Hi, Am 22.08.2012 13:24, schrieb Marx: > Because of many problems with three different TV cards I had prevoiusly - I > bought one which claims full linux support - > Qbox II by TBS. > After a few hours I have card working, hovewer I have a problem too. > When I'm recording it seems ok, but when I'm watching through streamdev + > VLC, there are errors about buffer overflow. > Often it causes viewing to stop after a minute or so. > I suspect there is need to set some larger buffers but I don't know where.
I have similar issues when using vlc (on Windows) and streamdev. I can watch 10 to 15 minutes without any problem and then vdr logs ring buffer overflows (just tested with ZDF HD/DVB-C). I hadn't time yet to debug this, but I suspect that decoding in vlc is a little bit too slow and vdr delivers data "too fast" (of course vdr will deliver with the right speed since it's receiving the original stream). Increasing buffers wouldn't resolve the problem, it will just take longer till the first overflow is hit. And I think it's independend to the dvb card. I use a Satelco EasyWatch and a Cine C/T. Lars. > > Aug 21 23:09:45 wuwek vdr: [5018] Streamdev: Accepted new client (HTTP) > 192.168.1.10:2734 > Aug 21 23:09:45 wuwek vdr: [5018] CAM 1: assigned to device 1 > Aug 21 23:09:47 wuwek vdr: [5009] max. latency time 3 seconds > Aug 21 23:09:51 wuwek vdr: [5030] streamdev-writer thread started (pid=5009, > tid=5030) > Aug 21 23:09:51 wuwek vdr: [5031] streamdev-livestreaming thread started > (pid=5009, tid=5031) > Aug 21 23:09:51 wuwek vdr: [5018] DVBAPI: 0.0 set CAM decrypt (SID 4807, caLm > 4, HasCaDescriptors 0) > Aug 21 23:09:52 wuwek vdr: [5032] receiver on device 1 thread started > (pid=5009, tid=5032) > Aug 21 23:09:52 wuwek vdr: [5033] TS buffer on device 1 thread started > (pid=5009, tid=5033) > Aug 21 23:09:52 wuwek vdr: [5018] Streamdev: Accepted new client (HTTP) > 192.168.1.10:2737 > Aug 21 23:09:52 wuwek vdr: [5030] ERROR: streamdev-server: couldn't send > 48504 bytes: Połączenie zerwane przez drugą stronę > Aug 21 23:09:52 wuwek vdr: [5030] streamdev-writer thread ended (pid=5009, > tid=5030) > Aug 21 23:09:53 wuwek vdr: [5018] client (HTTP) 192.168.1.10:2734 has closed > connection > Aug 21 23:09:53 wuwek vdr: [5018] streamdev-server: closing HTTP connection > to 192.168.1.10:2734 > Aug 21 23:09:53 wuwek vdr: [5031] streamdev-livestreaming thread ended > (pid=5009, tid=5031) > Aug 21 23:09:54 wuwek vdr: [5018] DVBAPI: 0.0 set CAM decrypt (SID 4807, caLm > 5, HasCaDescriptors 0) > Aug 21 23:09:54 wuwek vdr: [5018] buffer stats: 48692 (1%) used > Aug 21 23:09:54 wuwek vdr: [5034] streamdev-writer thread started (pid=5009, > tid=5034) > Aug 21 23:09:54 wuwek vdr: [5035] streamdev-livestreaming thread started > (pid=5009, tid=5035) > Aug 21 23:09:54 wuwek vdr: [5033] TS buffer on device 1 thread ended > (pid=5009, tid=5033) > Aug 21 23:09:54 wuwek vdr: [5032] buffer stats: 50384 (1%) used > Aug 21 23:09:54 wuwek vdr: [5032] receiver on device 1 thread ended > (pid=5009, tid=5032) > Aug 21 23:09:54 wuwek vdr: [5018] DVBAPI: 0.0 set CAM decrypt (SID 4807, caLm > 4, HasCaDescriptors 0) > Aug 21 23:09:54 wuwek vdr: [5036] receiver on device 1 thread started > (pid=5009, tid=5036) > Aug 21 23:09:54 wuwek vdr: [5037] TS buffer on device 1 thread started > (pid=5009, tid=5037) > Aug 21 23:09:54 wuwek vdr: [5015] Adding pid 208 (type 0xc0) RegDesc not > found -> assume AC-3 > Aug 21 23:09:54 wuwek vdr: [5015] Adding pid 213 (type 0xc1) RegDesc not > found -> assume AC-3 > Aug 21 23:09:54 wuwek vdr: [5015] Adding pid 1200 (type 0xc6) RegDesc not > found -> assume AC-3 > Aug 21 23:09:54 wuwek vdr: [5015] Adding pid 666 (type 0xc0) RegDesc not > found -> assume AC-3 > Aug 21 23:09:54 wuwek vdr: [5015] Adding pid 667 (type 0xc1) RegDesc not > found -> assume AC-3 > Aug 21 23:09:56 wuwek vdr: [5015] ERROR: 1 ring buffer overflow (188 bytes > dropped) > Aug 21 23:10:02 wuwek vdr: [5015] ERROR: 8 ring buffer overflows (1504 bytes > dropped) > Aug 21 23:10:09 wuwek vdr: [5015] ERROR: 10 ring buffer overflows (1880 bytes > dropped) > Aug 21 23:10:15 wuwek vdr: [5015] ERROR: 7 ring buffer overflows (1316 bytes > dropped) > > Marx > > Ps. I know why I get: > ERROR: streamdev: protocol violation (VTP) from 127.0.0.1:37275 > It's from vdradmin-am which seems incompatible with VDR 1.7.28 > > > _______________________________________________ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
