Hi, using XBMC "streamdev client", i get successfully H264/AAC (video and audio) using VNSI (protocol version '3') nothing only message "No Signal"
--------- VDR log -------------------------- ... vdr: [971] VNSI: Creating new live Receiver vdr: [971] VNSI: Successfully switched to channel 16 - AB1 vdr: [971] VNSI: Started streaming of channel AB1 (timeout 10 seconds) vdr: [975] receiver on device 9 thread started (pid=694, tid=975, prio=high) vdr: [976] IPTV streamer thread started (pid=694, tid=976, prio=high) vdr: [974] cLiveStreamer stream processor thread started (pid=694, tid=974, prio=high) vdr: [724] changing pids of channel 16 from 216+217=2:317=@4:0:517 to 217+217=27:317=fra@17:0:0 vdr: [974] changing pids of channel 16 from 216+217=2:317=@4:0:517 to 217+217=27:317=fra@17:0:517 vdr: [974] VNSI: Created stream demuxer for pid=217 and type=8 vdr: [974] VNSI: Created stream demuxer for pid=317 and type=5 vdr: [976] IPTV streamer thread ended(pid=694, tid=976) vdr: [975] receiver on device 9 thread ended (pid=694, tid=975) vdr: [977] receiver on device 9 thread started (pid=694, tid=977, prio=high) vdr: [979] IPTV streamer thread started (pid=694, tid=979, prio=high) vdr: [731] VNSI: Requesting clients to reload channel list vdr: [974] VNSI: No Signal vdr: [971] VNSI: cxSocket::read: eof,connection closed streamer thread, receiver is no more attached vdr: [974] VNSI: exit streamer thread ... ----------------------------------------- because the channels is coming from vdr-iptv ? Or, VNSI not support H264/AAC channels coming from vdr-iptv plugins ? Thanks. vnsiserver (0.9.0) XBMC Media Center 12.2 vdr-iptv-2.0.0 VDR 2.0.2 _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
