On Thursday 15 January 2009 07:35:15 Harald Milz wrote:
> Hi,
> at the moment I use 2 satellites (Astra1 @ 19.2E, Hotbird @ 13.0E) with 3
> budget cards and cables (2x Astra from a quad LNB, 1x Hotbird from a
> single) with the capabilities patch. In the future I may need to cut down
> the 3 to 2 cards / cables. I know I will need to replace the quad LNB by a
> quattro, or maybe both LNBs by two duals. The question is, how can I use a
> 3/2 multiswitch, and how will VDR know where the 13.0E programs are, or the
> 19.2E, respectively.

I do not think that it is easy to setup with a 3/2 multiswitch.

I have found a disec multiswitch for two twin LNBs to two receivers at
Conrad Electronics (article no. 257281) for 52 EUR.  I think something
like that should work well. There are other multiswitches for more receivers
available, but they are also more expensive, of course ;-)

Kind regards,

vdr mailing list

Reply via email to