Hi, thanks for your hints so far, but before buying new cards i'd like to clarify if the problem is related to HW or SW.
Is there a way to detect from a recording if it was recorded on card 0 or card 1? Is there a way to code this into the recording name? Or is there any other way i can narrow the down what influences this problem? Best regards Torsten Am Sonntag, 13. Oktober 2013, 23:30:09 schrieb Torsten Mohr: > Hello, > > > I gave up on this card. It has been about 2 years since I last tried it, > > but the driver (mantis) had (and most likely still has) serious problems > > with some DMA timeouts, IIRC. > > Running irqbalance di help a little bit, but in the end I replaced the > > cards with something less broken. > > thanks for that hint. I spent some extra effort to get this card, it was > hardly available at all. > > These cards worked fine in my previous VDR, i never experienced problems > there. > > But on the other hand, what cards would you recommend? A double tuner would > be preferred (DVB-C). > > > Best regards > Torsten > > > _______________________________________________ > vdr mailing list > email@example.com > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list firstname.lastname@example.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr