On Mon, 24 Nov 2008 21:41:54 +0100, Nicolas Huillard wrote
> Alex Betis a écrit :
> > On Mon, Nov 24, 2008 at 3:24 PM, Nicolas Huillard > > Guys,
> > How about putting the system in suspend mode instead of powering it off and
> > on again? Should take few seconds.
> Suspend to RAM as always been a pain in my various trials, but this
> is a much simpler goal than a complete laptop. Virtually no device
> to take down/bring up on a pure streamdev client. NFS handles must
> just survive the long delay, but it should be OK.
7 seconds until I get a picture on my EPIA 6000. And this is still pretty
long, as I need to upload DXR3 firmware first, then start VDR.
> This also works around an annoying bug in the (non-upgraded) EPIA
> BIOS: the PXE LAN boot does not always initialize the network
> interface after a shutdown. One have to unplug power to boot
> correctly next time...
Current via-rhine drivers have a module option to fix this: via-rhine.avoid_D3=1
For older kernes there's a patch: http://lkml.org/lkml/2004/9/17/242
vdr mailing list