched with Reinhard's 
 patch. The patched patch is for those who have used Edgar (gimli) Hucek's 
patch for VDR 1.7.0. In theory it should also work with my last send patch.

The patch itself is still based upon Igor M. Liplianin's S2API patch. Many 
thanks to Igor, Darron Broad and Edgar (gimli) Hucek for the help and 
suggestions with the previous and current patch. Again, any feedback on this 
patch is highly appreciated!


Niels Wagenaar

Attachment: vdr-1.7.0-s2api-04102008-clean.patch.gz
Description: Binary data

Attachment: vdr-1.7.0-s2api-04102008-patched.patch.gz
Description: Binary data

vdr mailing list

Reply via email to