I bought a Reddo dvb-c usb card last week and wanted to make it a backup
card without a risk of it accidentally tuning into QAM256 channel and
spitting out garbage. It seems to be quite good value for money in Finland
if you want dvb-c usb card and don't need QAM256.

I followed this conversation through but as it seems there is no support for
not using QAM256 in the driver nor in the VDR I decided to make a short
patch for VDR.

**WARNING** This patch was written in quite short time and it's not a good
example of clean code, but it works (for me) and will be useful for anyone
with Reddo card having QAM256 channels. It will be obsolete if/when QAM256
disable is done "the right way" (by asking the driver), but until then...
Please try it out and let me know if there is a problem with it.

The patch is available here:



2009/10/29 Petri Helin <phe...@googlemail.com>

> Hi,
> I have an USB DVB-C card (Reddo dvb-c, actually a relabelled Tongshi box),
> which works very well with the current Linux driver excluding channels with
> QAM-256 modulation. Would it be easy to check FE_CAN_QAM_256 in vdr before
> trying to use a device to tune to a particular channel? In such a case I
> could deactivate FE_CAN_QAM_256 in the drivers. I am using VDR 1.7.9, if it
> makes a difference.
> Of course at the moment the proper solution would be to modify the
> channels.conf to se a preselected card to tune to a particular channel, but
> in this case there are two drawbacks with it. 1) I have more than one card
> that I can use for QAM-256 channels and would like to use them all, and 2)
> channels woth QAM-256 are also encrypted and I have yet to figure out how to
> set both the CA code and the number of the card in the "Conditional access"
> parameter in the channels.conf.
> Actually now that I think of it... How about separating the explicit card
> selection and conditional access by introducing a new paremeter in the
> channels.conf that could be used to preselect the card(s) that can tune to
> the selected channel?
> -Petri
> _______________________________________________
> vdr mailing list
> vdr@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list

Reply via email to