On Fri, 2010-02-05 at 08:47 +0000, Newsy Paper wrote:
> Why not using rotor plugin?
> It's working ok even with 1.7.11, but there's a bug with my s2-3200. I
> don't know if it's a HW or SW bug, but if I am on a High Band
> transponder (22khz is active) the rotor doesn't move, so I have to
> switch to a low band transponder first. Workround would be to disable
> 22khz in the plugin automatically then rotate und reactive it again
> (if it has been active before). But I don't know how to implement that
This is why originally made the patch (thanks for rotor plugin author
for lot's of useful code). I got fed up to unreliable operation and
messing up of channels.conf with similar frequencies from other
positions. As an example I don't need gotox command repeat any more.
Even with gotox repeat I got large error probability.
For a vdr plugin I could not find a way to merge the operations properly
to other diseqc operations while ensuring compliance with diseqc spec.
I'd separate rotor plugin to a generic channel scan plugin, that it is
Retrieve (and store position) system of elder motors should be in the
core vdr dvb-s support as well IMHO. The same timing hazard is
potentially there too unless retrieve position is handwritten to
> --- Bikalexander <bikalexan...@gmail.com> schrieb am Fr, 5.2.2010:
> > Von: Bikalexander <bikalexan...@gmail.com>
> > Betreff: [vdr] Fwd: GOTOX patch for 1.7.5
> > An: firstname.lastname@example.org
> > Datum: Freitag, 5. Februar 2010, 2:17
> > Thanks for the link, now I've finally
> > got the correct version:).
> > I am using 2 DVB cards, it can be adjusted in some way that
> > certain
> > device is being addressed?
> > 2010/2/4 Ales Jurik <aju...@quick.cz>:
> > > On Thursday 04 of February 2010, Bikalexander wrote:
> > >> Even with last patch does not do it:
> > >>
> > > Which exactly version of patch did you use? What was
> > the output of patching?
> > > Was there any rejects? Did you try to patch vanilla
> > version of vdr? Without
> > > these basic information people could only guess what
> > happened in your vdr.
> > >
> > > For me now it works without problem (latest patch is
> > in
> > > http://www.linuxtv.org/pipermail/vdr/2010-January/022017.html).
> > >
> > > Ales
> > >
> > _______________________________________________
> > vdr mailing list
> > email@example.com
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
> Do You Yahoo!?
> Sie sind Spam leid? Yahoo! Mail verfügt über einen herausragenden Schutz
> gegen Massenmails.
> vdr mailing list
vdr mailing list