On 12-01-03 05:54 PM, Damien Bally wrote:

I got a BCM70015 card working with vdr-xineliboutput by using the crystalhd plugin for xine here :


The install procedure is thoroughly explained in the README.

Keep in mind you should compile it towards xine-lib 1.2, which is out since a few days.

It works reliably with h.264 dvb-t streams on my D945GSEJT motherboard with not more than 30% CPU usage. The media player also works, even if it gets somewhat unresponsive when you try to fast forward or rewind some HD files.

I don't know if the vaapi driver for crystalhd is usable too.

I tried this install - got it all installed, and its being called up by vdr-sxfe but I'm not getting anything on the screen! I hear audio but no video? Any suggestions what might be going on here? I see the error failed to open broadcom Crystal HD but then further down it seems to be utilizing it?

[30825] [input_vdr] Data stream connected (TCP)
[30825] [input_vdr] WARNING: xine-engine setting "engine.buffers.audio_num_buffers":230 istoo low for HD-playback! Please use values between 500-1000! [30825] [input_vdr] WARNING: Video output driver reports it does not support unscaled overlays !
Running DIL (3.20.0) Version
DtsDeviceOpen: Opening HW in mode 0
Clock set to 180
DtsNotifyMode: Ioctl failed: 6
Notify Operating Mode Failed
DtsAllocIoctlData Error
Unable to detach from Dil shared memory ...
DtsDelDilShMem:Unable get shmid ...
crystalhd_h264: ERROR: Failed to open Broadcom Crystal HD
[mpeg2video @ 0x8928ca0]ac-tex damaged at 18 15
[mpeg2video @ 0x8928ca0]Warning MVs not available
[mpeg2video @ 0x8928ca0]concealing 924 DC, 924 AC, 924 MV errors
crystalhd_decoder.c: ffmpeg aspect ratio: 1.777778 3600

Press Esc to exit

[30839] [input_vdr] WARNING: xine-engine setting "engine.buffers.video_num_frames":15 is too small for some HD channels
[30842] [demux_vdr] PMT changed, resetting demuxer
    Last message repeated 1 times
[mpeg2video @ 0x8984810]mpeg_decode_postinit() failure
    Last message repeated 34 times
[mpeg2video @ 0x8984810]ac-tex damaged at 40 0
[mpeg2video @ 0x8984810]Warning MVs not available
[mpeg2video @ 0x8984810]concealing 3600 DC, 3600 AC, 3600 MV errors
crystalhd_decoder.c: ffmpeg aspect ratio: 1.777778 1501
    Last message repeated 73 times
[mpeg2video @ 0x8984810]ac-tex damaged at 57 0
[mpeg2video @ 0x8984810]Warning MVs not available
[mpeg2video @ 0x8984810]concealing 3592 DC, 3592 AC, 3592 MV errors
crystalhd_decoder.c: got first decoded picture size 1812

vdr mailing list

Reply via email to